@article { ISI:000227513700006, title = {Modeling a continuous multistage liquid phase cyclohexane oxidation reactor network}, journal = {Chemical Engineering and Processing}, volume = {44}, number = {5}, year = {2005}, month = {MAY}, pages = {567-579}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

A model is presented for a continuous multistage liquid phase cyclohexane oxidation reactors-in-series network, which uses, unlike previous efforts, a closed form rate model derived on the basis of the well-known free-radical kinetic mechanism of the oxidation reaction leading to a more generalized representation of the oxygen dependence of the rate. The model calculates the required transport and hydrodynamic parameters by one of the best available set of correlations shown earlier to be successfully used in cyclohexane oxidation in a well-designed laboratory reactor. Process sensitivities with regard to variables such as air rate, residence time, head pressure, inlet air composition and sparger configuration have been predicted. Some of these trends compared very well with the limited published experimental data in a three (351) agitated and sparged tank-in-series reactor system, thus partially validating the model. The model has highlighted a fairly generalized way of correlating performance data from a given reactor, namely in terms of a yield-conversion characteristic which can change depending on the mass transfer efficiency and the effective kinetics. Hence, it can aid in plant monitoring and optimization. It has also been shown how to use the same as an aid in preliminary scale-up studies based on laboratory or pilot plant reactor performance data. (C) 2004 Elsevier B.V. All rights reserved.

}, keywords = {continuous multistage reactor, Cyclohexane, Liquid phase oxidation}, issn = {0255-2701}, doi = {10.1016/j.cep.2004.07.002}, author = {Bhattacharya, Arijit} } @article { ISI:000266263000034, title = {Liquid phase oxidation of p-cresol over cobalt saponite}, journal = {Topics in Catalysis}, volume = {52}, number = {6-7}, year = {2009}, month = {JUN}, pages = {784-788}, publisher = {SPRINGER/PLENUM PUBLISHERS}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

Liquid phase oxidation of p-cresol was carried out over a Co-saponite catalyst in a temperature and pressure range of 333-393 K and 20-827 kPa, respectively in n-propanol. Co-saponites with varying cobalt content (5-30\%) were prepared and screened among which 13\% Co-saponite gave the highest conversion of 92\% of p-cresol with 92\% selectivity to p-hydroxybenzaldehyde without formation of any non-oxidation products.

}, keywords = {Co-saponite, Liquid phase oxidation, p-Cresol, p-Hydroxybenzaldehyde, XPS}, issn = {1022-5528}, doi = {10.1007/s11244-009-9199-z}, author = {Kshirsagar, Vikas S. and Garade, Ajit C. and Patil, Kashinath R. and Shirai, Masayuki and Rode, Chandrashekhar V.} } @article { ISI:000316583700015, title = {Heterogeneous Co3O4 catalyst for selective oxidation of aqueous veratryl alcohol using molecular oxygen}, journal = {Catalysis Communications}, volume = {33}, year = {2013}, month = {MAR}, pages = {66-69}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Nano-structured, spinel Co3O4 catalyst was developed for the aqueous phase oxidation of veratryl alcohol, which showed the highest conversion of 85\% with 96\% selectivity to veratryl aldehyde. The co-existence of Co3+ and Co2+ species in the octahedral and tetrahedral positions respectively, was confirmed by XPS, cyclic voltammogram, TPR and TPO characterization. The rod-like morphology of Co3O4 catalyst was confirmed by HRTEM. The effects of various reaction parameters namely, catalyst concentration, temperature and partial oxygen pressure on conversion and selectivity patterns were also studied for the oxidation of veratryl alcohol. This catalyst also showed an excellent stability as evidenced by successful reusability for three times. (C) 2012 Published by Elsevier B.V.

}, keywords = {Co3O4, Cyclic voltammogram, Liquid phase oxidation, Molecular oxygen, Veratryl alcohol, XPS}, issn = {1566-7367}, doi = {10.1016/j.catcom.2012.12.015}, author = {Mate, Vivek R. and Shirai, Masayuki and Rode, Chandrashekhar V.} } @article {48076, title = {Green synthesis of cyclohexanone to adipic acid over Fe-W oxides incorporated mesoporous carbon support}, journal = {Catalysis Communications}, volume = {168}, year = {2022}, month = {AUG}, pages = {106466}, type = {Article}, abstract = {

We have prepared iron and tungsten oxides incorporated mesoporous carbon (MC) catalysts using a simple hydrothermal methodology with different carbon sources, and the catalytic performance was investigated for cyclohexanone oxidation. An adequate amount of metal oxide loading has displayed a key role in the selective catalyst for adipic acid (AA) synthesis. The MC catalyst has shown its prime activity under the influence of redox properties of W5+/W6+ and Fe2+/Fe3+ as promoters. The 10\%Fe 90\%W-MC fructose as a carbon source catalyst has provided its best selectivity of 87\% for AA at 120 ?C.

}, keywords = {Adipic Acid, Liquid phase oxidation, mesoporous carbon, Redox center}, issn = {1566-7367}, doi = {10.1016/j.catcom.2022.106466}, author = {Mekala, Siva Prasad and Prabu, Marimuthu and Gawali, Sheetal Datta and Gopakumar, Karthik and Gogoi, Pranjal and Bhatkar, Akash Ravindra and Mohapatra, Gourab and Unnikrishanan, Eeswar and Raja, Thirumalaiswamy} }