@article { ISI:000258026000010, title = {Synthesis and characterizations of NiTiO(3) nanoparticles prepared by the sol-gel process}, journal = {Philosophical Magazine Letters}, volume = {88}, number = {6}, year = {2008}, month = {MAR}, pages = {467-472}, publisher = {TAYLOR \& FRANCIS LTD}, type = {Article}, address = {4 PARK SQUARE, MILTON PARK, ABINGDON OX14 4RN, OXON, ENGLAND}, abstract = {

Nanocrystalline nickel titanate (NiTiO(3)) composite powders were prepared by the sol-gel process combined with a surfactant-assisted template method. The resulting powders were calcined at different temperatures ranging from 150 degrees C to 750 degrees C for 2 h in air. The results revealed that a pure hexagonal phase of NiTiO(3) could be obtained at the low temperature of 750 degrees C. The phase evolution of NiTiO(3) was investigated by X-ray diffraction patterns, Fourier-transform infrared spectroscopy, and X-ray photoelectron spectroscopy. Particle size and morphology were studied by transmission electron microscopy.

}, keywords = {Nanoparticles, nickel titanate, sol-gel process}, issn = {0950-0839}, doi = {10.1080/09500830802199709}, author = {Gambhire, A. B. and Lande, Machhindra K. and Kalokhe, S. B. and Mandale, A. B. and Patil, K. R. and Gholap, Ramkrishna S. and Arbad, B. R.} } @article { ISI:000286904800076, title = {Degradation of methylene blue via photocatalysis of transition metal-loaded sulfated TiO2}, journal = {Materials Chemistry and Physics}, volume = {125}, number = {3}, year = {2011}, month = {FEB}, pages = {807-812}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Transition metal-loaded nanocrystalline SO42-/TiO2 powders were prepared by sol-gel method. Anatase is found as the active phase in all the samples. Sulfation process clearly stabilizes TiO2 catalyst phase against sintering, maintaining anatase phase and relatively high surface area values with respect to pure TiO2. Wide structural and surface characterization of samples was carried out in order to establish a correlation between the effect of sulfation and metal incorporation on the TiO2 photocatalytic properties. The maximum photocatalytic decomposition of methylene blue solution was achieved with sulfation of TiO2. In addition, incorporation of metal into the structure of SO42-/TiO2 seems to enhance the photocatalytic activity of the samples, which is ascribed to the enlargement of specific surface area, photogenerated carriers separation, light absorption, as well as the higher surface acidity. (C) 2010 Elsevier B.V. All rights reserved.

}, keywords = {nanomaterial, Photocatalytic activity, sol-gel process}, issn = {0254-0584}, doi = {10.1016/j.matchemphys.2010.09.053}, author = {Gambhire, A. B. and Lande, Machhindra K. and Arbad, B. R. and Rathod, S. B. and Gholap, Ramkrishna S. and Patil, K. R.} } @article { ISI:000311698800036, title = {One-pot sol-gel preparation for efficient cobalt-molybdenum-titania hydrotreating catalysts}, journal = {Chemcatchem}, volume = {4}, number = {12}, year = {2012}, month = {DEC}, pages = {2112-2120}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

Titania-based hydrodesulfurization catalysts were prepared by using a one-pot solgel method with the titanium peroxo complex as titanium precursor and molybdenum and cobalt precursors dissolved in the aqueous hydrogen peroxide solution used during synthesis. Catalysts with MoO3 loadings varying from 5 to 40 wt?\% and a Co/Mo atomic ratio of 0.5 were prepared. Solids with molybdenum loadings below 20 wt?\% MoO3 demonstrated poor hydrodesulfurization activity for the model compound thiophene. This was attributed to the presence of a large amount of embedded cobalt and molybdenum species in the titania matrix. A significant increase in the catalytic activity was observed for solids containing 20 and 25 wt?\% of MoO3 on which active species appeared to be accessible on the titania surface. Furthermore, the highest conversion obtained on these solgel solids was superior to the highest conversion obtained on reference catalysts prepared through the impregnation of ammonium heptamolybdate and cobalt nitrate on commercial titania.

}, keywords = {cobalt, heterogeneous catalysis, Molybdenum, sol-gel process, titanium}, issn = {1867-3880}, doi = {10.1002/cctc.201200165}, author = {Nguyen, D. L. and Gillot, S. and Souza, D. O. and Blanchard, P. and Lamonier, Carole and Berrier, E. and Kotbagi, T. V. and Dongare, Mohan K. and Shubhangi B. Umbarkar and Cristol, S. and Payen, E. and Lancelot, Christine} } @article {45646, title = {Synthesis and characterization of FeTiO3 ceramics}, journal = {Arabian Journal of Chemistry}, volume = {9}, year = {2016}, month = {SEP}, pages = {S429-S432}, type = {Article}, abstract = {

Nanocrystalline FeTiO3 ceramics powders were prepared by the sol-gel process combined with a surfactant-assisted template method. The resulting powders were calcined at different temperatures ranging from 150 degrees C to 600 degrees C for 2 h in an air. The results revealed that a pure hexagonal phase of FeTiO3 could be obtained at low temperature, 600 degrees C. The phase evolution of FeTiO3 was investigated by X-ray diffraction patterns (XRD), Fourier-transform infrared spectroscopy (FT-IR), and X-ray photoelectron spectroscopy (XPS). Particle size and morphology was studied by transmission electron microscopy (TEM). (C) 2011 Production and hosting by Elsevier B.V. on behalf of King Saud University.

}, keywords = {Electron microscopy, hexagonal phase, Nanoparticles, sol-gel process, Ti-O bond}, issn = {1878-5352}, doi = {10.1016/j.arabjc.2011.05.012}, author = {Gambhire, Anil B. and Lande, Machhindra K. and Rathod, Sandip B. and Arbad, Balasaheb R. and Vidhate, Kaluram N. and Gholap, Ramakrishna S. and Patil, Kashinath R.} } @article {43972, title = {Preparation of MgO supported platinum nanoparticle catalyst using toluene dispersed platinum sol}, journal = {Applied Surface Science}, volume = {418}, year = {2017}, month = {OCT}, pages = {874-91}, type = {Journal Article}, abstract = {

An effective way of anchoring Pt nanoparticles on MgO using toluene dispersed platinum nanoparticles (Pt-NPs) as one of the ingredient is demonstrated. The usage of particles dispersed in toluene allows the retention of size and size distribution of preformed Pt-NPs even after deposition on MgO support with high active surface area, which is crucial for heterogeneous catalysis. The catalyst thus prepared, displayed selective hydrogenation of cinnamaldehyde to cinnamyl alcohol with high turn on frequency (TOF - 105 h-1) with respect to the total Pt content. We attribute this efficient catalytic performance to the uniform distribution and deposition of Pt on the active MgO support and its better accessible surface as evidenced by the cyclic-voltammetry results.

}, keywords = {catalysis, Catalysts, cyclic voltammetry, Deposition, Magnesia, Nanoparticles, sol-gel process}, doi = {10.1016/j.apsusc.2016.12.058}, author = {Seth, J. and Nepak, D. and Chaudhari, V. R. and Prasad, B.L.V.} }