@article {49780, title = {Binder-free in situ interface reconstruction of NiMoO4 nanorods over Ni(OH)2 nanosheets for efficient urea oxidation}, journal = {Advanced Sustainable Systems}, volume = {9}, year = {2025}, month = {DEC}, type = {Article}, abstract = {

Replacing the energy-intensive oxygen evolution reaction (OER) with the urea oxidation reaction (UOR) in electrochemical water splitting offers simultaneous green hydrogen production and urea-rich wastewater oxidation, enhancing energy efficiency and economic viability. In this study, a non-noble metal-based binder-free NiMoO4/Ni(OH)2/NF electrocatalyst is developed, featuring NiMoO4 nanorods anchored on Ni(OH)2 nanosheets. This unique morphology facilitates a highly active in situ reconstructed interface, delivering a current density of 134 mA cm-2 at 1.40 V (vs RHE) in 1 m KOH with 0.33 m urea, significantly outperforming its individual components. The catalyst demonstrates excellent stability over 50 h at 30 mA cm-2. When integrated into an anion exchange membrane urea electrolyser (13 cm2 area) with Pt@C/NF as the HER cathode, the system achieves 192 mA cm-2 at 1.60 V. The post-UOR studies confirm the presence of an amorphous NiMoO4-crystalline Ni(OH)2 interface, which plays a key role in enhancing the availability of the active sites to enhance the UOR performance. The improved electrochemical performance of the engineered catalyst can be ascribed to the in situ reconstructed amorphous-crystalline interface, optimal hydrophilicity, reduced charge transfer resistance, and the distinct morphology. This strategy offers a promising pathway for developing highly active electrocatalysts for energy conversion applications.

}, keywords = {AEM, electrolyser, OWS, tomography, UOR, wastewater}, issn = {2366-7486}, doi = {10.1002/adsu.202500883}, author = {Kumar, Yogesh and Barik, Sidharth and Kharabe, Geeta Pandurang and Torris, Arun and Singh, Mayank U. and Mohan, S. and Galave, Chaitanya and Tekawadia, Jyoti and Kanawade, Rajesh and Kurungot, Sreekumar} } @article {49882, title = {Optimisation of metallic bismuth nanoparticle supported Pt-Bi(x\%)/C hybrid electrocatalyst for cost effective and efficient hydrogen production in alkaline media}, journal = {International Journal of Hydrogen Energy}, volume = {161}, year = {2025}, month = {AUG}, pages = {150699}, type = {Article}, abstract = {

The present study employed a simple mechanochemical method followed by 24-h ultrasonication to synthesize oxide-free metallic bismuth (Bi) nanoparticles. This was further used to synthesize a Pt-Bi(x\%)/C (NC-x) hybrid electrocatalyst for the hydrogen evolution reaction in alkaline media. X-ray photoelectron spectroscopy and contact angle measurements reveal, Bi modifies the electronic structure and surface morphology of the Pt/C electrocatalyst, thus enhancing reaction kinetics and active site availability. The relative three-electrode study reveals that optimised NC-20 electrocatalyst reduces the overpotentials by 10.44 \% and enhances the current density by 53 \% compared to commercial Pt/C. The practical applicability of the NC-20 electrocatalyst was studied with the 13 cm2 single cell anion exchange membrane electrolyser. The catalyst demonstrates promising performance where the current density of NC-20//IrO2 relatively increases by 22.6 \% compared to standard Pt/ C//IrO2, and shows continuous production and stable performance when monitored for 30 h.

}, keywords = {AEM, Bismuth nanoparticles, electrocatalyst, Full cell electrolysis, hydrogen evolution reaction, water electrolysis}, issn = {0360-3199}, doi = {10.1016/j.ijhydene.2025.150699}, author = {Dokhe, Revati and Ugale, Atul and Dube, Onkar and Varpe, Vaibhav and Galave, Chaitanya and Hattale, Gangadhar and Kadam, Rutuja and Virole, Vishal and Kumar, Ajay and Husale, Sudhir and Natu, Varun and Shevate, Rahul and Kanawade, Rajesh} } @article {49531, title = {Self-supported super-hydrophilic interconnected nanospikes and particles of MoS2-Ni3S2/NF with optimum d-band center for anion exchange membrane water electrolyzer}, journal = {Advanced Sustainable Systems}, volume = {9}, year = {2025}, month = {MAR}, type = {Article}, abstract = {

There is an imperative need for highly efficient electrocatalysts for cost-effective hydrogen production. Herein, a self-supported, hybrid composite as a bifunctional electrocatalyst is introduced. This is achieved by in situ growth of MoS2-Ni3S2 on nickel foam (NF), designated as MoS2-Ni3S2/NF, synthesized by a facile one-step hydrothermal synthesis method. MoS2-Ni3S2/NF exhibits low overpotentials of only 187 and 146 mV for OER and HER, respectively, to achieve a current density of 10 mA cm-2 in 1 M KOH. The practical application of the designed bifunctional electrocatalyst is verified by constructing the MoS2-Ni3S2/NF || MoS2-Ni3S2/NF symmetrical membrane electrode assembly (MEA) of 4 cm2 working area for the anion exchange membrane water electrolyzer. The system shows continuous electrolysis for the monitored 48 h duration. For OER, an optimum d-band center of -1.66 eV for the heterostructure is calculated from the Density Functional Theory (DFT) studies. The factors like the unique structure of the electrocatalyst, enhanced hydrophilicity, improved electrochemically accessible number of sites (ECASs), and optimum d-band center, are expected to be the primary contributors to the system{\textquoteright}s improved performance. Thus, the present finding unveils a straightforward synthesis approach for creating a stable electrocatalyst for advancing commercial water electrolysis in the realm of renewable electrochemical energy conversion.

}, keywords = {AEM, d-band center, electrolyzer, HER, OER}, issn = {2366-7486}, doi = {10.1002/adsu.202400957}, author = {Kumar, Yogesh and Barik, Sidharth and Samudre, Nikhil S. and Kharabe, Geeta Pandurang and Chauhan, Inderjeet and Manna, Narugopal and Bhat, Suresh and Kurungot, Sreekumar} }