@article { ISI:000233432200006, title = {Carbonylation of alkynes, alkenes and alcohols using metal complex catalysts}, journal = {Catalysis Surveys from Asia}, volume = {9}, number = {3}, year = {2005}, month = {SEP}, pages = {193-205}, publisher = {SPRINGER/PLENUM PUBLISHERS}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

Carbonylation of olefins, alcohols and halides using homogeneous as well as heterogeneous catalysts has been discussed. Highlights of contributions on the activity, selectivity and stability of catalysts for carbonylation reactions are discussed. Kinetics and mechanism including characterization of the intermediate catalytic species has also been reviewed. The performance of anchored Pd complexes on mesoporous supports (MCM-41 and MCM-48), water soluble Pd complexes and supported Pd catalysts in carbonylation of aryl alcohols and olefins has been discussed in the context of catalyst-product separation. Some aspects of kinetic modelling and reaction engineering of these multiphase catalytic reactions have also been reviewed.

}, keywords = {Carbonylation, catalysis, Heterogenization, homogeneous, Palladium}, issn = {1571-1013}, doi = {10.1007/s10563-005-7556-x}, author = {Sarkar, B. R. and Chaudhari, Raghunath V.} } @article { ISI:000250234900007, title = {Fabrication of an effusive molecular beam instrument for surface reaction kinetics - CO oxidation and NO reduction on Pd(111) surfaces}, journal = {Catalysis Letters}, volume = {119}, number = {1-2}, year = {2007}, month = {NOV}, pages = {50-58}, publisher = {SPRINGER}, type = {Article}, address = {233 SPRING STREET, NEW YORK, NY 10013 USA}, abstract = {

A simple molecular beam instrument (MBI) was fabricated for measuring the fundamental parameters in catalysis such as, sticking coefficient, transient and steady state kinetics and reaction mechanism of gas/vapor phase reactions on metal surfaces. Important aspects of MBI fabrication are given in detail. Nitric oxide (NO) decomposition and NO reduction with carbon monoxide (CO) on Pd(111) surfaces were studied. Interesting results were observed for the above reactions and they support the efficiency of the MBI to derive the fundamental parameters of adsorption and catalysis. Sustenance of CO oxidation at 400 K is dependent mostly on the absence of CO-poisoning; apparently, CO + O recombination is the rate determining step \<= 400 K. NO adsorption measurements on Pd(111) surface clearly indicating a typical precursor kinetics. Displacement of the chemisorbed CO by NO on Pd(111) surfaces was observed directly with NO + CO beams in the transient kinetics. It is also relatively easy to identify the rate-determining step directly from the MBI data and the same was demonstrated for the above reactions.

}, keywords = {carbon monoxide, catalysis, kinetics, molecular beam, nitric oxide, Pd(111)}, issn = {1011-372X}, doi = {10.1007/s10562-007-9184-8}, author = {Thirunavukkarasu, Kandasamy and Gopinath, Chinnakonda S.} } @article { ISI:000252529400025, title = {Incorporation of zirconium in medium-pore aluminophosphate molecular sieves with AEL framework}, journal = {Microporous and Mesoporous Materials}, volume = {108}, number = {1-3}, year = {2008}, month = {FEB}, pages = {223-229}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Zirconium incorporated alurninophosphate molecular sieves ZrAPO-11 was synthesized by hydrothermal method. The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy, thermogravimetric/differential thermal analysis (TGA/DTA), diffuse reflectance UV-visible spectroscopy, magic-angle spinning nuclear magnetic resonance (MAS NMR) spectroscopy (P-31 and Al-27). The acidity of the materials were determined by temperature programmed desorption (TPD) of ammonia. X-ray diffraction and scanning electron microscopy reveals formation of crystalline material in pure phase. Thermal analysis shows higher template content in zirconium containing samples than the corresponding AlPOs. MAS NMR suggests incorporation of zirconium in the framework. TPD reveals that the ZrAPO-11 samples were of higher acidity than AIPO(4)-11 (c) 2007 Elsevier Inc. All rights reserved.

}, keywords = {AlPO4-11, Aluminophosphate, catalysis, Molecular sieve, ZrAPO-11}, issn = {1387-1811}, doi = {10.1016/j.micromeso.2007.03.044}, author = {Ganguli, J. N. and Chakrabortty, Dhruba and Satyanarayana, C. V. V.} } @article { ISI:000264061100021, title = {Cobalt(II) chloride hexahydrate-diisopropylamine catalyzed mild and chemoselective reduction of carboxylic esters with sodium borohydride}, journal = {Synthesis-Stuttgart}, number = {4}, year = {2009}, month = {FEB}, pages = {660-664}, publisher = {GEORG THIEME VERLAG KG}, address = {RUDIGERSTR 14, D-70469 STUTTGART, GERMANY}, abstract = {

The cobalt-catalyzed reduction of unsaturated alpha-cyano carboxylic esters using sodium borohydride (NaBH(4)) leads to the corresponding saturated cyano alcohols in high yields. In particular, the new catalytic system cobalt(II) chloride-diisopropylamine in combination with NaBH(4) showed excellent activity in the chemoselective reduction of a variety of carboxylic esters to their corresponding alcohols in good to excellent yields under mild conditions.

}, keywords = {Alcohols, amines, catalysis, Esters, reductions}, issn = {0039-7881}, doi = {10.1055/s-0028-1083353}, author = {Jagdale, Arun R. and Paraskar, Abhimanyu S. and Sudalai, Arumugam} } @article { ISI:000271252400004, title = {Incorporation of tin in different types of pores in SBA-15: synthesis, characterization and catalytic activity}, journal = {Microporous and Mesoporous Materials}, volume = {126}, number = {3}, year = {2009}, month = {DEC}, pages = {234-244}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Mesoporous Sn-SBA-15 has been synthesized by three different methods Such as conventional hydrothermal route, using cocatalyst NH4F and in the presence of organosilane precursor. All the materials are thoroughly characterized by powder X-ray diffraction (XRD), SEM. TEM. N-2 sorption and surface area measurements, diffuse-reflectance UV-visible and FTIR spectroscopy. TG-DTA and elemental analysis through ICP. Nitrogen adsorption data, XRD patterns, and TEM observations Suggests that the textural properties are retained during the isomorphous substitution of silicon by tin. ICP chemical analysis indicates that tin can be substituted in the range of S-l/S-n = 69-162. UV-visible spectra of samples synthesized by the cocatalytic approach exhibit unique absorption band at 213 nm characteristics of tin atom substituted in the smaller pores (2-3 nm) located inside the walls of mesopores. Further, an additional band at 224 nm can be assigned to Sri atoms located in the distorted tetrahedral position along the primary mesopores. In contrary, only one absorption band centered at 224 nm is observed for all the samples synthesized by conventional hydrothermal as well as in the presence of organosilane precursor. F-19 NMR spectra confirmed (no signal) the absence of occluded F- ions in the samples made with NH4F. Observed high catalytic activity in Baeyer-Villiger oxidation and Meerwin-Pondorf-Verly reduction under the liquid-phase conditions suggest the incorporation of a portion of tin in the smaller pores for the Sn-SBA-15 materials synthesized through cocatalyst method. (C) 2009 Elsevier Inc. All rights reserved.

}, keywords = {Baeyer-Villiger oxidation, catalysis, Functionalization of mesopores, Meerwin-Pondorf-Verly reduction, Sn-SBA-15}, issn = {1387-1811}, doi = {10.1016/j.micromeso.2009.05.038}, author = {Sasidharan, M. and Kiyozumi, Y. and Mal, N. K. and Paul, M. and Rajamohanan, P. R. and Bhaumik, Asim} } @article { ISI:000276206700037, title = {Kinetics of reductive alkylations of phenylenediamines: influence of substrates isomeric structure}, journal = {Chemical Engineering Science}, volume = {65}, number = {1, SI}, year = {2010}, note = {20th International Symposium on Chemical Reaction Engineering, Kyoto, JAPAN, SEP, 2008}, month = {JAN}, pages = {232-239}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Reductive alkylation of ortho-, meta- and para-phenylenediamines (PDAs) with methyl ethyl ketone (MEK) has been studied in a semi-batch slurry reactor in the presence of a commercial 3\% Pt/Al(2)O(3) catalyst. It was observed that the PDA isomers differ remarkably from each other in their activity in reductive alkylation and product distribution. The activity was found to decrease in the following order: PPDA \> OPDA \> MPDA. To understand the substrate structure-activity correlation, the homogeneous equilibrium reactions involved in the alkylation step and the overall catalytic reactions were studied separately. Kinetics of reductive alkylation of PDAs with MEK as a solvent and alkylating agent with 3\% Pt/Al(2)O(3) catalyst was studied in a semi-batch slurry reactor over a temperature range of 373-453K and pressure range of 2.07-6.21 MPa. Semi-batch slurry reactor models were developed and kinetic parameters were estimated by fitting the integral batch reactor data at different temperatures to understand the influence of different reaction steps on the activity and selectivity of different products. Published by Elsevier Ltd.

}, keywords = {Batch, catalysis, kinetics, Multiphase reactions, Phenylenediamines, Reaction engineering, Reductive alkylation}, issn = {0009-2509}, doi = {10.1016/j.ces.2009.06.065}, author = {Roy, Debdut and Chaudhari, Amit S. and Chaudhari, Raghunath V.} } @article { ISI:000284557000009, title = {Incorporation of zirconium in medium-pore aluminophosphate molecular sieves with AFO framework}, journal = {Microporous and Mesoporous Materials}, volume = {137}, number = {1-3}, year = {2011}, month = {JAN}, pages = {65-71}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Zirconium substituted medium pore microporous aluminophosphate molecular sieve ZrAPO-41 was prepared by hydrothermal synthesis under autogenous pressure The formation of the pure phase was confirmed by powder X-ray diffraction (XRD) and scanning electron microscopy (SEM)The thermal behaviour of the material was investigated by carrying out thermogravimetric/differential thermal analysis (TGA/DTA) The zirconium environment was studied by magic-angle spinning nuclear magnetic resonance (MAS NMR) spectroscopy which suggests incorporation of zirconium into the framework UV-Visible diffuse reflectance study also supports the claim The temperature programmed desorption (TPD) of ammonia reveals that the acidity of ZrAPO 41 samples is higher than that of pure AlPO4-41 The catalytic activity of the samples was investigated through phenol hydroxylation reaction The result show hi E her catalytic activity for ZrAPO-41 samples compared to AlPO4-41 (C) 2010 Elsevier Inc All rights reserved

}, keywords = {AFO, Aluminophosphate, catalysis, Molecular sieve, ZrAPO 41}, issn = {1387-1811}, doi = {10.1016/j.micromeso.2010.08.022}, author = {Chakrabortty, Dhruba and Ganguli, J. N. and Satyanarayana, C. V. V.} } @article { ISI:000294237100001, title = {Lanthanum and zinc incorporated hydrotalcites as solid base catalysts for biodiesel and biolubricants production}, journal = {Indian Journal of Chemistry Section A-Inorganic Bio-Inorganic Physical Theoretical \& Analytical Chemistry}, volume = {50}, number = {8}, year = {2011}, month = {AUG}, pages = {1017-1025}, publisher = {NATL INST SCIENCE COMMUNICATION-NISCAIR}, address = {DR K S KRISHNAN MARG, PUSA CAMPUS, NEW DELHI 110 012, INDIA}, abstract = {

Mg-Al hydrotalcites doped with varying amounts of lanthanum and zinc ions (10 30 mol \%) have been prepared by co-precipitation method and used, after calcination at 873 K, as solid base catalysts for transesterification of soybean oil with methanol (producing biodiesel) and n-octanol (producing biolubricants). The catalyst with 20 mol \% of lanthanum shows the highest transesterification activity (soybean oil conversion = 100 \% and biodiesel yield = 95 \%) at 423 K in 4 h. Catalytic activity varies in proportion with the basicity of the catalysts.

}, keywords = {Biodiesel, Biolubricants, catalysis, Doped hydrotalcites, Hydrotalcites, Lanthanum, Solid base catalysts, transesterification, Vegetable oils, zinc}, issn = {0376-4710}, author = {Rahul, R. and Satyarthi, Jitendra K. and Srinivas, D.} } @article { ISI:000297791400001, title = {Organocatalytic asymmetric 1,6-addition reactions}, journal = {Chemcatchem}, volume = {3}, number = {12}, year = {2011}, month = {DEC}, pages = {1847-1849}, publisher = {WILEY-BLACKWELL}, address = {COMMERCE PLACE, 350 MAIN ST, MALDEN 02148, MA USA}, keywords = {Asymmetric synthesis, catalysis, Michael addition, organocatalysis, phase-transfer catalysis}, issn = {1867-3880}, doi = {10.1002/cctc.201100279}, author = {Biju, Akkattu T.} } @article { ISI:000312472000040, title = {Gold nanoparticle embedded hydrogel matrices as catalysts: better dispersibility of nanoparticles in the gel matrix upon addition of N-bromosuccinimide leading to increased catalytic efficiency}, journal = {Colloids and Surfaces A-Physicochemical and Engineering Aspects}, volume = {414}, year = {2012}, month = {NOV}, pages = {296-301}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

A simple and convenient method for generating and immobilizing gold NPs into polyethylene glycol-polyurethane (PEGPU) matrices is presented. The gold NP immobilized PEGPU (Au NP-PEGPU) hydrogel matrices are easy to handle and can be used as catalysts. The efficiency, reusability and durability of the Au NP-PEGPU catalyst matrices were investigated using the reduction of 4-nitroaniline (4NA) to p-phenylenediamine (p-PDA) by sodium borohydride in the presence of the catalyst as a test reaction. The Au NPs in the PEGPU matrix got aggregated after 3 cycles of catalysis but dispersion could be regenerated by the addition of N-bromosuccinimide (NBS). After this regeneration process the Au NPs-PEGPU matrix showed excellent efficiency without any aggregation, leaching or degradation. The reusability of the catalyst for 28 cycles yielding a total turnover number of 3220 and turn over frequency of 0.152 s(-1) is demonstrated. (C) 2012 Elsevier B.V. All rights reserved.

}, keywords = {catalysis, hydrogels, Immobilization, Nanoparticles, Turn over numbers}, issn = {0927-7757}, doi = {10.1016/j.colsurfa.2012.08.026}, author = {Ramtenki, Vilas and Anumon, V. D. and Badiger, Manohar V. and Bhagavatula L. V. Prasad} } @article { ISI:000328437300022, title = {Large centimeter-sized macroporous ferritin gels as versatile nanoreactors}, journal = {Chemistry of Materials}, volume = {25}, number = {23}, year = {2013}, month = {DEC}, pages = {4813-4819}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Organized assemblies of bionanoparticles such as ferritin provides templates that can be exploited for nanotechnological applications. Organization of ferritin into well-defined three-dimensional assemblies is challenging and has attracted considerable attention recently. We have synthesized, for the first time, large (centimeter-sized) self-standing macroporous scaffold monoliths from ferritin bionanoparticles, using dynamic templating of surfactant H-1 domains. These scaffolds comprise three-dimensionally connected strands of ferritin, organized as a porous gel with porosity similar to 55 mu m. The iron oxide inside the ferritin scaffold can be easily replaced with catalytically active monodisperse zerovalent transition metal nanoparticles using a very simple protocol. Since the ferritin is cross-linked in the scaffold, it is significantly robust with enhanced thermal stability and better tolerance toward several organic solvents in Comparison to the native ferritin bionanoparticle. In addition, the scaffold macropores facilitate substrate and reagent transport and hence the monoliths containing active Pd or iron oxide nanoparticles inside apo-ferritin bionanoparticles were used as a recyclable heterogeneous catalyst for the oxidation of 2,3,6-trimethyl phenol to 2,3,6-trimethyl-1,4-benzoquinone (precursor for Vitamin E synthesis) and for Suzuki-Miyaura cross-coupling reaction in both aqueous and organic solvents. The protein shell around the nanoparticles protects them from agglomeration, a phenomenon that otherwise plagues nanoparticles-based catalysis. The presence of macropores allow the ferritin scaffold to act as catalytic monolith for continuous flow reactions having rapid reaction rates, while offering a low pressure drop. Finally, the Pd@apo-ferritin scaffold was immobilized inside a steel cartridge and used for the continuous flow hydrogenation of alkenes to their corresponding alkanes for 15 cycles without any loss of activity.

}, keywords = {catalysis, continuous flow, ferritin, gel, macroporous materials, Self-assembly}, issn = {0897-4756}, doi = {10.1021/cm403240j}, author = {Kumari, Sushma and Kulkarni, Amol and Kumaraswamy, Guruswamy and Sen Gupta, Sayam} } @article { ISI:000318589100018, title = {Metal or nonmetal cooperation with a phenyl group: route to catalysis? a computational investigation}, journal = {ACS Catalysis}, volume = {3}, number = {5}, year = {2013}, month = {MAY}, pages = {920-927}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Full quantum mechanical calculations demonstrate that cooperativity in the form of the activation of the M-C bond (M: transition metal or boron, C: the ipso carbon of the coordinated phenyl group) can lead to effective catalysis pathways. Calculations show that the presence of an aromatic bidentate ligand attached to a transition metal, or even a main group element, such as boron, can lead to effective catalysts for,a, range of important reactions, such as the dehydrogenation of ammonia borane and formic acid and the activation of the N-H, bond in aromatic amities. Moreover, it is shown that the design of tridentate pincer complexes with the aromatic group at a terminal end can lead to effective M-C cooperativity. As such, the current work introduces a new concept in cooperativity and bond activation chemistry.

}, keywords = {catalysis, Density functional theory, metal-ligand cooperativity, small molecule activation}, issn = {2155-5435}, doi = {10.1021/cs400174u}, author = {Ghatak, Kamalika and Mane, Manoj and Vanka, Kumar} } @article {46390, title = {Ferromagnetic tetranuclear Cu(II) complex: catecholase and phenoxazinone synthase activities}, journal = {Acta Crystallographica A-Foundation and Advances}, volume = {70}, year = {2014}, month = {MAY}, pages = {C926}, type = {Meeting Abstract}, keywords = {catalysis, Ferromagnetic, Tetranuclear copper}, issn = {2053-2733}, author = {Mitra, Merry and Kundu, Tanay and Kaur, Gurpreet and Sharma, Gyaneswar and Choudhury, Angshuman Roy and Singh, Yogesh and Ghosh, Rajarshi} } @article { ISI:000338353000004, title = {Glycerol etherification using n-butanol to produce oxygenated additives for biodiesel fuel over H-beta zeolite catalysts}, journal = {Energy Technology}, volume = {2}, number = {5}, year = {2014}, month = {MAY}, pages = {446-452}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

The catalytic etherification of glycerol has been systematically studied in batch process by using n-butanol to produce oxygenated additives for biodiesel fuels over various solid-acid catalysts, such as H-beta zeolite, ZSM-5, K10, etc.. The present work includes a detailed study of the optimization of the etherification process parameters, such as catalyst loading (7-20 wt\% of glycerol), molar ratio of glycerol/n-butanol (1: 6 to 1: 15), speed of agitation (100-400 rpm), reaction temperature (413-453 K), and reaction time (0.5-4 h) in view of maximizing the glycerol conversion and selectivity towards mono-butyl-glycerol ether (ME). The catalyst reusability was studied using the optimized process parameters. Amongst the studied catalysts, the H-beta zeolite was found to be the most promising for the etherification of glycerol with glycerol conversion of 55\% and a 98\% selectivity towards ME formation. The H-beta zeolite was found to be an active and stable catalyst for up to 4 cycles. The use of n-butanol as alkylating agent is presented for first time, to the authors knowledge. The reaction was performed at milder operating conditions (0.5 MPa) than previously reported (2 MPa). A kinetic model was developed for the etherification reaction and the data obtained at optimized process parameters was used to calculate the kinetic parameters. The reaction rate constants at different reaction temperatures, activation energies, and pre-exponential factors were obtained for the etherification reaction with an accuracy of R-2 \> 0.989.

}, keywords = {biofuels, catalysis, etherification, fuel additives, zeolites}, issn = {2194-4288}, doi = {10.1002/ente.201300169}, author = {Nandiwale, Kakasaheb Y. and Patil, Shivraj E. and Bokade, Vijay V.} } @article { ISI:000350056800015, title = {Proline-catalyzed alpha-aminooxylation of beta-amino aldehydes: access to enantiomerically pure syn- and anti-3-amino-3-aryl-1,2-alkanediols}, journal = {Synlett}, volume = {26}, number = {3}, year = {2015}, month = {FEB}, pages = {355-358}, publisher = {GEORG THIEME VERLAG KG}, address = {RUDIGERSTR 14, D-70469 STUTTGART, GERMANY}, abstract = {

A new synthetic method for enantioselective synthesis of syn 3-amino-3-aryl-1,2-alkanediols via praline catalyzed alpha-aminaoxn y ylation of beta-amino aldehydes des are described. This methodology is successfully applied to a concise and protecting group-free asymmetric synthesis of (-)-cytoxazone (+)-epi-cytoxazone and formal synthesis of N-thiolated 2-oxazolidinone.

}, keywords = {amino aldehydes, Asymmetric synthesis, catalysis, diastereoselectivity, Enantioselectivity, Natural product}, issn = {0936-5214}, doi = {10.1055/s-0034-1379735}, author = {Venkataramasubramanian, V. and Kiran, I. N. Chaithanya and Sudalai, Arumugam} } @article {45634, title = {Mechanistic and spectroscopic investigations of Ru3+-catalyzed oxidative degradation of azidothymidine by heptavalent manganese at environmentally relevant pH}, journal = {Desalination and Water Treatment}, volume = {57}, year = {2016}, month = {DEC}, pages = {28349-28362}, type = {Article}, abstract = {

The rapid increase in the population across the world has increased the consumption of pharmaceutical substances. These pharmaceutical substances have penetrated into the water through various ways. Mechanistic and spectroscopic investigations of Ru3+-catalyzed oxidative degradation of azidothymidine (AZT) by heptavalent manganese was studied for the first time. The values of pH-dependent apparent second-order rate constant show that Ru3+ accelerates the rate of the oxidative degradation of AZT by heptavalent manganese eight times faster than uncatalyzed reaction. Ru3+ catalytic oxidative degradation of AZT by heptavalent manganese was greatly depending on the pH. The removal of the AZT by heptavalent manganese in the presence of Ru3+ shows unit order with respect to heptavalent manganese, Ru3+, and AZT. The influences of dielectric constant, ionic strength, pH, addition of monomer, variation in catalyst concentration, etc. on the rate of the reaction were studied thoroughly and discussed in detail. The eight different products produced during the reaction were analyzed using the high-resolution mass spectrometry. Activation parameters were determined from variation in temperature during the reaction. The catalytic plausible mechanism was projected in which Ru3+ is oxidized to higher oxidation states of ruthenium by heptavalent manganese at environmentally relevant pH.

}, keywords = {Azidothymidine, catalysis, Degradation, Heptavalent manganese, kinetics, Mechanism}, issn = {1944-3994}, doi = {10.1080/19443994.2016.1187090}, author = {Kulkarni, Raviraj M. and Bhamare, Vijaykumar S. and Santhakumari, B.} } @article {44014, title = {Influence of carbon based supports on selectivity behavior of diols and propanol in Ru catalyzed glycerol hydrogenolysis}, journal = {Applied Catalysis B: Environmental}, volume = {204}, year = {2017}, month = {MAY}, chapter = {134-146}, abstract = {

Activated carbon (AC) and three graphite materials were studied as supports for Ru catalyzed glycerol hydrogenolysis to propanediols and 1-propanol. Structural characteristics of AC and graphite materials were found to greatly affect the reducibility and particle size of supported Ru and hence, the activity and product distribution in glycerol hydrogenolysis. XRD of graphite materials showed distinctly (002) plane having highly organized layered structure and the peak intensity decreased in the order of Ru/KS150 \> Ru/HSAG100 \> Ru/KS6 due to decrease in the graphite sheet thickness. In Raman, the intense D band in HSAG100 compared to that in KS6 and KS150 samples indicated its highly amorphous nature or mixed carbon hybridization. Glycerol conversion for Ru on AC was higher than that on graphite and among different graphites, it showed a descending activity order of Ru/KS6 \> Ru/HSAG100 \> Ru/KS150. The product distribution for AC and HSAG100 supported Ru was similar, giving 1-propanol (45\%) alongwith 1,2-propanediol (1,2-PDO) (37\%) and 1,3-propanediol (1,3-PDO) (9{\textendash}11\%). For graphite supports, availability of Ru although bigger in size (4{\textendash}5 nm), would be higher on the surface than in case of AC which formed deep hydrogenolysis products like 1-, 2- propanol, ethanol etc.

}, keywords = {activated carbon, Amorphous carbon, catalysis, Glycerol, Glycerol conversions, Glycerol hydrogenolysis, graphite composites, Graphite supports, Hydrogenolysis, Hydrolysis, layered structures, Particle size, Product distributions, Propanediols, Propanol, Selectivity behavior, Structural characteristics, Structural effect, Structural effects}, issn = {0926-3373}, doi = {10.1016/j.apcatb.2016.11.032}, author = {Mane, Rasika B. and Patil, S. and Shirai, Masayuki and Rayalu, Sadhana S. and Rode, Chandrashekhar V.} } @article {43870, title = {NiZn double hydroxide nanosheet-anchored nitrogen-doped graphene enriched with the gamma-NiOOH phase as an activity modulated water oxidation electrocatalyst}, journal = {Nanoscale}, volume = {9}, year = {2017}, month = {SEP}, pages = {12590-12600}, type = {Journal Article}, chapter = {12590-12600}, abstract = {

Herein, we report a facile solvothermal process to synthesize an active electrocatalyst for the oxygen evolution reaction (OER) in an alkaline medium by anchoring nanosheets of a NiZn double hydroxide over nitrogen doped reduced graphene oxide after enriching the system with the γ-NiOOH phase. This catalyst possesses a thin, porous and open layered structure, which makes the system more efficient and accessible for a better electrochemical water oxidation reaction. Moreover, we experimentally demonstrated that incorporation of Zn via a single-step solvothermal method provides an easy approach to obtain plenty of exposed γ-NiOOH phases to make the system more viable for OER with a small overpotential of 290 mV at 10 mA cm-2 and a Tafel slope of 44 mV per decade. In addition to this, the oxophilic nature of Zn in the (Zn)Ni-LDH/N-rGO catalyst helps to improve the long-term stability of the whole system. The obtained results open up possibilities for the design of future robust OER electrocatalysts by the use of very cheap and abundant materials like Ni and Zn in place of expensive Ir and Ru in the present commercial electrocatalysts.

}, keywords = {catalysis, Efficient Electrocatalyst, kinetics, Metal, Nickel-Hydroxide, oxide, Oxygen Evolution Reaction, performance, XPS Spectra, zinc}, issn = {2040-3364}, doi = {10.1039/c7nr02225e}, author = {Nadeema, Ayasha and Dhavale, Vishal M. and Kurungot, Sreekumar} } @article {43879, title = {Pd-catalyzed regioselective mono-arylation: quinazolinone as the inherent directing group for C(sp(2))-H activation}, journal = {Journal of Organic Chemistry}, volume = {82}, year = {2017}, month = {JUN}, pages = {6366-6372}, type = {Article}, chapter = {6366-6372}, abstract = {

The Pd-catalyzed quinazolinone-directed regioselective monoarylation of aromatic rings by C-H bond activation is developed. A broad substrate scope is demonstrated for both quinazolinone as well as diary-liodonium triflates. The use of a base was found to be crucial for this transformation, unlike for the known nitrogen-directed arylations. All of the novel quinazolinones of biological interest were synthesized by using the operationally simple Pd(II)-catalyzed arylation reaction.

}, keywords = {Aromatic rings, catalysis, Chemical activation, Chemical reactions, Palladium compounds, Regioselectivity}, issn = {0022-3263}, doi = {10.1021/acs.joc.7b00948}, author = {Garad, Dnyaneshwar N. and Viveki, Amol B. and Mhaske, Santosh B.} } @article {43972, title = {Preparation of MgO supported platinum nanoparticle catalyst using toluene dispersed platinum sol}, journal = {Applied Surface Science}, volume = {418}, year = {2017}, month = {OCT}, pages = {874-91}, type = {Journal Article}, abstract = {

An effective way of anchoring Pt nanoparticles on MgO using toluene dispersed platinum nanoparticles (Pt-NPs) as one of the ingredient is demonstrated. The usage of particles dispersed in toluene allows the retention of size and size distribution of preformed Pt-NPs even after deposition on MgO support with high active surface area, which is crucial for heterogeneous catalysis. The catalyst thus prepared, displayed selective hydrogenation of cinnamaldehyde to cinnamyl alcohol with high turn on frequency (TOF - 105 h-1) with respect to the total Pt content. We attribute this efficient catalytic performance to the uniform distribution and deposition of Pt on the active MgO support and its better accessible surface as evidenced by the cyclic-voltammetry results.

}, keywords = {catalysis, Catalysts, cyclic voltammetry, Deposition, Magnesia, Nanoparticles, sol-gel process}, doi = {10.1016/j.apsusc.2016.12.058}, author = {Seth, J. and Nepak, D. and Chaudhari, V. R. and Prasad, B.L.V.} } @article {45527, title = {Operando X-ray absorption spectroscopy study of the Fischer-Tropsch reaction with a Co catalyst}, journal = {Journal of Synchrotron Radiation}, volume = {26}, year = {2019}, month = {JAN}, pages = {137-144}, type = {Article}, abstract = {

This article describes the setting up of a facility on the energy-scanning EXAFS beamline (BL-09) at RRCAT, Indore, India, for operando studies of structure-activity correlation during a catalytic reaction. The setup was tested by operando X-ray absorption spectroscopy (XAS) studies performed on a Co-based catalyst during the Fischer-Tropsch reaction to obtain information regarding structural changes in the catalyst during the reaction. Simultaneous gas chromatography (GC) measurements during the reaction facilitate monitoring of the product gases, which in turn gives information regarding the activity of the catalyst. The combination of XAS and GC techniques was used to correlate the structural changes with the activity of the catalyst at different reaction temperatures. The oxide catalyst was reduced to the metallic phase by heating at 400 degrees C for 5h under H-2 at ambient pressure and subsequently the catalytic reaction was studied at four different temperatures of 240, 260, 280 and 320 degrees C. The catalyst was studied for 10h at 320 degrees C and an attempt has been made to understand the process of its deactivation from the XANES and EXAFS results.

}, keywords = {catalysis, EXAFS, Fischer-Tropsch reaction, in situ studies, structure-activity correlation, XANES}, issn = {1600-5775}, doi = {10.1107/S1600577518015588}, author = {Nayak, Chandrani and Jain, Preeti and Vinod, C. P. and Jha, S. N. and Bhattacharyya, D.} } @article {46995, title = {Highly enantioselective synthesis of sitagliptin}, journal = {Asian Journal of Organic Chemistry}, volume = {9}, year = {2020}, month = {FEB}, pages = {189-191}, type = {Article}, abstract = {

A highly enantioselective synthesis of sitagliptin, a potent DPP-4 inhibitor, is reported. Explicitly identified chiral FerroLANE ligands in the presence of rhodium catalyze the asymmetric hydrogenation of an enamine to yield sitagliptin with excellent enantioselectivity (98\% ee). The process was scaled up to 5 g and the final product was isolated as a phosphate salt with \>99\% ee.

}, keywords = {asymmetric hydrogenation, catalysis, FerroLANE ligands, Rhodium, sitagliptin}, issn = {2193-5807}, doi = {10.1002/ajoc.201900709, Early Access Date = JAN 2020}, author = {Khopade, V. Kishor and Sen, Anirban and Birajdar, Rajkumar S. and Paulbudhe, Uday P. and Kavale, Dattatry S. and Shinde, Prashant S. and Mhaske, Santosh B. and Chikkali, Samir H.} } @article {47753, title = {Supported MoOx and WOx solid acids for biomass valorization: interplay of coordination chemistry, acidity, and catalysis}, journal = {ACS Catalysis}, volume = {11}, year = {2021}, month = {NOV}, pages = {13603-13648}, type = {Article}, abstract = {Supported molybdenum oxide (MoOx) and tungsten oxide (WOx) materials are a vital class of solid acid catalysts for the chemical industry because of their nontoxic nature, strong acidity, remarkable stability in water, hydrogen, and oxygen atmospheres, and excellent reusability performance. These fascinating solid acids play a pivotal role in developing sustainable catalytic routes for renewable biomass processing to produce value-added fuels, chemicals, and platform molecules. The coordination chemistry of MoOx and WOx on the support materials (oxides, carbons, or zeolites) controls their acidic strength, active site accessibility, and catalytic activity. Hence, significant efforts have been made toward optimizing the conditions used for catalyst synthesis and biomass processing to tune the coordination chemistry of MoOx and WOx with the substrate molecules and, thus, their acid-activity/selectivity performance. This Review provides a comprehensive overview of supported MoOx and WOx solid acids for biomass valorization. The importance of the biomass and the role of solid acids for biomass valorization were emphasized, followed by a brief discussion of supported MoOx and WO(x )solid acids. Afterward, the interplay of coordination chemistry, acidic strength, and catalytic activity of supported MoOx and WOx solid acids was discussed. Finally, their catalytic applications for the valorization of several biomass substrates and their derivatives were summarized. This Review will provide valuable insights for developing advanced supported WOx and MoOx solid acids for catalytic biomass valorization and other challenging acid-catalyzed processes.}, keywords = {Acidity, biomass valorization, catalysis, Coordination chemistry, molybdenum oxide, tungsten oxide}, issn = {2155-5435}, doi = {10.1021/acscatal.1c03326}, author = {Sudarsanam, Putla and Gupta, Navneet Kumar and Mallesham, Baithy and Singh, Nittan and Kalbande, Pavan Narayan and Reddy, Benjaram M. and Sels, Bert F.} } @article {48101, title = {Efficient synthesis of 5-(hydroxymethyl)furfural esters from polymeric carbohydrates using 5-(chloromethyl)furfural as a reactive intermediate}, journal = {ACS Sustainable Chemistry \& Engineering}, volume = {10}, year = {2022}, month = {MAY}, pages = {5803-5809}, type = {Article}, abstract = {

This work reports an efficient, gram-scale synthesis of 5-(hydroxymethyl)furfural (HMF) esters using biomass-derived 5-(chloromethyl)furfural (CMF) as a reactive intermediate. The HMF-esters have potential applications as chemicalintermediates, fuel additives, and bioactive compounds. Initially, CMF was prepared in good yields directly from polymericcarbohydrates (starch, inulin, and cellulose) and cellulosic materials (cotton andfilter paper) using a biphasic batch reaction system,consisting of aqueous hydrochloric acid and 1,2-dichloroethane. The use of ZnCl2as an additive allowed the reaction to proceedunder milder conditions while significantly improving the isolated yield of CMF. The effects of reaction temperature, reaction time,extracting solvent, and ZnCl2loading on CMF yield were investigated. Microcrystalline cellulose was converted into CMF with a72\% isolated yield under optimized reaction conditions (80 degrees C, 2 h). After that, CMF was transformed into various novel esters ofHMF in excellent isolated yields (\>85\%) by reacting with a slight excess amount of the triethylammonium salt of various alkyl/arylcarboxylic acids under solvent-free conditions

}, keywords = {catalysis, cellulose, furanics, HMF-esters, renewable synthesis}, issn = {2168-0485}, doi = {10.1021/acssuschemeng.1c08571}, author = {Bhat, Navya Subray and Hegde, Shobhita L. and Dutta, Saikat and Sudarsanam, Putla} } @article {48120, title = {Highly efficient and reusable polymer supported palladium catalyst for copper free sonogashira reaction in water}, journal = {ChemistrySelect}, volume = {7}, year = {2022}, month = {APR}, pages = {e202104273}, type = {Article}, abstract = {

Development of a novel, greener and efficient heterogeneous catalytic system for copper free Sonogashira reaction in water is described. This novel catalyst can be easily prepared by a simple method through synthetic modification of nitrile group in Polyacrylonitrile (PAN) using monoethanolamine (MEA) followed by its complexation with palladium chloride (PdCl2). The resulting polymer Pd complex (mPAN-Pd) was characterized by means of Fourier Transform Infrared Spectroscopy (FTIR), Energy-Dispersive X-ray Spectroscopy (EDAX), Inductively Coupled Mass Spectrometry (ICP-MS) and X-ray Photo Electron Spectroscopy (XPS) analyses. mPAN-Pd was then explored as highly efficient heterogeneous catalyst for Sonogashira coupling reaction under copper and ligand free conditions in water affording the corresponding coupling products up to 97 \% isolated yield. Moreover, the catalyst was recovered by simple filtration after the reaction and reused for next 5 cycles with excellent stability and activity. This is the first report on the use of ethanolamine modified PAN Pd (II) complex as an efficient heterogeneous catalyst for a coupling reaction.

}, keywords = {catalysis, green chemistry, Palladium, Polymer Support, Sonogashira coupling}, issn = {2365-6549}, doi = {10.1002/slct.202104273}, author = {Sruthi, Pambingal Rajan and Nimmi, Puthan Purayil and Babu, Sukumaran Santhosh and Anas, Saithalavi} } @article {47805, title = {Hydroformylation of olefins by metals other than rhodium}, journal = {Journal of Organometallic Chemistry}, volume = {960}, year = {2022}, month = {FEB}, pages = {122231}, type = {Article}, abstract = {Metal catalyzed hydroformylation of alkenes is an atom economic transformation to construct useful aldehydes and is being industrially practiced for decades. The most commonly used metal for this transformation on an industrial scale is rhodium. However, rhodium is rare, costly, and is depleting at a skyrocketing rate. Therefore, finding a suitable alternative to rhodium for metal-catalyzed hydroformylation has been on the radar of many academic and industrial researchers. This review presents the scientific advancements reported in the hydroformylation reaction using metals other than rhodium. An overview of recent progress in palladium, iridium, ruthenium, cobalt, platinum, and iron-catalyzed hydroformylation is presented. Hydroformylation of alkenes and alkynes, using syngas as well as syngas surrogates is examined. The evaluation of the current status of non-rhodium metals in hydroformylation suggests that the field is still in a nascent stage and, except cobalt, no other metal poses a significant challenge to the dominance of rhodium. Deep mechanistic understanding of rate-limiting elementary steps in the non-rhodium metals is largely missing and thus only limited success is reported. Intense research on ligand design, mechanistic understanding, and choice of non-rhodium metal precursors may change this scenario in near future.}, keywords = {aldehydes, alkenes, catalysis, Hydroformylation, Non-rhodium metals}, issn = {0022-328X}, doi = {10.1016/j.jorganchem.2021.122231}, author = {Kumar, Rohit and Chikkali, Samir H.} } @article {48061, title = {Looking beyond adsorption energies to understand interactions at surface using machine learning}, journal = {ChemistrySelect}, volume = {7}, year = {2022}, month = {OCT}, pages = {e202202414}, type = {Article}, abstract = {

Identifying factors that influence interactions at the surface is still an active area of research. In this work, the importance of analyzing bond length activations (BLact) along with adsorption energies (E-a) while interpreting Density Functional Theory (DFT) results is emphasized. Investigating adsorption of different small molecules, such as O-2, N-2, CO, and CO2, on commonly studied facets ((100), (110), and (111)) of seven fcc transition metal surfaces (M=Ag, Au, Cu, Ir, Rh, Pt, and Pd) demonstrates the missing linear correlation between E-a and BLact. Further, tree based Machine Learning (ML) models reinforce the missing linear correlation between the two parameters and also highlight the importance of analyzing both to develop a better understanding of adsorption at surfaces. The best performing Random Forest models have a mean absolute error (MAE) of 0.19 eV for E-a prediction, and even lower MAE of 0.012 angstrom for BLact prediction. While often d-band center is correlated with E-a, our observations show that infact the d-band center has a better correlation with BLact. These observations emphasizes the role of BLact in gaining a fuller picture for catalysis. The fact that the factors responsible for BLact is a lesser-explored subject adds to the novelty of the findings.

}, keywords = {Adsorption energy, Bondlength activation, catalysis, DFT, machine learning}, issn = {2365-6549}, doi = {10.1002/slct.202202414}, author = {Agarwal, Sheena and Joshi, Kavita} } @article {47899, title = {Mechanistically guided one pot synthesis of phosphine-phosphite and its implication in asymmetric hydrogenation}, journal = {European Journal of Organic Chemistry}, volume = {2022}, year = {2022}, month = {JAN}, pages = {e202101447}, type = {Article}, abstract = {

Although hybrid bidentate ligands are known to yield highly enantioselective products in asymmetric hydrogenation (AH), synthesis of these ligands is an arduous process. Herein, a one pot, atom-economic synthesis of a hybrid phosphine-phosphite (L1) is reported. After understanding the reactivity difference between an 0-nucleophile versus C-nucleophile, one pot synthesis of Senphos (L1) was achieved (72\%). When L1 was treated with [Rh], P-31 NMR revealed bidentate coordination to Rh. Senphos, in the presence of rhodium, catalyzes the AH of Methyl-2-acetamido-3-phenylacrylate and discloses an unprecedented turn over frequency of 2289, along with excellent enantio-selectivity (92\%). The generality is demonstrated by hydrogenating an array of alkenes. The AH operates under mild conditions of 1-2 bar H-2 pressure, at room temperature. The practical relevance of Ll is demonstrated by scaling-up the reaction to 1 g and by synthesizing DOPA, a drug widely employed for the treatment of Parkinson{\textquoteright}s disease. Computational insights indicate that the R isomer is preferred by 3.8 kcal/mol over the S isomer.

}, keywords = {asymmetric hydrogenation, catalysis, DOPA synthesis, One pot synthesis, Phosphine-phosphite ligand}, issn = {1434-193X}, doi = {10.1002/ejoc.202101447}, author = {Sen, Anirban and Kumar, Rohit and Pandey, Swechchha and Raj, K. Vipin and Kumar, Pawan and Vanka, Kumar and Chikkali, Samir H.} } @article {48072, title = {Perception of glycerol carbonate as green chemical: synthesis and applications}, journal = {Catalysis Communications}, volume = {172}, year = {2022}, month = {DEC}, pages = {106542}, type = {Article}, abstract = {

Glycerol carbonate (GC) is a prominent component in industrial practice and has a remarkable potential for the sophisticated applications. While GC has come into prominence due to the perceived overflow of glycerol (GLY) as a coproduct of biodiesel industry, its contemporary and future downstream applications are driving tremendous interest in recent years. This review comprises strategies for glycerol carbonate synthesis, properties and its applications. The conversion of GLY to GC via transesterification has appeared in consensus to be the most promising route. A detailed explanation of the effect of the catalysts and operating conditions on the GC yield to provide an updated understanding of the process are summarized. Future directions for GC production through catalytic transesterification are also discussed.

}, keywords = {Biodiesel, biofuels, catalysis, Glycerol, Glycerol carbonate, green chemistry, transesterification}, issn = {1566-7367}, doi = {10.1016/j.catcom.2022.106542}, author = {Gade, Swapna M. and Saptal, Vitthal B. and Bhanage, Bhalchandra M.} } @article {48151, title = {Tailored synthesis of ultra-stable Au@Pd nanoflowers with enhanced catalytic properties using cellulose nanocrystals}, journal = {Carbohydrate Polymers}, volume = {292}, year = {2022}, month = {SEP}, pages = {119723}, type = {Article}, abstract = {

A green strategy for the synthesis of bimetallic core-shell Au@Pd nanoflowers (NFs) employing banana pseudostem-derived TEMPO-oxidized cellulose nanocrystals (TCNC) as both capping and shape-directing agent via seed-mediated method is presented. Flower-like nanostructures of Au@Pd bound to TEMPO-oxidized cellulose nanocrystals (TCNC-Au@Pd) were decorated on amino-functionalized graphene (NH2-RGO) without losing their unique structure, allowing them to be deployed as an efficient, reusable and a green alternative heterogeneous catalyst. The decisive role of TCNC in the structural metamorphosis of nanoparticle morphology were inferred from the structural and morphology analyses. According to our study, the presence of -OH rich TCNC appears to play a pivotal role in the structured evolution of intricate nanostructure morphology. The feasibility of the bio-supported catalyst has been investigated in two concurrently prevalent model catalytic reactions, namely the oxygen reduction reaction (ORR) and the reduction of 4-nitrophenol, the best model reactions in fuel cell and industrial catalytic applications, respectively.

}, keywords = {Au@Pd, catalysis, Cellulose nanocrystals, Nanoflowers, oxygen reduction reaction}, issn = {0144-8617}, doi = {10.1016/j.carbpol.2022.119723}, author = {Hakkeem, Hasna M. Abdul and Babu, Aswathy and Shilpa, Nagaraju and Venugopal, Adithya A. and Mohamed, A. P. and Kurungot, Sreekumar and Pillai, Saju} } @article {48284, title = {Low-temperature preferential CO oxidation in a hydrogen-rich stream over Pt-NaY and modified Pt-NaY catalysts for fuel cell application}, journal = {Fuel Cells}, volume = {23}, year = {2023}, month = {FEB}, pages = {15-28}, type = {Article}, abstract = {

Preferential oxidation of CO (CO-PROX) in the hydrogen-rich stream has been carried out over Pt-NaY catalysts containing various Pt loadings along with Fe, Co, and Au. Catalysts have been characterized with inductively coupled plasma-atomic emission spectroscopy, Brunauer, Emmett, and Teller surface area, X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, temperature programmed reduction, and Pt dispersion. CO-PROX activities and CO oxidation selectivities are observed to increase with an increase in Pt content. Pt-NaY catalyst with 0.75 wt.\% Pt loading shows maximum CO-PROX activity at low temperatures. An increase in space velocity decreases the CO and O-2 conversions, but CO oxidation selectivity increases. A decrease in activity is observed when reformat gas contains around 20\% H2O. During the stability test, no change in CO and O-2 conversions is observed, but a small increase in the CO oxidation selectivity is noticed after 10 h indicating that the Pt-NaY catalyst is a promising candidate for CO-PROX reaction in a hydrogen-rich stream. The Pt-Fe-NaY catalyst shows better activity than the Pt-NaY catalyst but starts deactivating after 10 h. However, activity is observed to decrease over Pt-Co-NaY and Pt-Au-NaY catalysts. Pt-Fe-NaY catalyst with 0.75 and 0.35 wt.\% Pt and Fe, respectively, shows better CO-PROX activity at a temperature of 75 degrees C.

}, keywords = {catalysis, CO oxidation, experimental results, flow bed, Fuel Cell Applications, Hydrogen, X-ray photoelectron spectroscopy}, issn = {1615-6846}, doi = {10.1002/fuce.202200134}, author = {Malwadkar, Sachin and Bera, Parthasarathi and Satyanarayana, Chilukuri V. V.} } @article {48925, title = {Rh-catalyzed asymmetric hydroformylation of olefins using phosphorus ligands}, journal = {Journal of chemical sciences }, volume = {135}, year = {2023}, month = {NOV }, pages = {108}, type = {Article}, abstract = {

Easily accessible BINOL-based monodentate phosphite ligand L1 and hybrid ligand L2 have been synthesized in good yield by following a one-pot, two-step protocol. A single 31P resonance at 146.6 ppm confirmed the formation of L1. Subsequent 1-2D NMR and mass spectrometric analysis authenticated the existence of L1. These ligands afforded excellent activity and regio-selectivity in the Rh-catalyzed AHF of styrenic substrates. L1 showed excellent regioselectivity but did not discriminate between the two enantiomers, while L2 displayed an enantiomeric excess (ee) of up to 20\%. In our attempts to understand the reasons for low ee, the coordination behavior of L2 was investigated. The coordination study revealed that L2 coordinates with the Rh as a monodentate ligand, although there are two P-sites. It was found that only the phosphine arm was coordinated to the Rh and the phosphite arm stayed away from the Rh core at the ambient temperature, leading to moderate ee.Graphical abstractOne-step synthesis of a phosphite (L1) and a phosphine-phosphite (L2) ligand and their implication in the asymmetric hydroformylation of olefins with excellent regioselectivity (\>95\%) and moderate enantioselectivity (up to 20\%) is reported.

}, keywords = {catalysis, coordination, Hydroformylation, Phosphine-phosphite ligand, Phosphite ligand}, issn = {0974-3626}, doi = {10.1007/s12039-023-02227-5}, author = {Kumar, Rohit and Sen, Anirban and Chikkali, Samir H.} } @article {49073, title = {Investigation of structural and morphological insights of nanostructured layered double hydroxides: catalytic activity in aldol condensation}, journal = {Journal of Porous Materials }, volume = {31}, year = {2024}, month = {APR}, pages = {759-778}, type = {Article}, abstract = {

Layered double hydroxides (LDHs) materials finds extensive applications in numerous fields such as medical science, industrial sector, agriculture and food, catalysis, polymers, nanotechnology, etc. The LDHs properties (structural, textural, morphological, spectroscopic and theoretical insights) can be design for achieving required materials for particular application in scientific areas. In the current investigation, we have synthesized mesoporous nanostructured LDHs materials via microwave, sonication and stirring method. The nanostructured LDHs was scientifically characterized by various physico-chemical techniques like XRD, N2 sorption, TGA, solid state one-dimensional 27Al magic angle spinning NMR spectroscopy, XPS, Raman Spectroscopy, FT-IR, ICP-OES, Electron Microscopy (SEM, FE-SEM, TEM and HR-TEM), EDX, elemental analysis, etc. On the basis of experimental study, it can be evidently witnessed that nanostructured LDHs materials was formed with good crystalline mesoporous nature. Solid state 27Al NMR showed single and sharp 27Al NMR signal at chemical shift value of + 1.4 ppm, strongly suggesting the presence of octahedral (Oh) AlO6 coordination site in all as-synthesized LDHs. Microwave and sonication techniques furnishes regularly dispersed well-developed flower-shaped nanocrystals however, stirring method gives mostly agglomerated nano-sized platelets. The mechanistic insights for the fabrication of nanostructures LDHs via microwave, sonication and stirring process were also highlighted. The different LDHs materials were utilized in the aldol condensation reaction of furfural with acetone for understanding structure-activity correlation. Microwave and sonication methodologies can be further exploited for the synthesis of many other inorganic-organic nanocomposites materials with stable and good dispersion of nanocrystals in addition to desired morphology and catalytic activity.

}, keywords = {Aldol condensation, catalysis, Flower-shaped nanocrystals, layered double hydroxides, Microwave and sonication techniques, Nanostructured materials}, issn = {1380-2224}, doi = {10.1007/s10934-023-01545-w}, author = {Bhagat, Shailesh K. and Nagpure, Atul S. and Lanjewar, Mamata R. and Gode, Nilesh G. and Thakare, Sanjay R.} } @article {48938, title = {Lanthanide mimicking by magnesium for oxazolidinone synthesis}, journal = {Chemistry- a european journal}, volume = {30}, year = {2024}, month = {JAN }, type = {Article}, abstract = {

In the last decade, magnesium complexes have emerged as a viable alternative to transition-metal catalysts for the hydrofunctionalization of unsaturated bonds. However, their potential for advanced catalytic reactions has not been thoroughly investigated. To address this gap, we have developed a novel magnesium amide compound (3) using a PNP framework that is both bulky and flexible. Our research demonstrates that compound 3 can effectively catalyze the synthesis of biologically significant oxazolidinone derivatives. This synthesis involves a tandem reaction of hydroalkoxylation and cyclohydroamination of isocyanate using propargyl alcohol. Furthermore, we conducted comprehensive theoretical calculations to gain insights into the reaction mechanism. It is important to note that these types of transformations have not been reported for magnesium and would significantly enhance the catalytic portfolio of the 7th most abundant element. A monomeric magnesium compound was employed as a catalyst for the cascade cyclization of propargylic alcohol and isocyanate, resulting in the formation of pharmaceutically significant oxazolidinone derivatives. This transformation, previously attributed solely to transition metals or lanthanides, signifies a noteworthy advancement.image

}, keywords = {catalysis, Magnesium, oxazolidinone, pincer ligand, Sustainability}, issn = {0947-6539}, doi = {10.1002/chem.202303478}, author = {Kumar, Rohit and Mahata, Biplab and Gayathridevi, S. and Raj, K. Vipin and Vanka, Kumar and Sen, Sakya S.} }