@article { ISI:000307972400024, title = {Adsorption of methylene blue using green pea peels (Pisum sativum): a cost-effective option for dye-based wastewater treatment}, journal = {Biotechnology and Bioprocess Engineering}, volume = {17}, number = {4}, year = {2012}, month = {AUG}, pages = {862-874}, publisher = {KOREAN SOC BIOTECHNOLOGY \& BIOENGINEERING}, address = {KOREAN SCIENCE TECHNOLOGY CENTER, \#704 YEOGSAM-DONG, KANGNAM-KU, SEOUL 135-703, SOUTH KOREA}, abstract = {

Methylene blue (MB), a common toxic dye, is largely discharged from dyeing processes for acrylic, nylon, silk, and woolen fabrics in textile industries. While application of conventional removal processes like chemical precipitation, ion exchange, commercial activated carbon adsorption, etc often become cost-prohibitive, the adsorption of MB by abundantly available green pea peel (GPP: Pisum sativum) derived and acid-treated carbon (GPP-AC) has proved to be a cost-attractive option in the present study. The physicochemical and morphological characteristics of GPP-AC were examined with the help of XRD, BET surface area, SEM, and Fourier transform infrared spectrophotometry ((FT-IR) analysis. The influences of such adsorption parameters as initial dye concentration, pH, contact time, adsorbent dosage, agitation speed, particle size, and temperature were evaluated and optimized. The equilibrium contact time for maximum adsorption of MB on to GPPAC was found to be 7 h. The equilibrium data of the adsorption process were modeled by using the Langmuir, Freundlich, Temkin, and Dubinin-Raduskevich (D-R) isotherms. However, the adsorption equilibrium data were best described by the Langmuir Isotherm model, with a maximum adsorption capacity of 163.94 mg MB/g GPPAC at 30A degrees C.

}, keywords = {Adsorption, Dubinin-raduskevich, Freundlich, green peas peels, Isotherms, Langmuir, Methylene blue, Temkin}, issn = {1226-8372}, doi = {10.1007/s12257-011-0614-5}, author = {Dod, Ramesh and Banerjee, Goutam and Saini, S.} } @article { ISI:000310257100019, title = {Alumina supported carbon composite material with exceptionally high defluoridation property from eggshell waste}, journal = {Journal of Hazardous Materials}, volume = {237}, year = {2012}, month = {OCT}, pages = {161-169}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

A new alumina supported carbon composite material called {\textquoteleft}{\textquoteleft}Eggshell Composite{\textquoteright}{\textquoteright} (EC) was synthesized from eggshell waste as calcium source for selective fluoride adsorption from water. The effect of various synthesis parameters like eggshell (ES): Eggshell membrane (ESM) ratio, aluminium loading, mixing time and calcinations temperature to optimize the synthesis conditions for selective fluoride removal has been studied. It was observed that the synthesis parameters have significant influence on development of EC and in turn on fluoride removal capacity. EC synthesized was characterized for elemental composition, morphology, functionality and textural properties. Results showed that EC obtained from eggshell modified with alumina precursor is more selective and efficient for fluoride removal. Langmuir and Freundlich isotherm were used to obtain ultimate fluoride removal capacity. The calcium and alumina species in EC shows synergistic effect in fluoride adsorption process. Fluoride sorption studies were carried out in synthetic, groundwater and wastewater. EC proved to be a potential, indigenous and economic adsorbent for fluoride removal. (C) 2012 Elsevier B.V. All rights reserved.

}, keywords = {Composite material, Eggshell, Eggshell membrane, Fluoride adsorption, Langmuir}, issn = {0304-3894}, doi = {10.1016/j.jhazmat.2012.08.023}, author = {Lunge, Sneha and Thakre, Dilip and Kamble, Sanjay and Labhsetwar, Nitin K. and Rayalu, Sadhana} } @article {48975, title = {Etherification of biomass-derived glycerol to oxygenated fuel additives using dodecatungstophosphoric-silica-supported catalyst: characterization and kinetic studies}, journal = {Biomass Conversion and Biorefinery }, volume = {13}, year = {2023}, month = {NOV}, pages = {16285-16295}, type = {Article}, abstract = {

Commercial biodiesel production is becoming popular due to its sustainability and reduced greenhouse gas emissions in comparison to fossil fuels. Biodiesel production involves the co-generation of crude glycerol that is not directly viable. Valorization of glycerol is essential from techno-economic perspective to achieve goals of circular economy. In this study, the glycerol etherification was carried out using tert-butyl alcohol in presence of dodecatungstophosphoric/silica (DTP/SiO2) catalyst for production of tert-butyl glycerol ethers that can be used as fuel additives. A series of DTP/SiO2 catalysts were prepared with various compositions by impregnating heteropoly acids (HPA, H3PW12O40). The product analysis was performed to monitor mono-, di-, and tri-tert-butyl glycerol ethers. The kinetic studies were conducted based on Langmuir-Hinshelwood model. The rate constants were determined from experimental data by regression analysis. The catalysts were characterized by X-ray diffraction, SEM/EDX, and thermogravimetric analysis. Varying DTP loadings resulted in different catalytic activities. Activation energy (38.23 kJ/mol), activation enthalpy (25.94 kJ/mol), activation entropy (-163.8 J/mol/K), and Gibbs free energy of activation (88.67 kJ/mol) were attained for DTP/SiO2 (20\%) catalyst that exhibited the best selectivity for di-tert-butyl glycerol ethers.

}, keywords = {Catalytic, etherification, fuel additives, Hinselwood, Impregnation, kinetics, Langmuir}, issn = {2190-6815}, doi = {10.1007/s13399-023-04880-9}, author = {Magar, Subhash B. and Kapoor, Ashish and Jana, Sumit Kumar and Pal, Dan Bahadur and Rode, Chandrashekhar V.} }