@article { ISI:000240707800018, title = {Effect of annealing on properties of ZrSe2 thin films}, journal = {Journal of Crystal Growth}, volume = {294}, number = {2}, year = {2006}, month = {SEP}, pages = {254-259}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Thin films of ZrSe2 have been prepared on stainless steel and fluorine-doped tin oxide-coated glass substrates using electrodeposition technique at potentiostatic mode. Double-distilled water containing precursors Zr and Se with ethylene diamine tetra-acetic acid disodium salt as a complexing agent was used to obtain good quality deposits by controlling the rate of reaction. The preparative parameters such as concentration of bath, deposition time, bath temperature, pH of the bath and annealing temperature have been optimized using photoelectrochernical (PEC) technique. The films deposited at optimum preparative parameters are annealed at different temperatures. The film annealed at 200 degrees C shows more photosensitivity. The as-deposited and annealed films at 200 degrees C have been characterized by X-ray diffraction (XRD), energy dispersive analysis by X-ray (EDAX), optical absorption and scanning electron microscopy (SEM). The XRD analysis of the as-deposited and annealed films showed the presence of polycrystalline nature with hexagonal crystal structure. EDAX study reveals that deposited films are almost stoichiometric. Optical absorption study shows the presence of direct transition and band gap energies are found to be 1.5 and 1.38 eV, respectively, for the as-deposited and annealed films. SEM study revels that the grains are uniformly distributed over the surface of substrate for the as-deposited as well as annealed film, which indicates formation of good and compact type of crystal structure. (c) 2006 Elsevier B.V. All rights reserved.

}, keywords = {band gap, EDAX, Electrodeposition, PEC, SEM, XRD, ZrSe2 thin films}, issn = {0022-0248}, doi = {10.1016/j.jcrysgro.2006.06.018}, author = {Hankare, P. P. and Asabe, M. R. and Kokate, A. V. and Delekar, S. D. and Sathe, D. J. and Mulla, Imtiaz S. and Chougule, B. K.} } @article { ISI:000270410800024, title = {Influence of process variables on growth of ZnO nanowires by cathodic electrodeposition on zinc substrate}, journal = {Thin Solid Films}, volume = {517}, number = {24}, year = {2009}, month = {OCT}, pages = {6605-6611}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Influence of the deposition duration and electrolyte concentration on the structural and morphological features of the ZnO thin films, grown by cathodic electrodeposition on zinc substrate followed by annealing in air at 400 degrees C, have been investigated. The surface morphology of the as-synthesized films shows two distinct features, presence of {\textquoteleft}2-dimensional nanosheets{\textquoteright} on the area near the electrolyte-air interface and {\textquoteleft}granular{\textquoteright} nanostructures, below the interface region. However, upon annealing, the formation of ZnO nanowires, possessing length of several microns and diameter less than 20 nm, on the entire substrate is observed. The X-ray and selected area electron diffraction patterns clearly confirm the polycrystalline nature of the ZnO nanowires. (C) 2009 Elsevier B.V. All rights reserved.

}, keywords = {Annealing, Electrodeposition, Nanowires, photoluminescence, scanning electron microscopy, transmission electron microscopy, Zinc oxide}, issn = {0040-6090}, doi = {10.1016/j.tsf.2009.04.046}, author = {Sheini, Farid Jamali and Mulla, Imtiaz S. and Joag, Dilip S. and More, Mahendra A.} } @article {46898, title = {Nafion lonomer-based single component electrolytes for aqueous Zn/MnO2 batteries with long cycle life}, journal = {ACS Sustainable Chemistry \& Engineering}, volume = {8}, year = {2020}, month = {APR }, pages = {5040-5049}, type = {Article}, abstract = {

Recently, aqueous rechargeable Zn/MnO2 batteries are emerging as promising energy storage aids owing to their improved safety, low cost of fabrication, and high energy density. However, the rapid decay of capacity during extended charge- discharge cycles hinders the prospect of this technology beyond lab-scale. In the conventional Zn/MnO2 cell, additives such as Mn2+ have been used to tackle the stability issue. Here, we demonstrate that cycling performance of the Zn/MnO2 cell can be improved substantially by using Nafion ionomer as the separator in combination with zinc-ion conducting electrolytes. The Nafion ionomer-based Zn/MnO2 cells do not require any Mn{\textquoteright} additive in the electrolyte and hence termed as {\textquoteleft}{\textquoteleft}single component{\textquoteright}{\textquoteright} electrolytes. The postmortem study of the post-cycled electrodes reveals that the structural evolution of both the anode and cathode in various electrolytes (1 M Zn(CF3SO3)(2), 1 M ZnSO4 center dot 7H(2)O, and 3 M ZnSO4 center dot 7H(2)O) during prolonged cycling significantly influences the cycle life of the respective cells. Optimizing the Nafion ionomer membrane with a suitable electrolyte could render the desired combination of high capacity and high cycle life for a Zn/MnO2 cell.

}, keywords = {aqueous Zn-ion batteries, Cycling stability, dendrite suppression, Electrodeposition, MnO2, Nafion ionomer separator, single component electrolyte}, issn = {2168-0485}, doi = {10.1021/acssuschemeng.9b06798}, author = {Ghosh, Meena and Vijayakumar, Vidyanand and Anothumakkool, Bihag and Kurungot, Sreekumar} } @article {47341, title = {Bimetallic ZnFe2O4 nanosheets prepared via electrodeposition as binder-free high-performance supercapacitor electrodes}, journal = {Applied Surface Science}, volume = {559}, year = {2021}, month = {SEP }, pages = {149951}, type = {Article}, abstract = {

Binder-free bimetallic ZnFe2O4 nanosheets were fabricated using one-step electrodeposition, which facilitated excellent electrical contact between the ZnFe2O4 nanosheets and the nickel substrate. The resultant numerous ZnFe2O4 nanosheets with their cubic spinel structures promote interfacial activity to enhance the electrochemical and Faradaic redox reactions. The metallic Zn and Fe from the cubic spinel structure of ZnFe2O4 attract electrolytic ions and increase the energy-storage capability, thus yielding a specific capacitance of 1093 F.g(-1) at a current rate of 1 A.g(-1). Different samples were prepared by varying the amount of metal salts in the electrodeposition solution while maintaining a constant ZnNt:FeSO4 concentration ratio of 1:2 for all cases. The optimal electrode composition, which yielded an energy density of 54 Wh.kg(-1) and a capacitance retention of 93.5\% at N = 5000 charge-discharge cycles, was identified.

}, keywords = {Bimetallic, Electrodeposition, Energy storage device, supercapacitor, ZnFe2O4 nanosheet}, issn = {0169-4332}, doi = {10.1016/j.apsusc.2021.149951}, author = {Joshi, Bhavana and Samuel, Edmund and Park, Chanwoo and Kim, Yongil and Lee, Hae-Seok and Yoon, Sam S.} } @article {48022, title = {Electrochemically tuned synergistic nano-interface of a tertiary Ni(OH)(2)-NiO(OH)/NixP heterojunction material for enhanced and durable alkaline water splitting}, journal = {ChemistrySelect}, volume = {7}, year = {2022}, month = {AUG}, pages = {e202201171}, type = {Article}, abstract = {

Making water splitting cheaper is the need of the hour.The present work reports a nickel-based, non-precious catalytic system, synthesized by a two-step electrodeposition (ED) process followed by a short-term heat treatment. The Ni(OH)(2)-NiO(OH)/NixP heterojunction has been synthesized and optimized through an unprecedented, energy-conserving method to achieve its best OER performance. Further, it has been carefully tuned for the first time by thoroughly optimizing the ED parameters to exhibit Hydrogen Evolution Reaction (HER). At high current regimes, the performance surpassed that of the Ru/C and Pt/C (\>= 500 mA and \>= 600 mA) respectively. The full cell electrolyzer configuring NOPO||NOPH further establishes the supremacy of the present electrocatalysts over the benchmark Ru/C||Pt/C. Moreover, the present electrocatalyst displayed 60 and 70 hours of HER and OER performances at -100 mA and 100 mA currents respectively. In short, this work is an example that illustrates how a single chemical system gets to exhibit two complementary catalytic behaviors that is, water oxidation and reduction when certain synthetic parameters are meticulously optimized.

}, keywords = {Electrodeposition, heterojunction, Ni(OH)(2)-NiO(OH), NixP, non-precious metal, water splitting}, issn = {2365-6549}, doi = {10.1002/slct.202201171}, author = {Manappadan, Zinoy and Selvaraj, Kaliaperumal} } @article {48979, title = {Electrodeposited Co-Mn-Sn multicomponent alloy as an efficient electrocatalyst for hydrogen evolution reaction}, journal = {International Journal of Hydrogen Energy}, volume = {49}, year = {2024}, month = {JAN }, pages = {658-667}, type = {Article}, abstract = {

Despite having exciting material characteristics, the potential of multi-component alloys (MCAs) as electrocatalysts has not been fully realized. In this work, efficient binary and ternary MCA electrocatalysts containing inexpensive metals like Co, Mn and Sn have been prepared via the electrodeposition process. When tested for hydrogen evolution reaction (HER) in an alkaline medium, ternary Co-Mn-Sn alloy displayed enhanced activity with the lowest overpotential of 136 mV, a Tafel slope of 111 mV dec 1 and a very low charge transfer resistance, making it superior to the binary alloys (Co-Mn and Co-Sn), or the single metal catalysts (Co, Mn and Sn). The ternary alloy also displayed high electro-chemical and structural stability, making it a viable electrocatalyst for the hydrogen economy.(c) 2023 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

}, keywords = {Clean energy, electrocatalysis, Electrodeposition, hydrogen evolution reaction, Multi-component alloy, Non-platinum group metals}, issn = {0360-3199}, doi = {10.1016/j.ijhydene.2023.07.064}, author = {Chandran, M. Athira and Karumuthil, Subash Cherumannil and Singh, Ashutosh K. and Prasad, Bhagavatula L. V.} } @article {49264, title = {Influence of deposition potential on electrodeposited bismuth-copper oxide electrodes for asymmetric supercapacitor}, journal = {BATTERIES \& SUPERCAPS}, volume = {7}, year = {2024}, month = {JUN}, type = {Journal Article}, keywords = {Bi2CuO4, Deposition Potential, Electrodeposition, supercapacitor, thin film}, doi = {10.1002/batt.202400163}, author = {Bobade, Rushikesh G. and Dabke, Niteen B. and Shaikh, Shoyebmohamad F. and Al-Enizi, Abdullah M. and Pandit, Bidhan and Lokhande, Balkrishna J. and Ambare, Revanappa C.} } @article {49051, title = {Nanocrystalline (NixCo(1-x))3(PO4)2@FeSe2/NF as a promising OER electrocatalyst for alkaline water electrolysis}, journal = {International Journal of Hydrogen Energy}, volume = {59}, year = {2024}, month = {MAR}, pages = {74-81}, type = {Article}, abstract = {

Affordable and sustainable hydrogen production is the need of the hour owing to the mounting global pursuit for the hydrogen economy. Water splitting is the premier go -to method to produce green hydrogen at a larger scale in which the half -cell Oxygen Evolution Reaction (OER) demands a larger amount of energy expenditure due to its sluggish kinetics. Hence, designing an efficient OER electrocatalyst, especially for alkaline water electrolysis that offers alternatives to the usage of precious group metals is a pressing priority. Herein, we report a novel nanocrystalline electrocatalyst consisting of two components, namely cobalt nickel phosphate and iron diselenide synthesised via a two-step electrodeposition at room temperature. The combination of the two components on the porous nickel foam substrate exhibits an overpotential of 272 mV at 100 mA/cm2 in 1 M KOH showing a low Tafel slope of a mere 38 mV/dec with appreciable retention even after 24 h of stability test at a relatively higher current density. The surface reconstruction that occurs when FeSe2 is electrodeposited on (Ni0.35Co0.65)3(PO4)2@NF and the synergy between the two components is the primary reason for the improved performance. Thus, this work highlights the ambient synthesis of a highly durable earth -abundant metal -based electrocatalyst which exceeds the performance of the standard Ru/C by a decent margin.

}, keywords = {Alkaline Water Electrolysis, Ambient synthesis, Electrodeposition, Non-PGM based Electrocatalyst, OER}, issn = {0360-3199}, doi = {10.1016/j.ijhydene.2024.01.264}, author = {Christi, Darren Sebastian and Selvaraj, Kaliaperumal} } @article {49339, title = {Tensile nanostructured hierarchically porous non-precious transition metal-based electrocatalyst for durable anion exchange membrane-based water electrolysis}, journal = {Journal of Colloid and Interface Science}, volume = {664}, year = {2024}, month = {JUN }, pages = {389-399}, type = {Article}, abstract = {

Electrochemical water electrolysis is a promising method for sustainable hydrogen production while transiting towards hydrogen economy. Among many, the Anion Exchange Membrane (AEM) based water electrolyzer is an emerging yet potentially affordable technology on maturity for producing large-scale hydrogen accommodating the usage of Non-Platinum Group Metal (non-PGM) based inexpensive electrocatalysts. Herein, we demonstrate the excellent performance of a bifunctional Nickel Copper Phosphide-Nickel sulphide (NCP-NS) electrocatalyst with a unique tensile nanostructure obtained via a facile, controlled ambient galvanic displacement route. An AEM electrolyzer with a larger active area of 10 cm(2) stacked with the symmetric NCP-NS electrodes and a membrane demonstrates scalability with a requirement of a mere 1.66 V to reach a current density of 10 mA cm(-2). The nickel-copper phosphide boosts the kinetics of charge transfer between the electrode and electrolyte interface, while a unique combination of a few nickel sulphide phases present in the catalyst provides sufficiently appropriate active sites for the overall water electrolysis. For the first time, we report a room temperature performance of similar to 230 mA cm(-2) at 2 V for a non-PGM-based bifunctional electrocatalyst with exceptional durability for over 300 h of operation in an AEM water electrolyser with a retention rate of 95 \%-97 \% at a current density range of 80-800 mA cm(-2).

}, keywords = {AEM electrolyzer, Bifunctionality, Electrodeposition, Non-PGM based Electrocatalyst, stability}, issn = {0021-9797}, doi = {10.1016/j.jcis.2024.02.170}, author = {Singh, Kailash and Selvaraj, Kaliaperumal} } @article {49903, title = {Platinum-free electrocatalysts based on electrodeposited Co-Mn-Ni alloys for efficient electrocatalytic alkaline water splitting}, journal = {ACS Applied Energy Materials}, volume = {8}, year = {2025}, month = {AUG }, pages = {11633-11642}, type = {Article}, abstract = {

The development of a Pt-free electrocatalyst for efficient and stable water splitting is crucial for the commercialization of green hydrogen production. A low-cost electrocatalyst with good hydrogen and oxygen evolution activities (HER and OER, respectively) displaying long durability is the first step in this direction, and if the catalyst can be synthesized via an easy, convenient, and scalable procedure, that would be an added advantage. Multicomponent alloys, with their tunable compositions and abundant active sites, present a promising solution in this direction. Herein, a cost-effective CoMnNi (CMN) alloy is synthesized via electrodeposition and with optimized composition by tuning the electrolyte concentration and deposition potential to enhance electrocatalytic performance. The resulting single-phase alloy exhibits a high electrochemical surface area with an average particle size of similar to 4 nm, demonstrating excellent hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) activities in 1 M KOH, with overpotentials of 121 mV at -10 mA cm-2 and 285 mV at 20 mA cm-2, respectively. Moreover, the catalyst exhibits remarkable stability, sustaining 100 h of operation at 100 mA cm-2. The CMN alloy also performs efficiently under harsh conditions, including 6 M KOH and alkaline seawater, in both symmetric and asymmetric cell configurations. This work highlights the potential of multicomponent alloys as durable, high-performance electrocatalysts for scalable water splitting, paving the way for sustainable hydrogen production.

}, keywords = {alkaline seawater, electrocatalysis, Electrodeposition, hydrogen evolution reaction(HER), multicomponentalloy, oxygen evolution reaction (OER), stability, watersplitting}, issn = {2574-0962}, doi = {10.1021/acsaem.5c01775}, author = {Chandran, M. Athira and Dutta, Pritha and Singh, Ashutosh K. and Prasad, Bhagavatula L. V.} }