@article { ISI:000230338900005, title = {Low-temperature synthesis of nanocrystalline powders of lithium ferrite by an autocombustion method using citric acid and glycine}, journal = {Materials Letters}, volume = {59}, number = {21}, year = {2005}, month = {SEP}, pages = {2630-2633}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Nanocrystalline lithium ferrite is synthesized by an autocombustion method from the corresponding metal nitrates using citric acid as well as glycine as fuels. The ordered phase of lithium ferrite, in single phase form, with particle size of 32-36 nm and large coercivity, is obtained by this method at a low temperature of 200 degrees C. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {Combustion synthesis, LiFe5O8, lithium ferrite, low-temperature synthesis, Magnetic materials, Nanomaterials}, issn = {0167-577X}, doi = {10.1016/j.matlet.2005.04.005}, author = {Verma, S. and Karande, J. and Patidar, A. and Joy, Pattayil Alias} } @article { ISI:000246042800003, title = {Synthesis and magnetic properties of Mn doped ZnO nanowires}, journal = {Solid State Communications}, volume = {142}, number = {4}, year = {2007}, month = {APR}, pages = {190-194}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Mn doped ZnO nanowires have been synthesized using a simple autocombustion method. The as-synthesized Mn doped ZnO nanowires were characterized by X-ray diffraction and transmission electron microscopy. An increase in the hexagonal lattice parameters of ZnO is observed on increasing the Mn concentration. Optical absorption studies show an increment in the band gap with increasing Mn content, and also give evidence for the presence of Mn2+ ions in tetrahedral sites. All Zn1-xMnxO (0 \<= x \<= 0.25) samples are paramagnetic at room temperature. However, a large increase in the magnetization is observed below 50 K. This behavior, along with the negative value of the Weiss constant obtained from the linear fit to the susceptibility data below room temperature, indicate ferrimagnetic behavior. The origin of ferrimagnetism is likely to be either the intrinsic characteristics of the Mn doped samples, or due to some spinel-type impurity phases present in the samples that could not be detected. (c) 2007 Elsevier Ltd. All rights reserved.

}, keywords = {Combustion synthesis, diluted magnetic semiconductor, magnetic properties, Mn doped ZnO}, issn = {0038-1098}, doi = {10.1016/j.ssc.2007.02.017}, author = {Deka, Sasanka and Joy, Pattayil Alias} } @article { ISI:000255305200006, title = {Effect of fuel and its concentration on the nature of Mn in Mn/CeO2 solid solutions prepared by solution combustion synthesis}, journal = {Acta Materialia}, volume = {56}, number = {7}, year = {2008}, month = {APR}, pages = {1461-1472}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Nano and microcrystalline, Mn/CeO2 solid solutions (5 mol.\% Mn) have been prepared by solution combustion synthesis using urea, glycine or polyethylene glycol (PEG) as fuel. The nature of the fuel and its concentration (fuel to metal mole ratio, F/M have a strong influence on the physical and chemical characteristics of the resulting Mn/CeO2 solid solutions. The variations in the physicochemical properties are attributed to differences in (i) the adiabatic/real flame temperature realized with these fuels at different F/M ratios; (ii) the sustenance of the temperature or the quenching effect of the fuel at higher F/M ratios; (iii) combustion or decomposition of the precursors as the main course of the reaction; and (iv) the generation of gaseous products during combustion. Since the addition of the fuel to the initial precursor solution does not change the pH of the medium, the differences in the type of Mn species formed are mainly attributed to the combustion process. (C) 2007 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

}, keywords = {Combustion synthesis, Mn-ceria, Nanocomposites, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS)}, issn = {1359-6454}, doi = {10.1016/j.actamat.2007.11.035}, author = {Murugan, B. and Ramaswamy, A. V. and Srinivas, D. and Gopinath, Chinnakonda S. and Ramaswamy, Veda} } @article { ISI:000265933700042, title = {Origin of high room temperature ferromagnetic moment of nanocrystalline multiferroic BiFeO3}, journal = {Applied Physics Letters}, volume = {94}, number = {18}, year = {2009}, month = {MAY}, pages = {182507}, publisher = {AMER INST PHYSICS}, address = {CIRCULATION \& FULFILLMENT DIV, 2 HUNTINGTON QUADRANGLE, STE 1 N O 1, MELVILLE, NY 11747-4501 USA}, abstract = {

Single phase nanocrystalline BiFeO3 of average crystallite size similar to 25 nm with very high magnetization at room temperature is synthesized by an autocombustion method. Magnetic measurements above room temperature show deviation between field cooled and zero field cooled magnetization below 645 K, the Neel temperature (T-N) of the bulk material, indicating intrinsic nature of ferromagnetism. However, observation of a broad magnetic transition above T-N of BiFeO3 and extended up to 800 K suggests the presence of Fe3O4 as a possible magnetic impurity phase. Evidence for the presence of Fe3O4 is obtained from detailed analysis of the powder x-ray diffraction pattern.

}, keywords = {bismuth compounds, Combustion synthesis, crystallites, ferromagnetic materials, high-temperature effects, magnetic impurities, Magnetic moments, Magnetisation, Multiferroics, Nanostructured materials, Neel temperature, X-ray diffraction}, issn = {0003-6951}, doi = {10.1063/1.3132586}, author = {Vijayanand, S. and Potdar, H. S. and Joy, Pattayil Alias} } @article { ISI:000315013200017, title = {Disordered mesoporous V/TiO2 system for ambient oxidation of sulfides to sulfoxides}, journal = {Applied Catalysis A-General}, volume = {452}, year = {2013}, month = {FEB}, pages = {132-138}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

High sulfide conversion and predominant sulfoxide yield has been observed with 0.1\% vanadium doped disordered mesoporous Ti1-xVxO2 material at ambient and sub ambient temperatures using environmentally green H2O2 oxidant. Ti1-xVxO2 materials were prepared by one-pot solution combustion method in less than 15 min and thoroughly characterized by X-ray diffraction, HRTEM, Raman spectra and other physicochemical techniques. Different sulfides, such as, phenylsulfide, methyl-p-tolylsulfide, ethylsulfide, thioanisole, were converted into the corresponding sulfoxide. Isolated V5+ incorporated in the TiO2 lattice is likely to be the active species for the sulfide oxidation reaction. Catalyst recycling studies indicates the robustness of the catalyst. (c) 2012 Elsevier B.V. All rights reserved.

}, keywords = {Ambient oxidation, Combustion synthesis, heterogeneous catalysis, Hydrogen peroxide, Mesoporous TiO2, Sulfoxidation, Sulfoxide}, issn = {0926-860X}, doi = {10.1016/j.apcata.2012.11.035}, author = {Negi, Sanjay Singh and Sivaranjani, Kumarsrinivasan and Singh, Anand Pal and Gopinath, Chinnakonda S.} } @article {45537, title = {Improved efficiency of DSSC using combustion synthesized TiO2}, journal = {Materials Research Bulletin}, volume = {109}, year = {2019}, month = {JAN}, pages = {222-226}, type = {Article}, abstract = {

Combustion synthesis method is an economic, one step and an effective method for the synthesis of nanomaterials. In this work, titanium dioxide nanoparticles were synthesized by combustion method. The synthesized material was characterized by XRD, SEM and BET. Dye sensitized solar cell was fabricated using the synthesized material and its performance was compared with the solar cell fabricated using commercial TiO2. In order to evaluate the photovoltaic performance of DSSCs, photocurrent density to photovoltage (J-V) characteristic and electrochemical impedance spectroscopy (EIS) measurements were carried out. The DSSC fabricated using combustion synthesized and commercial TiO2 exhibited a power conversion efficiency of 6.11\% and 6.62\%, respectively. Combustion synthesized TiO2 which displayed similar efficiency to that of commercial material is least studied in the literature for solar cell applications.

}, keywords = {Combustion synthesis, Dye sensitized solar cell, TiO2}, issn = {0025-5408}, doi = {10.1016/j.materresbull.2018.09.044}, author = {Umale, Sanjivani and Sudhakar, V. and Sontakke, Sharad M. and Krishnamoorthy, K. and Pandit, Aniruddha B.} }