@article { ISI:000255295700013, title = {Photocatalytic decomposition of methylene nanocrystalline titania prepared by different blue on methods}, journal = {Materials Research Bulletin}, volume = {43}, number = {5}, year = {2008}, month = {MAY}, pages = {1145-1152}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Nanocrystalline particles of pure anatase titania were prepared by two different methods. One is the sol-gel method at ambient temperature using ultrasonication (TiO2-SG-US) and conventional stirring method (TiO2-SG-S) and the other by surfactant assisted hydrothermal synthesis (TiO2-HT). More uniform distribution/dispersion of the nanoparticles (SEM), marginally higher surface area, better thermal stability and phase purity are some of the advantages of preparation of nanocrystalline titania by sol gel ultrasonication method and hydrothermal synthesis method. The behavior of anatase titania in photocatalytic decomposition of methylene blue in aqueous medium was studied as a function of the method of preparation and the crystallite size. The nanoparticles prepared by ultrasonication method were more effective than both, the sample prepared by conventional stirring method and commercial Degussa P-25. The higher photocatalytic activity of TiO2-SG-US is attributed to the more uniform size of the particles as compared to TiO2-SG-S samples. Both TEM and XRD data on TiO2-HT samples reveal a uniform and nanocrystalline TiO2 particles, which showed photocatalytic activity in both UV and visible region although brookite phase was also present. (C) 2007 Elsevier Ltd. All rights reserved.

}, keywords = {Catalytic properties, Nanostructures, Sol-gel chemistry}, issn = {0025-5408}, doi = {10.1016/j.materresbull.2007.06.003}, author = {Ramaswamy, Veda and Jagtap, Neelam and Vijayanand, S. and Bhange, Deu S. and Awati, Preeti} } @article { ISI:000281347500022, title = {Surface texture and specific adsorption sites of sol-gel synthesized anatase TiO2 nanoparticles}, journal = {Materials Research Bulletin}, volume = {45}, number = {10}, year = {2010}, month = {OCT}, pages = {1470-1475}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

The surface properties of sot-gel synthesized anatase titania (TiO2) nanoparticles are probed by sorptiometry, infrared absorption spectroscopy, UV-vis diffuse reflectance spectroscopy and high resolution transmission electron microscopy. The results reveal strong correlations of the surface area, porosity, pyridine adsorption capacity and strength, and catalytic methylbutynol decomposition activity. (C) 2010 Elsevier Ltd. All rights reserved.

}, keywords = {Catalytic properties, Nanostructures, Oxides, Sol-gel chemistry, X-ray diffraction}, issn = {0025-5408}, doi = {10.1016/j.materresbull.2010.06.026}, author = {Zaki, Mohamed I. and Mekhemer, Gamal A. H. and Fouad, Nasr E. and Jagadale, Tushar C. and Ogale, Satishchandra B.} } @article { ISI:000289763700026, title = {Low temperature pH dependent synthesis of flower-like ZnO nanostructures with enhanced photocatalytic activity}, journal = {Materials Research Bulletin}, volume = {46}, number = {5}, year = {2011}, month = {MAY}, pages = {771-778}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

In the present study we have synthesized flower-like ZnO nanostructures comprising of nanobelts of 20 nm width by template and surfactant free low-temperature (4 degrees C) aqueous solution route. The ZnO nanostructures exhibit flower-like morphology, having crystalline hexagonal wurtzite structure with (001) orientation. The flowers with size between 600 and 700 nm consist of ZnO units having crystallite size of similar to 40 nm. Chemical and structural characterization reveals a significant role of precursor: ligand molar ratio, pH, and temperature in the formation of single-step flower-like ZnO at low temperature. Plausible growth mechanism for the formation of flower-like structure has been discussed in detail. Photoluminescence studies confirm formation of ZnO with the defects in crystal structure. The flower-like ZnO nanostructures exhibit enhanced photochemical degradation of methylene blue (MB) with the increased concentration of ligand, indicating attribution of structural features in the photocatalytic properties. (C) 2010 Elsevier Ltd. All rights reserved.

}, keywords = {Catalytic properties, Defects, Nanostructures, Optical properties, Semiconductor}, issn = {0025-5408}, doi = {10.1016/j.materresbull.2010.11.007}, author = {Vaishampayan, Mukta V. and Mulla, Imtiaz S. and Joshi, Satyawati S.} } @article { ISI:000289763700002, title = {Novel solar light driven photocatalyst, zinc indium vanadate for photodegradation of aqueous phenol}, journal = {Materials Research Bulletin}, volume = {46}, number = {5}, year = {2011}, month = {MAY}, pages = {635-638}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

In the present investigation, we have demonstrated the synthesis of novel photocatalyst, zinc indium vanadate (ZIV) by solid solid state route using respective oxides of zinc, indium and vanadium. This novel photocatalyst was characterized using XRD, FESEM, UV-DRS and FTIR in order to investigate its structural, morphological and optical properties. XRD clearly shows the formation of phase pure ZIV of triclinic crystal structure with good crystallinity. FESEM micrographs showed the clustered morphology having particle size between 0.5 and 1 mu m. Since, optical study showed the band gap around 2.8 eV, i.e. in visible region, we have performed the photocatalytic activity of phenol degradation under visible light irradiation. The photodecomposition of phenol by ZIV is studied for the first time and an excellent photocatalytic activity was obtained using this novel photocatalyst. Considering the band gap of zinc indium vanadate in visible region, it will also be the potential candidate for water splitting. (C) 2011 Elsevier Ltd. All rights reserved.

}, keywords = {Catalytic properties, Chemical synthesis, Oxides, X-ray diffraction}, issn = {0025-5408}, doi = {10.1016/j.materresbull.2011.02.005}, author = {Mahapure, Sonali A. and Rane, Vilas H. and Ambekar, Jalindar D. and Nikam, Latesh K. and Marimuthu, R. and Kulkarni, Milind V. and Kale, Bharat B.} } @article { ISI:000303485400020, title = {Effects of grain morphology, microstructure and dispersed metal cocatalyst on the photoreduction of water over impurity-doped LaInO3}, journal = {Materials Research Bulletin}, volume = {47}, number = {5}, year = {2012}, month = {MAY}, pages = {1217-1228}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

The single phase lanthanum indates doped with Ga (for La) and N (for O), i.e. La1-xGaxInO3 (0 \<= x \<= 0.2) and LaInO1-yNy (y similar to 0.6), exhibit significant activity for photoreduction of water; the yield of H-2 produced depending on dopant, excitation source, and addition of a sacrificial reagent. The two-step H-2 evolution observed for this reaction corresponds with the two distinct absorbance regimes displayed by these materials, one in UV-region due to bandgap excitation and the other in visible region arising from the transitions involving sub-bandgap donor or acceptor energy states. The photocatalytic activity of these d(10) metal oxides increases on coating with a metal/metal oxide co-catalyst, gold exhibiting superior activity to Pt and NiO, irrespective of excitation source and sample composition. The preparation-controlled particle morphology, doping-induced lattice imperfections, and metal/semiconductor hetero-junctions are envisaged to play a key role in the absorption characteristics and photocatalytic water reduction activity of metal/LaInO3 nanocomposites. (C) 2012 Elsevier Ltd. All rights reserved.

}, keywords = {Catalytic properties, Chemical synthesis, Electron microscopy, Interfaces, Semiconductors}, issn = {0025-5408}, doi = {10.1016/j.materresbull.2012.01.031}, author = {Dhanasekaran, P. and Gupta, N. M.} } @article { ISI:000374195700036, title = {Photocatalytic degradation of methylene blue on Sn-doped titania nanoparticles synthesized by solution combustion route}, journal = {Materials Research Bulletin}, volume = {76}, year = {2016}, month = {APR}, pages = {264-272}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Series of tin-doped titania nanoparticles with varying tin content in the range 0-20 mol\% have been prepared by solution combustion synthesis route using urea as a fuel. The structure, surface morphology and optical activity of Sn-doped TiO2 nanoparticles were investigated by various analytical techniques such as powder XRD, SEM, TEM, UV-vis and N-2 adsorption study. The crystalline structures of the various phases were studied by rietveld refinement of the XRD data. The photocatalytic performance of Sn-doped titania nanoparticles were tested for degradation of MB under UV and visible light irradiation. The results reveal that the photocatalytic activity increases with increase in tin content which may be due to decrease in crystallite size with increase in surface area. The doping of Sn into TiO2 lattice hinders the recombination of electrons and holes thus enhance the quantum efficiency of photocatalytic reaction. (C) 2015 Elsevier Ltd. All rights reserved.

}, keywords = {Catalytic properties, composites, Nanostructures, X-ray diffraction}, issn = {0025-5408}, doi = {10.1016/j.materresbull.2015.12.041}, author = {Bhange, P. D. and Awate, S. V. and Gholap, Ramkrishna S. and Gokavi, G. S. and Bhange, Deu S.} }