@article { ISI:000276938100029, title = {On the magnetic and dielectric properties of nickel-neoprene nanoconaposites}, journal = {Materials Chemistry and Physics}, volume = {121}, number = {1-2}, year = {2010}, month = {MAY}, pages = {154-160}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Nickel nanocomposites were prepared by incorporating nickel nanoparticles in a neoprene matrix according to a specific recipe for various loadings of nickel particles. The dielectric properties of these composites were evaluated for different frequencies ranging from 100 kHz to 8 MHz at different temperatures from 30 degrees C to 120 degrees C. The dielectric permittivity increases with increase of nickel concentration. Increase in temperature enhances the permittivity initially, till 40 degrees C and thereafter the permittivity decreases. The dielectric loss exhibits relaxation peaks and the peaks shift to lower frequencies with increase in volume fraction of the nickel nanoparticles in the matrix. The evaluation of magnetic and dielectric properties of these composites suggests that the dielectric permittivity can be tailored by an appropriate loading of the filler using semi-empirical equations and the magnetic properties vary according to simple mixture equations. (C) 2010 Elsevier B.V. All rights reserved.

}, keywords = {Composite materials, dielectric properties, Elastomers, magnetic properties}, issn = {0254-0584}, doi = {10.1016/j.matchemphys.2010.01.006}, author = {Jamal, E. Muhammad Abdul and Joy, Pattayil Alias and Kurian, Philip and Anantharaman, Maliemadom R.} } @article { ISI:000340975900071, title = {Poly (3,4-ethylenedioxythiophene) (PEDOT) and poly (3,4-ethylenedioxythiophene)-few walled carbon nanotube (PEDOT-FWCNT) nanocomposite based thin films for Schottky diode application}, journal = {Materials Chemistry and Physics}, volume = {147}, number = {3}, year = {2014}, month = {OCT}, pages = {867-877}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Transparent, conductive films of poly (3,4-ethylenedioxythiophene) (PEDOT) and poly (3,4-ethylenedioxythiophene)-few walled carbon nanotube (PEDOT-FWCNT) nanocomposite were synthesized by in-situ oxidative polymerization and investigated for their Schottky diode property. The prepared films were characterized by UV-Vis spectroscopy, thermal gravimetric analysis (TGA), surface resistivity, cyclic voltametery, scanning electron microscopy (SEM) and high resolution transmission electron microscopy (HRTEM). SEM reveals the formation of homogeneous and adhesive polymer films while HRTEM confirms the uniform wrapping of polymer chains around the nanotube walls for PEDOT-FWCNT film. Improved thermal stability, conductivity and charge storage property of PEDOT in the presence of FWCNT is observed. Among different compositions, 5 wt. \% of FWCNT is found to be optimum with sheet resistance and transmittance of 500 Omega sq(-1) and 77\%, respectively. Moreover, the electronic and junction properties of polymer films were studied and compared by fabricating sandwich type devices with a configuration of Al/PEDOT or PEDOT-FWCNT nanocomposite/indium tin oxide (ITO) coated glass. The measured current density-voltage characteristics show typical rectifying behavior for both configurations. However, enhanced rectification ratio and higher forward current density is observed in case of PEDOT-FWCNT based Schottky diode. Furthermore, reliability test depicts smaller hysteresis effect and better performance of PEDOT-FWCNT based diodes. (C) 2014 Elsevier B.V. All rights reserved.

}, keywords = {Composite materials, Electrical properties, Polymer, Thin films}, issn = {0254-0584}, doi = {10.1016/j.matchemphys.2014.06.032}, author = {Gupta, Bhavana and Mehta, Minisha and Melvin, Ambrose A. and Kamalakannan, R. and Dash, Sitaram and Kamruddin, M. and Tyagi, A. K.} } @article {45723, title = {Single cell fabrication towards the realistic evaluation of a CNT-strung ZIF-derived electrocatalyst as a cathode material in alkaline fuel cells and metal-air batteries}, journal = {ChemElectroChem}, volume = {4}, year = {2017}, month = {NOV}, pages = {2928-2933}, type = {Article}, abstract = {

The development of an electrocatalyst possessing all the vital requisites of an ideal electrode material, such as high porosity, high conductivity, and high intrinsic electrochemical activity, holds a decisive key in determining the activity of the triplephase boundary in many energy devices like fuel cells and metal-air battery systems. In the present work, highly porous cobalt-based ZIFs are strung along the highly conducive CNT backbone by using a simple one-pot technique at room temperature, which is then utilized to derive a porous, corrosion-resistant, Co nanoparticle-embedded electrocatalyst. Herein, for the first time, the single cell performance of the Co-ZIF-67-derived electrocatalyst has been evaluated by fabricating membrane electrode assemblies of alkaline exchange membrane fuel cell (AEMFC) and zinc-air battery (ZAB) systems. A maximum power density of 296 mW/cm(2) (vs. 317 mW/cm(2) for 40 wt.\% Pt/C) and 60 mW/cm(2) (vs. 64 mW/cm(2) for 40 wt.\% Pt/C) in the single cells of ZAB and AEMFC systems, respectively, establishes the practical proficiency of the homemade electrocatalyst for cathode applications during realistic system-level validations.

}, keywords = {Batteries, Carbon nanotubes, Composite materials, fuel cells, metal-organic frameworks}, issn = {2196-0216}, doi = {10.1002/celc.201700562}, author = {Aiyappa, Harshitha Barike and Bhange, Siddheshwar N. and Sivasankaran, Vijitha P. and Kurungot, Sreekumar} } @article {45491, title = {Large enhancement in the magnetostriction parameters of the composite of CoFe2O4 and CoFe1.9Ga0.1O4}, journal = {Materials Letters}, volume = {236}, year = {2019}, month = {FEB }, pages = {303-306}, type = {Article}, abstract = {

A new strategy to enhance the magnetostriction parameters of cobalt ferrite (CoFe2O4) is illustrated. A composite comprising of nanocrystalline CoFe2O4 and bulk CoFe(1.9)Ga(0.1)O(4 )powders were mixed together then compacted and sintered at 1450 degrees C for 10 min. For a composite of 70 wt\% CoFe2O4 and 30 wt\% of CoFe(1.9)Ga(0.1)O4, maximum magnetostriction coefficient (lambda(max)) of -350 ppm has been obtained at lower magnetic field which is nearly 20\% and 65\% higher than that obtained for CoFe2O4 and CoFe1.9Ga0.1O4, respectively. Moreover, the composite exhibited higher strain sensitivity [d lambda/dH](max )of -2.6 x 10 (9) A(-1) m against the individual components of the composite. (C) 2018 Published by Elsevier B.V.

}, keywords = {Ceramics, Composite materials, Magnetic materials}, issn = {0167-577X}, doi = {10.1016/j.matlet.2018.10.115}, author = {Anantharamaiah, P. N. and Joy, P. A.} }