@article { ISI:000240707800018, title = {Effect of annealing on properties of ZrSe2 thin films}, journal = {Journal of Crystal Growth}, volume = {294}, number = {2}, year = {2006}, month = {SEP}, pages = {254-259}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Thin films of ZrSe2 have been prepared on stainless steel and fluorine-doped tin oxide-coated glass substrates using electrodeposition technique at potentiostatic mode. Double-distilled water containing precursors Zr and Se with ethylene diamine tetra-acetic acid disodium salt as a complexing agent was used to obtain good quality deposits by controlling the rate of reaction. The preparative parameters such as concentration of bath, deposition time, bath temperature, pH of the bath and annealing temperature have been optimized using photoelectrochernical (PEC) technique. The films deposited at optimum preparative parameters are annealed at different temperatures. The film annealed at 200 degrees C shows more photosensitivity. The as-deposited and annealed films at 200 degrees C have been characterized by X-ray diffraction (XRD), energy dispersive analysis by X-ray (EDAX), optical absorption and scanning electron microscopy (SEM). The XRD analysis of the as-deposited and annealed films showed the presence of polycrystalline nature with hexagonal crystal structure. EDAX study reveals that deposited films are almost stoichiometric. Optical absorption study shows the presence of direct transition and band gap energies are found to be 1.5 and 1.38 eV, respectively, for the as-deposited and annealed films. SEM study revels that the grains are uniformly distributed over the surface of substrate for the as-deposited as well as annealed film, which indicates formation of good and compact type of crystal structure. (c) 2006 Elsevier B.V. All rights reserved.

}, keywords = {band gap, EDAX, Electrodeposition, PEC, SEM, XRD, ZrSe2 thin films}, issn = {0022-0248}, doi = {10.1016/j.jcrysgro.2006.06.018}, author = {Hankare, P. P. and Asabe, M. R. and Kokate, A. V. and Delekar, S. D. and Sathe, D. J. and Mulla, Imtiaz S. and Chougule, B. K.} } @article { ISI:000315127000035, title = {Biosynthesis of Se nanoparticles and its effect on UV-induced DNA damage}, journal = {Colloids and Surfaces B-Biointerfaces}, volume = {103}, year = {2013}, month = {MAR}, pages = {261-266}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

This paper reports, an environmentally benign procedure of synthesis and characterizations of selenium nanoparticles and their protective effect against UV-induced DNA damage activities. An aqueous leaf extract of lemon plant was used as a precursor for synthesis of colloidal selenium nanoparticles. Resulting nanoparticles were characterized using UV-vis spectrophotometer, photoluminescence, TEM, EDAX, FT-IR and XRD, respectively. Selenium colloidal solution exhibited an absorption maximum at 395 nm and produced an emission maximum at 525 nm. Transmission electron microscopy followed by selected area electron diffraction pattern analysis indicated the formation of spherical, polydispersed, crystalline, selenium nanoparticles of diameter ranging from (similar to 60 to 80 nm). X-ray diffraction studies showed the formation of 111, 2 0 0 and 220 planes of face-centered cubic (fcc) selenium. EDAX analysis confirmed the presence of selenium in nanosphere. Fourier transformed infrared spectroscopic investigation reveled the involvement of carboxyl (-C=0), hydroxyl (-OH), amine (-NH) functional group of lemon plant extract in preparation of selenium nano particles. MU assay as well single cell gel electrophoresis assay or comet assay revealed that synthesized selenium nanoparticles, caused less cell death of lymphocytes and prevented DNA damage, when cells were exposed to UVB. The fluorescent property of selenium nanopartides can be used as diagnostic agent. Further, their anti DNA damaging property can be investigated as a chemotherapeutic agent in cancer therapy. (C) 2012 Elsevier B.V. All rights reserved.

}, keywords = {Comet assay, EDAX, FT-IR, MTT assay, Selenium nanoparticles, UV-vis spectrophotometer}, issn = {0927-7765}, doi = {10.1016/j.colsurfb.2012.10.029}, author = {Prasad, Kumar Suranjit and Patel, Hirnee and Patel, Tirtha and Patel, Khusbu and Selvaraj, Kaliaperumal} } @article { ISI:000331737000012, title = {Biogenic synthesis of selenium nanoparticles and their effect on as(III)-induced toxicity on human lymphocytes}, journal = {Biological Trace Element Research}, volume = {157}, number = {3}, year = {2014}, month = {MAR}, pages = {275-283}, publisher = {HUMANA PRESS INC}, type = {Article}, address = {999 RIVERVIEW DRIVE SUITE 208, TOTOWA, NJ 07512 USA}, abstract = {

{A bioreductive capacity of a plant, Terminalia arjuna leaf extract, was utilized for preparation of selenium nanoparticles. The leaf extract worked as good capping as well as stabilizing agent and facilitated the formation of stable colloidal nanoparticles. Resulting nanoparticles were characterized using UV-Vis spectrophotometer, transmission electron microscopy (TEM), energy dispersive X-ray analysis (EDAX), Fourier transform infrared spectroscopy (FT-IR), and X-ray diffraction analysis (XRD), respectively. The colloidal solution showed the absorption maximum at 390 nm while TEM and selected area electron diffraction (SAED) indicated the formation of polydispersed, crystalline selenium nanoparticles of size raging from 10 to 80 nm. FT-IR analysis suggested the involvement of O-H, N-H

}, keywords = {Arsenite, Comet assay, EDAX, MTT assay, Selenium nanoparticles, Terminalia arjuna}, issn = {0163-4984}, doi = {10.1007/s12011-014-9891-0}, author = {Prasad, Kumar Suranjit and Selvaraj, Kaliaperumal} } @article { ISI:000364521100015, title = {Microbial selenium nanoparticles (SeNPs) and their application as a sensitive hydrogen peroxide biosensor}, journal = {Applied Biochemistry and Biotechnology}, volume = {177}, number = {6}, year = {2015}, month = {NOV}, pages = {1386-1393}, publisher = {HUMANA PRESS INC}, address = {999 RIVERVIEW DRIVE SUITE 208, TOTOWA, NJ 07512 USA}, abstract = {

The cell-free extract, a crude enzyme (cytosolic and membrane fraction) obtained from an environmental isolate, Bacillus pumilus sp. BAB-3706 worked as excellent in reducing as well as stabilizing agent and facilitated the formation of stable colloidal selenium nanoparticles (SeNPs). Resulting nanoparticles were characterized using UV-vis spectrophotometer, TEM, EDAX, FT-IR and XRD, respectively. A working electrode was modified by coating the surface of indium tin oxide (ITO) with colloidal SeNPs. Successive additions of H2O2 (100 to 600 mu M) in conventional three electrodes system, cyclic voltammeter with potential scan rate 25.0 mV/s, in 0.1 M phosphate buffer solution (PBS) yielded increase in current. A perpetual amperometric response at fixed potential (-1.0 V) and at selected time interval of 100 s showed different magnitude of current at every addition of H2O2. The linear range of detection of H2O2 was from 5 to 600 mM (R (2) = 0.9965), while the calculated limit of detection was found to be 3.00 mu M. The current study suggested that microbial SeNPs can be used for fabrication of low cost, sensitive H2O2 biosensor.

}, keywords = {Biosensor, EDAX, Hydrogen peroxide, Selenium nanoparticles, TEM, UV-vis spectroscopy}, issn = {0273-2289}, doi = {10.1007/s12010-015-1814-9}, author = {Prasad, Kumar Suranjit and Vaghasiya, Jayraj V. and Soni, Saurabh S. and Patel, Jitesh and Patel, Rinkesh and Kumari, Madhu and Jasmani, Falguni and Selvaraj, Kaliaperumal} } @article {46857, title = {Removal of fluoride from aqueous solution by mesoporous silica nanoparticles functionalized with chitosan derived from mushroom}, journal = {Journal of Macromolecular Science Part A-Pure and Applied Chemistry}, volume = {57}, year = {2020}, month = {SEP }, pages = {619-627}, type = {Article}, abstract = {

In the present study, chitosan functionalized mesoporous silica nanoparticles have been synthesized. Chitosan derived from an edible mushroom, Agaricus bisporus was used during synthesis of chitosan functionalized silica nanoparticles. The functionalized silica nanoparticles were subjected to fluoride sorption using a batch method which subsequently showed removal efficiency of 95\% with maximum sorption capacity, 58.8 mg/g. The characterization of nanoparticles was carried out by SEM, EDAX, XRD and FTIR analysis respectively. EDAX analysis suggested that oxygen, 51.83\% and silica 37.24\% was main constituent of the functionalized nanomaterials. XRD yielded characteristic diffraction pattern corresponding to the lattice planes (100), (110), (112), (120), (200) and (220) respectively. Sorption data was used to study equilibrium isotherm namely Langmuir and Freundlich model. The adsorption capacity increased with temperature while kinetics studies revealed that the adsorption process followed a pseudo-second-order rate equation. The enthalpy change (Delta H) and entropy change (Delta S) was found to be -31.36 kJmol(-1) and -7.75 Jmol(-1) K-1, showing endothermic and spontaneous nature of the fluoride adsorption. Data suggested that the nature of adsorption belonged to chemisorptions. The overall results suggested that the synthesized nanoparticles showed strong and specific affinity for fluoride and could be excellent adsorbents for defluoridation.

}, keywords = {Adsorption, Chitosan, EDAX, Fluoride, SEM}, issn = {1060-1325}, doi = {10.1080/10601325.2020.1738896, Early Access Date = MAY 2020}, author = {Srivastava, Anushree and Kumari, Madhu and Ramanathan, Alagappan and Selvaraj, Kaliaperumal and Prasad, Bablu and Prasad, Kumar Suranjit} }