@article { ISI:000241854900005, title = {Viscoelastic and dielectric behavior of poly(1-butene)/multiwalled carbon nanotube nanocomposites}, journal = {Journal of Macromolecular Science Part B-Physics}, volume = {45}, number = {6}, year = {2006}, month = {NOV}, pages = {1053-1064}, publisher = {TAYLOR \& FRANCIS INC}, type = {Article}, address = {325 CHESTNUT ST, SUITE 800, PHILADELPHIA, PA 19106 USA}, abstract = {

Linear viscoelastic properties and dielectric behavior of poly(1-butene)/multiwalled carbon nanotube (MWCNT) nanocomposites were investigated. Dynamic mechanical analysis showed significant increase in storage modulus in the rubbery regime. The tan delta peak temperature remained constant; however, the peak intensity was lowered for the nanocomposites. In melt rheological studies the nanocomposites showed a shift in crossover frequency to the lower side, suggesting delayed relaxation of the molecular chains in the presence of MWCNT and this shift was found to depend on the content of MWCNT. The dielectric constant increased from 2.2 to 70 for the nanocomposite with 7 wt. \% MWCNT. The electrical conductivity increased significantly, from 10(-15) to 10(-3) S/cm. The results of rheology and dielectric studies indicate that a percolation network is formed that is responsible for the observed changes.

}, keywords = {Dielectric, MWCNT, poly(1-butene), viscoelastic}, issn = {0022-2348}, doi = {10.1080/00222340600929691}, author = {Wanjale, Santosh D. and Jog, Jyoti Prakash} } @article { ISI:000207804200008, title = {Single step synthesis and properties of M/MFe2O4 and PVDF/M/MFe2O4 (M = Co, Ni) magnetic nanocomposites}, journal = {Science of Advanced Materials}, volume = {1}, number = {3}, year = {2009}, month = {DEC}, pages = {262-268}, publisher = {AMER SCIENTIFIC PUBLISHERS}, address = {26650 THE OLD RD, STE 208, VALENCIA, CA 91381-0751 USA}, abstract = {

Metal/ferrite nanocomposites (M/MFe2O4; M = Co, Ni), consisting of nanoparticles of a metal and the corresponding metal ferrite, have been synthesized under in situ conditions by a simple and single step process. The metal/ferrite nanocomposites embedded in a polymer matrix have been prepared by a simple hot-pressing method. The performance parameters such as magnetization, coercivity, permeability and dielectric constant of the two- and three-phase nanocomposite systems are compared. The coercivity increases and the permeability decreases with increasing polymer content in the three-phase composite. Enhancement of the dielectric constant is observed at low frequencies.

}, keywords = {Dielectric, Ferrite, magnetic properties, Nanocomposite, Nanocrystalline, permeability}, issn = {1947-2935}, doi = {10.1166/sam.2009.1053}, author = {Deka, Sasanka and Joy, Pattayil Alias and Kumar, A. Pratheep} } @article { ISI:000285674000014, title = {Investigations of magnetic and dielectric properties of cupric oxide nanoparticles}, journal = {Solid State Communications}, volume = {151}, number = {1}, year = {2011}, month = {JAN}, pages = {55-60}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Cupric oxide nanoparticles of similar to 8-10 nm width and 40-45 nm length self assembled as large particles similar to 1-1 5 mu m have been investigated in the 10-325 K temperature range using magnetic and dielectric measurements In magnetic measurements a single broad peak at similar to 230 K in a zero field cooled sample has been observed Coercivity in magnetization measurements at 10 K suggests that the nanoparticles are core-shell type particles with an antiferromagnetic core and a ferromagnetic shell Dielectric measurements at various frequencies from 3 7 Hz to 949 kHz exhibit a sharp peak at 284 K followed by weak anomalies around 213 and 230 K (C) 2010 Elsevier Ltd All rights reserved

}, keywords = {CuO nanoparticles, Dielectric, Ferroelectric transition, Ferromagnetic}, issn = {0038-1098}, doi = {10.1016/j.ssc.2010.10.024}, author = {Bhalerao-Panajkar, Rohini S. and Shirolkar, Mandar M. and Das, Raja and Maity, Tuhin and Poddar, Pankaj and Kulkarni, S. K.} } @article {47747, title = { Flexible energy harvester from an organic ferroelectric ammonium salt}, journal = {Chemistry-An Asian Journal}, volume = {16}, year = {2021}, month = {DEC }, pages = {4122-4129}, type = {Article}, abstract = {Organic ferroelectrics due to their low cost, easy preparation, light weight, high flexibility and phase stability are gaining tremendous attention in the field of portable electronics. In this work, we report the synthesis, structure and ferroelectric behavior of a two-component ammonium salt 2, containing a bulky [Bn(4-BrBn)NMe2](+) (Bn=benzyl and 4-BrBn=4-bromobenzyl) cation and tetrahedral (BF4)(-) anion. The structural analysis revealed the presence of rich non-classical C-H...F and C-H...Br interactions in this molecule that were quantified by Hirshfeld surface analysis. The polarization (P) vs. electric field (E) hysteresis loop measurements on 2 gave a remnant polarization (P-r) of 14.4 mu C cm(-2) at room temperature. Flexible polymer composites with various (5, 10, 15 and 20) weight percentages (wt\%) of 2 in thermoplastic polyurethane (TPU) were prepared and tested for mechanical energy harvesting applications. A notable peak-to-peak output voltage of 20 V, maximum current density of 1.1 mu A cm(-2) and power density of 21.1 mu W cm(-2) were recorded for the 15 wt\% 2-TPU composite device. Furthermore, the voltage output generated from this device was utilized to rapidly charge a 100 mu F capacitor, with stored energies and measured charges of 156 mu J and 121.6 mu C, respectively.}, keywords = {Dielectric, energy harvesting, ferroelectricity, organic composites, piezoelectric}, issn = {1861-4728}, doi = {10.1002/asia.202101128}, author = {Gupta, Rishabh and Sahoo, Supriya and Deswal, Swati and Kothavade, Premkumar and Dixit, Prashant and Zareba, Jan K. and Shanmuganathan, Kadhiravan and Boomishankar, Ramamoorthy} }