@article { ISI:000209665200041, title = {MoS2 nanoparticles and h-BN nanosheets from direct exfoliation of bulk powder: one-step synthesis method}, journal = {Materials Research Express}, volume = {1}, number = {3}, year = {2014}, month = {SEP}, pages = {035038}, publisher = {IOP PUBLISHING LTD}, address = {TEMPLE CIRCUS, TEMPLE WAY, BRISTOL BS1 6BE, ENGLAND}, abstract = {

We report facile synthesis of MoS2 nanoparticles and h-BN nanosheets using ultrasonication method in suitable solvents such as N-Methyl-2-pyrrolidone and ethylene glycol, respectively. The average size of MoS2 nanoparticles observed from TEM analysis were 4-5 nm and about a few hundreds of nm for h-BN nanosheets. Raman spectroscopy carried out on nanoparticle samples confirms the formation of MoS2 nanoparticles and h-BN nanosheets. UV-vis absorption and photoluminescence (PL) measurements carried out on the products show typical absorption and luminescence spectra of MoS2 and h-BN. Further, we attempted to decorate gold nanoparticles on nanosheets of MoS2 and h-BN which show subsequent change in Raman spectra due to charge transfer interaction.

}, keywords = {h-BN, MoS2, Nanoparticles, nanosheets, Optical properties}, issn = {2053-1591}, doi = {10.1088/2053-1591/1/3/035038}, author = {Thripuranthaka, M. and Rout, Chandra Sekhar and Late, Dattatray J.} } @article { ISI:000335660200006, title = {Studies on morphology of polyaniline films formed at liquid-liquid and solid-liquid interfaces at 25 and 5 A degrees C, respectively, and effect of doping}, journal = {Colloid and Polymer Science}, volume = {292}, number = {5}, year = {2014}, month = {MAY}, pages = {1079-1089}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

It is well accepted that the morphology of the nanomaterials has great effect on the properties and hence their applications. Therefore, morphology of materials has become a focus of research in the scientific world. The present study shows that interfacial polymerization and subsequent self-assembly provides a control over the morphology, nanorod/nanosheet, of polyaniline (PANI) films synthesized by liquid-liquid interface reaction technique and solid-liquid interface reaction technique. The synthesized PANI films and its particulate structure are characterized by using various spectroscopic techniques such as UV-visible, ATR-IR, Raman and XPS. The study confirmed the formation, the structure, the size and shape of particles and morphology of PANI by using analytical techniques namely, SAED, SEM and TEM. An important observation is that doping with HCl significantly improves the nanorod formation at the interface. The doped PANI electrode exhibits a higher area with rectangular shape in CV cycle and better cycle stability when compared with the performance of undoped PANI films. We believe that the results of these studies can give valuable leads to manoeuvre formation of PANI films with desired morphology for various applications.

}, keywords = {interfacial polymerization, Liquid-liquid interface, Nanorods, nanosheets, polyaniline, Self-assembly, Solid-liquid interface, Thin films}, issn = {0303-402X}, doi = {10.1007/s00396-013-3150-3}, author = {Waghmode, Babasaheb J. and Patil, Sagar H. and Jahagirdar, Mandar M. and Patil, Virendra S. and Waichal, Rupali P. and Malkhede, Dipalee D. and Sathaye, Shivaram D. and Patil, Kashinath R.} } @article { ISI:000370057200011, title = {Enhanced electron field emission from NiCo2O4 nanosheet arrays}, journal = {Materials Research Express}, volume = {2}, number = {9}, year = {2015}, month = {SEP}, pages = {095011}, publisher = {IOP PUBLISHING LTD}, address = {TEMPLE CIRCUS, TEMPLE WAY, BRISTOL BS1 6BE, ENGLAND}, abstract = {

Electron emission properties of electrodeposited spinel NiCo2O4 nanosheet arrays grown on Ni foam have been studied. The work function of NiCo2O4 was calculated by density functional theory using the plane-wave basis set and used to estimate the field enhancement factor. The NiCo2O4 nanosheet arrays exhibited a low turn-on field of 1.86 V mu m(-1) at 1 mu A cm(-2) and current density of 686 mu A cm(-2) at 3.2 V mu m(-1), with field enhancement factor beta = 1460 and good field emission current stability. The field emission properties of the NiCo2O4 nanosheet arrays showed enhanced performance compared to chemically prepared NiCo2O4 nanosheets. Hence, the nanosheet arrays have great potential as robust high performance vertical structure electron emitters for future flat panel displays and vacuum electronic device applications.

}, keywords = {Density functional theory, field emission, nanosheets, NiCo2O4, spinel}, issn = {2053-1591}, doi = {10.1088/2053-1591/2/9/095011}, author = {Naik, Kusha Kumar and Khare, Ruchita T. and Gelamo, Rogerio V. and More, Mahendra A. and Thapa, Ranjit and Late, Dattatray J. and Rout, Chandra Sekhar} } @article { ISI:000363270000040, title = {Hydrothermal synthesis of WS2/RGO sheet and their application in UV photodetector}, journal = {Journal of Alloys and Compounds}, volume = {653}, year = {2015}, month = {DEC}, pages = {298-303}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Two-dimensional (2D) semiconductor nanomaterials hold great promises for future electronics and optics. In this paper, we report UV photocurrent response of 2D hybrid materials consisting of layered WS2 nanosheets and reduced graphene oxide prepared by using one step hydrothermal method. Few-layer WS2 and WS2/RGO nanosheets are characterized by Raman spectroscopy and HRTEM. The electric and optoelectronic properties of WS2 and WS2/RGO based UV photodetector shows a fast response of 48s and 85s and high photosensitivity (80 mu AW(-1) and 3.21 mAW(-1)) indicating that the two-dimensional composite nanostructure WS2/RGO is an important material for high performance photodetectors. (C) 2015 Elsevier B.V. All rights reserved.

}, keywords = {nanosheets, UV photodetector, WS2, WS2/RGO}, issn = {0925-8388}, doi = {10.1016/j.jallcom.2015.08.255}, author = {Shelke, Nitin T. and Karche, B. R.} } @article { ISI:000373421700065, title = {Architecture of 2D MoS2 nanosheets and 3D CdMoS4 marigold flowers: consequence of annealing on field emission performance}, journal = {Microporous and Mesoporous Materials}, volume = {225}, year = {2016}, month = {MAY}, pages = {573-579}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Herein, we report the field electron emission investigations on template free solvothermally synthesized layered MoS2 nanosheets as well as novel phase of CdMoS4 nanoflowers at the base pressure of similar to 1 x 10(-8) mbar. The turn-on field, threshold field and maximum emission current densities for both MoS2 and CdMoS4 are strongly influenced by thermal annealing in inert atmosphere. The turn on field, required to draw emission current density of 1 mu A/cm(2) is found to be 5.8 and 3.2 V/mu m for pristine and annealed MoS2 at 400 degrees C. In case of as prepared and annealed CdMoS4 sample the turn on field values are found to be similar to 6.2 and 5.0 V/mu m, respectively. The emission current versus time (I-t) plot measured at the preset current values of similar to 1 mu A for pristine and annealed sample indicates stable operation of the emitter. The emission current fluctuations for annealed sample are observed to be less as compared with the pristine sample due to conditioning of the emitter, thereby showing highly stable nature of emitter. Thus, the present result demonstrates the potential of annealed MoS2 nanosheets and CdMoS4 nanoflowers as an emerging materials for micro/nanoelectronics and flat panel field emission display applications. (C) 2016 Elsevier Inc. All rights reserved.

}, keywords = {field emission, MoS2 and CdMoS4, Nanoflowers, nanosheets}, issn = {1387-1811}, doi = {10.1016/j.micromeso.2016.01.033}, author = {Kadam, Sunil R. and Suryawanshi, Sachin R. and Panmand, Rajendra P. and Mate, Vivek R. and More, Mahendra A. and Late, Dattatray J. and Kale, Bharat B.} } @article { ISI:000368563000102, title = {Hybrid perovskite quantum nanostructures synthesized by electrospray antisolvent-solvent extraction and intercalation}, journal = {ACS Applied Materials \& Interfaces}, volume = {8}, number = {1}, year = {2016}, month = {JAN}, pages = {854-861}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Perovskites based on organometal lead halides have attracted great deal of scientific attention recently in the context of solar cells and optoelectronic devices due to their unique and tunable electronic and optical properties. Herein, we show that the use of electrospray technique in conjunction with the antisolventsolvent extraction leads to novel low-dimensional quantum structures (especially 2-D nanosheets) of CH3NH3PbI3- and CH3NH3PbBr3-based layered perovskites with unusual luminescence properties. We also show that the optical bandgaps and emission characteristics of these colloidal nanomaterials can be tuned over a broad range of visible spectral region by compositional tailoring of mixed-halide (I- and Br-based) perovskites.

}, keywords = {2D nanostructure systems, antisolvent-solvent extraction, bandgap tuning, electrospray, nanosheets, perovskite, quantum dots}, issn = {1944-8244}, doi = {10.1021/acsami.5b10208}, author = {Naphade, Rounak and Nagane, Satyawan and Shanker, G. Shiva and Fernandes, Rohan and Kothari, Dushyant and Zhou, Yuanyuan and Padture, Nitin P. and Ogale, Satishchandra} } @article { ISI:000373421700057, title = {Liquid exfoliation of black phosphorus nanosheets and its application as humidity sensor}, journal = {Microporous and Mesoporous Materials}, volume = {225}, year = {2016}, month = {MAY}, pages = {494-503}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The bulk crystal of black phosphorus was exfoliated by liquid exfoliation method for a duration of 8 h using N-Methyl-2-Pyrrolidone as the solvent. The exfoliated sample was centrifuged at different rpm such as 3000, 5000 and 10,000 to separate out the 2D black phosphorus nanosheets with different thickness and length. The as synthesized black phosphorus nanosheets collected at these rpm values were characterized with TEM, AFM, Raman spectroscopy and Vis-NIR spectroscopy. Further, we investigated the humidity sensing behaviour of the devices fabricated by using these samples. The results obtained show that the device fabricated with black phosphorus nanosheets and nanoparticles obtained by filtration of the sample collected after 10,000 rpm exhibited better performance as compared to the nanosheets collected at 3000 and 5000 rpm. The response and recovery times of devices are found to be promising and better than those of the black phosphorus gas sensor reported earlier. The present investigations open up a new avenue for further studies in improving the performance of black phosphorus nanosheets based gas sensing devices. (C) 2016 Elsevier Inc. All rights reserved.

}, keywords = {black phosphorus, Humidity sensors, Liquid exfoliation, nanosheets}, issn = {1387-1811}, doi = {10.1016/j.micromeso.2016.01.031}, author = {Late, Dattatray J.} } @article { ISI:000373619000021, title = {Synthesis, microstructure, optical and field emission studies of iron vanadium oxide nanosheets}, journal = {Journal of Physics D-Applied Physics}, volume = {49}, number = {14}, year = {2016}, month = {APR}, pages = {145301}, publisher = {IOP PUBLISHING LTD}, address = {TEMPLE CIRCUS, TEMPLE WAY, BRISTOL BS1 6BE, ENGLAND}, abstract = {

We report a single step growth of thin graphene-like, densely packed FeV3O8 (FVO) nanosheets on silicon substrates via facile hydrothermal synthesis. These nanosheets have dimensions of a few microns with thin edges, offering very high aspect ratio. These FVO nanosheets exhibit excellent field emission behaviour with low turn on and threshold voltages of 1.3 V mu m(-1) and 1.7 V mu m(-1), respectively. The corresponding emitter delivers high emission current density of (similar to 1.650 mA cm(-2)) at fairly low applied field (similar to 4.00 V mu m(-1)).

}, keywords = {FeV3O8, field emission, nanosheets}, issn = {0022-3727}, doi = {10.1088/0022-3727/49/14/145301}, author = {Badadhe, Satish S. and Suryawanshi, Sachin R. and Naphade, Rounak A. and Chaudhary, Minakshi V. and More, Mahendra A. and Shelke, Manjusha V. and Ogale, Satishchandra B.} } @article {43980, title = {Enhanced field emission performance of NiMoO4 nanosheets by tuning the phase}, journal = {Applied Surface Science}, volume = {418}, year = {2017}, month = {OCT}, pages = {270-274}, type = {Journal Article}, abstract = {In this paper we report, large scale synthesis of α and β-NiMoO4 by a facile hydrothermal method and we observed that urea plays important role on the growth of β-NiMoO4 nanosheets. We have also carried out field emission (FE) investigations of α and β-NiMoO4 at a base pressure of \~{}1 {\texttimes} 10-8 mbar. The obtained turn-on field at emission current density of 1 μA/cm2 for β-NiMoO4 nanosheets and α -NiMoO4 is 1.3 V/μm and 2.2 V/μm respectively were observed. The maximum field emission current density of 1.006 mA/cm2at an applied electric field of 2.7 V/μm was achieved for β-NiMoO4 nanosheets. Furthermore, we found that the β-NiMoO4 nanosheets possess good field emission performance compared to α-NiMoO4. The results indicate that NiMoO4can be used as a promising material in FE applications with possibility of tuning field emission performance by controlling the phase.}, keywords = {Current stability, field emission, nanosheets, NiMoO4}, doi = { 10.1016/j.apsusc.2017.02.177}, author = {Bankar, P. K.}, editor = {Ratha, S.} } @article {46104, title = {Direct thermal polymerization approach to N-rich holey carbon nitride nanosheets and their promising photocatalytic H-2 evolution and charge-storage activities}, journal = {ACS Sustainable Chemistry \& Engineering}, volume = {7}, year = {2019}, month = {MAY }, pages = {9428-9438}, type = {Article}, abstract = {

Energy conversion and energy storage are two crucial challenges in green chemistry that have attracted tremendous attention for the last several decades. In this work, we have addressed both issues by synthesizing nitrogen-rich, few-layer-thick holey graphitic carbon nitride (g-C3N4) nanosheets by a simple, novel, direct thermal polymerization method, which is found to be very good in photocatalytic H-2 evolution reaction (energy-conversion) and charge-storage supercapacitor (energy-storage) applications. This as-synthesized conjugated polymer semiconductor (obtained stoichiometry C3N4.8) with unique structural and morphological advantages exhibits superior photocatalytic water splitting activity to H-2 evolution (2 620 mu mol h(-1) g(-1)) without the help of any cocatalysts under visible light in the presence of 20\% triethanolamine (TEOA). The calculated apparent quantum yield is 8.5\% at 427 nm, and the rate of photocatalytic hydrogen generation remained constant for nine consecutive catalytic cycles (9 h photocatalysis). The present material also shows electrochemical double layer capacitor (EDLC) behavior in alkaline electrolyte, where a symmetric coin cell device consisting of this electrode material without any large area support or conductive filler delivers high specific capacitance (275 F g(-1)), energy density (30 Wh kg(-1)), and power density (6651 W kg(-1)), and the supercapacitor cell can retain \>98\% capacitance efficiency up to 10 000 measured cycles at various current densities.

}, keywords = {g-C3N4, Hydrogen evolution, nanosheets, Photocatalyst, supercapacitor, water splitting}, issn = {2168-0485}, doi = {10.1021/acssuschemeng.9b00626}, author = {Antil, Bindu and Kumar, Lakshya and Reddy, K. P. and Gopinath, C. S. and Deka, Sasanka} } @article {46004, title = {Hydrothermal growth and humidity-dependent electrical properties of molybdenum disulphide nanosheets}, journal = {Journal of Nanoscience and Nanotechnology}, volume = {19}, year = {2019}, month = {AUG}, pages = {5158-5166}, type = {Article}, abstract = {

In present investigation, we report humidity dependent electrical properties of molybdenum disulphide (MoS2) nanosheets. MoS2 nanosheets were prepared through a facile hydrothermal method with different reaction temperatures. The as-synthesized MoS2 nanosheets were characterized with XRD, SEM, TEM, and Raman spectroscopy, which confirmed successful preparation and rationality. Further, the humidity dependent electrical properties against relative humidity (RH) of these samples were carried out at room temperature. The results evinced that the sensors film fabricated with MoS2 nanosheets prepared at temperature 220 degrees C exhibited better performance compared to the nanosheets synthesized at 180 degrees C and 200 degrees C temperature. The RH sensing results exhibits highly sensitive, ultrafast response/recovery behaviour and outstanding repeatability than reported earlier. The excellent humidity sensing properties of the resultant MoS2 nanosheets was proved to be an excellent candidate for constructing ultrahigh-performance humidity sensor toward various applications.

}, keywords = {Humidity sensors, Hydrothermal method, Molybdenum Disulphide, nanosheets}, issn = {1533-4880}, doi = {10.1166/jnn.2019.16828}, author = {Shelke, Nitin T. and Karle, S. C. and Karche, B. R.} } @article {46044, title = {Superior humidity sensor and photodetector of mesoporous ZnO nanosheets at room temperature}, journal = {Sensors and Actuators B-Chemical}, volume = {293}, year = {2019}, month = {AUG}, pages = {83-92}, type = {Article}, abstract = {

Miniaturized sensor technology is vastly demanding multifunctional materials to fulfill many requirements simultaneously; instead of integrating various sensors into a single device. Efficient operation of these miniaturized sensors at room temperature is highly feasible and cost-effective. The humidity sensing and photodetection is precise merit of sensing in special usage like artificial skin. Sensitivity enhancement in both humidity and photodetection required the high surface area for adsorption as well as a high charge transfer mechanism. The two dimensional (2D) zinc oxide nanosheets (ZnO NS) is the ultimate structure for dimensionally confined transport properties owing to the specific surface atomic configuration that results in high sensitivity, low operating temperature, fast response and recovery, and improved selectivity. Furthermore, introducing porosity into 2D nanostructures has opened new opportunities to enhance the efficiency of sensors and detectors via increasing large surface area and tunable physical and chemical properties. Here we report preparation of mesoporous and highly crystalline 2D ZnO NS by a single step, template free, cost-effective chemical method. The structural and morphological characterizations of ZnO NS are carried out using XRD, FESEM, XPS, TEM respectively. The high-resolution TEM images emphasize sheet-like morphology with a thickness of around 18-22 nm. Further the mesoporous ZnO NS (MZNS) with the pore size between 5-10 nm are achieved by simple heat-treatment. XPS and PL study is confirming the oxygen deficiency in MZNS. The MZNS exhibits an excellent responsivity than PZNS with a fast response and rapid recovery time of 25 s and 5 s respectively along with good cyclic stability which is highly crucial for smart humidity sensor. Furthermore, it considerably enhances photo-sensor performance than pristine ZnO NS (PZNS) with (similar to)1 s response time as well as (similar to)1 s recovery time along with better stability. These promising results illustrate the great potential of MZNS for next-generation humidity sensors and photodetectors.

}, keywords = {humidity sensor, Mesoporous, nanosheets, Photo-detector}, issn = {0925-4005}, doi = {10.1016/j.snb.2019.04.086}, author = {Gupta, Shobhnath P. and Pawbake, Amit S. and Sathe, Bhaskar R. and Late, Dattatray J. and Walke, Pravin S.} } @article {46198, title = {Temperature-dependent Raman spectroscopy and sensor applications of PtSe2 nanosheets synthesized by wet chemistry}, journal = {Beilstein Journal of Nanotechnology}, volume = {10}, year = {2019}, month = {FEB }, pages = {467-474}, type = {Article}, abstract = {

We report on a wet chemistry method used to grow PtSe2 nanosheets followed by thermal annealing. The SEM and TEM analysis confirms the formation of PtSe2 nanosheets. Furthermore, XRD, Raman, XPS and SAED patterns were used to analyze the crystal structure and to confirm the formation of the PtSe2 phase. The temperature-dependent Raman spectroscopy investigations were carried out on PtSe2 nanosheets deposited on Si substrates in the temperature range 100-506 K. The shifts in Raman active E-g and A(1g) modes as a function of temperature were monitored. The temperature coefficient for both modes was calculated and was found to match well with the reported 2D transition metal dichalcogenides. A PtSe2 nanosheet-based sensor device was tested for its applicability as a humidity sensor and photodetector. The humidity sensor based on PtSe2 nanosheets showed an excellent recovery time of approximate to 5 s, indicating the great potential of PtSe2 for future sensor devices.

}, keywords = {nanosheets, PtSe2, Raman spectroscopy, Sensor, thermal effect}, issn = {2190-4286}, doi = {10.3762/bjnano.10.46}, author = {Pawar, Mahendra S. and Late, Dattatray J.} } @article {48342, title = {Titanium trisulfide nanosheets and nanoribbons for field emission- based nanodevices}, journal = {ACS Applied Nano Materials}, volume = {6}, year = {2023}, month = {JAN}, pages = {44-49}, type = {Article}, abstract = {

The field emission (FE) properties of TiS3 nanosheets and nanoribbons, synthesized by direct sulfuration of bulk titanium, are investigated. The nanosheets show an enhanced FE behavior with a low turn-on field of similar to 0.3 V/ mu m, required for drawing an emission current density of similar to 10 mu A/cm2. Interestingly, the TiS3 nanosheet emitter delivered a large emission current density of similar to 0.9 mA/ cm2 at a relatively low applied electric field of similar to 0.4 V/mu m. We have estimated the values of the field enhancement factor (beta), which are found to be similar to 5 x 104 for the TiS3 nanosheet emitter and similar to 4 x 103 for the nanoribbon emitter. We attribute the superior FE performance to the presence of atomically sharp edges and the reduced thickness of TiS3, as reflected in the high value of beta. In fact, the nanosheet sample presents a higher density of ultrathin layers (similar to 12 nm-thick), and thus, they have a larger edge to volume ratio than the nanoribbon samples (which are similar to 19 nm-thick). The superior FE behavior of TiS3 nanosheets over nanoribbons makes them a propitious field emitter and can be utilized for various FE-based applications, demanding large emission currents and lower operational voltages. Moreover, the FE current stability recorded on these samples confirms their promising performance. Thus, the present investigation brings out a great promise of TiS3 nanosheets and nanoribbons as field emitters for vacuum nanoelectronics devices.

}, keywords = {Current stability, field emission, nanoribbon, nanosheets, TiS3}, doi = {10.1021/acsanm.2c03460}, author = {Pawbake, Amit S. and Khare, Ruchita T. and Island, Joshua O. and Flores, Eduardo and Ares, Jose R. and Sanchez, Carlos and Ferrer, Isabel J. and Pawar, Mahendra and Frank, Otakar and More, Mahendra A. and van der Zant, Herre S. J. and Castellanos-Gomez, Andres and Late, Dattatray J.} }