@article { ISI:000342501300021, title = {Microfluidic platform for continuous flow synthesis of triangular gold nanoplates}, journal = {Colloids and Surfaces A-Physicochemical and Engineering Aspects}, volume = {443}, year = {2014}, month = {FEB}, pages = {149-155}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

A microfluidic platform for the continuous flow synthesis of triangular gold nanoplates with and without surfactants is developed. The temperature profile in the microchannel, residence time and composition have been studied to understand effect of these parameters on the yield of the triangular nanoplates and were optimized for obtaining maximum yield of triangles. The flow synthesis approach has been demonstrated where the Br- ions can be supplied to the reaction mixture either from the surfactant viz. Cetyl trimethylammonium bromide (CTAB) or even from HBr. Apart from the Br- ions, the temperature gradient at the inlet of the continuous flow reactor is one of the key parameter that affects the yield of the triangular nanoplates. Finally we establish that with a right combination of the controlling parameters abetter yield of the Au nanotriangles by flow methods can be achieved even in the absence of surfactant. (C) 2013 Elsevier B.V. All rights reserved.

}, keywords = {Au nanotriangles, Flow synthesis, microreactor, Nucleation kinetics, Surfactants}, issn = {0927-7757}, doi = {10.1016/j.colsurfa.2013.10.047}, author = {Kumar, D. V. Ravi and Kulkarni, A. A. and Bhagavatula L. V. Prasad} } @article {44630, title = {Continuous flow synthesis of micron size silica nanoparticles: parametric study and effect of dosing strategy}, journal = {Journal of Flow Chemistry}, volume = {8}, year = {2018}, month = {JUN}, pages = {59-67}, abstract = {

This work for the first time reports continuous flow synthesis of silica nano-particles of size over 1 mu m using a simple tubular reactor. The systematic approach involves the study of effect of various parameters like: ammonia concentration, water concentration, electrolyte concentraton, temperature, solvent, residence time and mode of TEOS injection over a wide range. A combination of ethanol and butanol was used as the medium with relatively lower polarity. Various process parameters were optimized to obtain highly monodispersed particles of size up to 600 nm and high yield (up to 90\%). Attempts of reducing the reaction time by increasing temperature or concentrations of any of the reagents resulted in significant polydispersity and even in the formation of random shape agglomerates. At the optimized conditions almost complete conversion of TEOS happenned within 40 min and further growth of particles was achieved by adding TEOS using multipoint injection approach. While multipoint dosing resulted in the formation of very small number of secondary particles, the larger particles continued to grow beyond 800 nm. Further reduction in the polarity of reaction medium was achieved by adding 20\% v/v of toluene, which without changing homogeneity of the solution resulted in particles as large as 0.9-1.1 mu m.

}, keywords = {Flow synthesis, Multipoint injection, silica, TEOS, Tubular reactor}, issn = {2062-249X}, doi = {10.1007/s41981-018-0008-3}, author = {Jundale, Rajashri and Bari, Atul and Thara, Chinnu and Kulkarni, Amol} } @article {45529, title = {Scalable microwave-assisted continuous flow synthesis of CuO nanoparticles and their thermal conductivity applications as nanofluids}, journal = {Advanced Powder Technology}, volume = {30}, year = {2019}, month = {JAN}, pages = {13-17}, type = {Article}, abstract = {

We have demonstrated the novel and scalable synthesis of CuO nanoparticles by an integration of microwave and flow synthesis. The shape and size of CuO nanoparticles were tuned by changing the concentration of copper precursor. The production rate of CuO nanoparticles was found to be 5 g/h with 70\% conversion of copper acetate into the CuO nanoparticles. The thermal conductivity of CuO nanofluid prepared in ethylene glycol showed linear enhancement with increase in the volume content of CuO nanoparticles produced in batch and flow reactors. (C) 2018 The Society of Powder Technology Japan. Published by Elsevier B.V. and The Society of Powder Technology Japan. All rights reserved.

}, keywords = {Flow synthesis, Microwave, Nanofluids, Nanoparticles, scale-up, Thermal conductivity}, issn = {0921-8831}, doi = {10.1016/j.apt.2018.10.001}, author = {Nikam, Arun V. and Dadwal, Arun H.} } @article {46803, title = {New TBAF complex, highly stable, facile and selective source for nucleophilic fluorination: applications in batch and flow chemistry}, journal = {Asian Journal of Organic Chemistry}, volume = {9}, year = {2020}, month = {JUL}, pages = {1022-1026}, type = {Article}, abstract = {

Natural polysaccharides supported tetrabutylammonium fluoride (TBAF) complexes are prepared and found to be highly stable and selective fluoride source for well-renowned nucleophilic (SN2 type) fluorination reactions for the first time. Bacterial cellulose, plant cellulose, pectin, and starch derived TBAF complexes are synthesized, characterized (using SEM, TEM, and NMR techniques) and studied for their stability and reactivity. Heterogeneous bacterial cellulose-TBAF complex (NBu4(Bac-cell-OH)F) 1 was found to be highly stable and non-hygroscopic among all complexes, which gave high yields of fluorinated products in multi-gram scale in shorter reaction time. The primarily developed batch protocol was extended to solid-solid continuous flow reaction using an in-house built screw reactor, which furnished products in a few seconds of residence time (tR=20-25 sec) and excellent yields.

}, keywords = {Flow synthesis, fluorination, green chemistry, Sustainable Chemistry}, issn = {2193-5807}, doi = {10.1002/ajoc.202000235}, author = {Said, Madhukar S. and Khonde, Nilesh S. and Thorat, Meghana N. and Atapalkar, Ranjit S. and Kulkarni, Amol A. and Gajbhiye, Jayant and Dastager, Syed G.} }