@article { ISI:000207804200008, title = {Single step synthesis and properties of M/MFe2O4 and PVDF/M/MFe2O4 (M = Co, Ni) magnetic nanocomposites}, journal = {Science of Advanced Materials}, volume = {1}, number = {3}, year = {2009}, month = {DEC}, pages = {262-268}, publisher = {AMER SCIENTIFIC PUBLISHERS}, address = {26650 THE OLD RD, STE 208, VALENCIA, CA 91381-0751 USA}, abstract = {

Metal/ferrite nanocomposites (M/MFe2O4; M = Co, Ni), consisting of nanoparticles of a metal and the corresponding metal ferrite, have been synthesized under in situ conditions by a simple and single step process. The metal/ferrite nanocomposites embedded in a polymer matrix have been prepared by a simple hot-pressing method. The performance parameters such as magnetization, coercivity, permeability and dielectric constant of the two- and three-phase nanocomposite systems are compared. The coercivity increases and the permeability decreases with increasing polymer content in the three-phase composite. Enhancement of the dielectric constant is observed at low frequencies.

}, keywords = {Dielectric, Ferrite, magnetic properties, Nanocomposite, Nanocrystalline, permeability}, issn = {1947-2935}, doi = {10.1166/sam.2009.1053}, author = {Deka, Sasanka and Joy, Pattayil Alias and Kumar, A. Pratheep} } @article { ISI:000349401200010, title = {Porous poly(ethylene glycol)-polyurethane hydrogels as potential biomaterials}, journal = {Polymer International}, volume = {64}, number = {3}, year = {2015}, month = {MAR}, pages = {397-404}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

We report the synthesis of porous poly(ethylene glycol)-polyurethane (PEG-PU) hydrogels using PEG-4000 as a soft segment and 4,4-methylenebis(cyclohexylisocyanate) as a hard segment. The degree of swelling in the hydrogels could be controlled by varying the amount of crosslinking agent, namely 1,2,6-hexanetriol. Structural characterization of the hydrogels was performed using solid-state C-13 NMR and Fourier transform infrared spectroscopy. Wide-angle X-ray diffraction studies revealed the existence of crystalline domains of PEG and small-angle X-ray scattering studies showed the presence of lamellar microstructures. For generating a porous structure in the hydrogels, cryogenic treatment with lyophilization was used. Scanning electron microscopy and three-dimensional micro-computed tomography imaging of the hydrogels indicated the presence of interconnected pores. The mechanical strength of the hydrogels and xerogels was measured using dynamic mechanical analysis. The observed dynamic storage moduli (E) for the equilibrium swollen and dry gels were found to be 0.15 and 4.2 MPa, respectively. Interestingly, the porous PEG-PU xerogel also showed E of 5.6 MPa indicating a similar mechanical strength upon incorporating porosity into the gel matrix. Finally, preliminary cytocompatibility studies showed the ability of cells to proliferate in the hydrogels. These gels show promise for applications as scaffolds and implants in tissue engineering. (c) 2014 Society of Chemical Industry

}, keywords = {hydrogels, permeability, poly(ethylene glycol), polyurethane, porosity}, issn = {0959-8103}, doi = {10.1002/pi.4802}, author = {Divakaran, Anumon V. and Torris, Arun A. T. and Lele, Ashish K. and Badiger, Manohar V.} } @article { ISI:000374873100022, title = {Various types of separation membranes}, journal = {Current Science}, volume = {110}, number = {8}, year = {2016}, month = {APR}, pages = {1426-1438}, publisher = {INDIAN ACAD SCIENCES}, address = {C V RAMAN AVENUE, SADASHIVANAGAR, P B \#8005, BANGALORE 560 080, INDIA}, abstract = {

Membrane-based separation is a superior alternative to conventional processes in many separation problems of practical importance. For maximum effectiveness, both high selectivity and flux are desirable. This article summarizes the global efforts at designing new membrane materials, particularly carbon nanotube (CNT)-based membranes, to achieve the twin objectives mentioned above. Interest in CNT emanates from the excellent transport property of molecules through its frictionless smooth walls, with/without functionalization at the end tips. Permeation of water through graphene oxide (GO) channels, which are otherwise impermeable to solutes, has also generated considerable interest, and GO is being viewed as a promising material for separations. The performances of conducting polymers like polypyrrole, polyaniline, polythiophene-3, 4-ethylenedioxythiophene and their different composites have been studied as a function of changes in morphology and redox behaviour, and this aspect too is covered in the present article. Also, the dependence of the separation performances based on the size, charge and hydrophobic/hydrophilic properties has been discussed in detail. Advances in understanding will have an important bearing on future developments in separation science.

}, keywords = {carbon nanotube, conducting polymers, flux, graphene oxide, permeability, separation membranes}, issn = {0011-3891}, author = {Das, Debasree and Datta, Anindya and Contractor, Aliasgar Qutub} } @article {48353, title = {Addressing challenges in sealing of scalable multifiber module for O-2 enrichment using LSCF membranes}, journal = {International Journal of Applied Ceramic Technology}, volume = {19}, year = {2022}, month = {MAY}, pages = {1561-1571}, type = {Article}, abstract = {

Scalable and multifiber modules in oxygen separation face huge challenges due to difficulty in integrating all the necessary components, especially in sealing the fibers in a gas tight module. Here, we report our findings on design and fabrication of a multifiber La0.6Sr0.4Co0.2Fe0.8O3-delta (LSCF)-based module, which can be scaled up. The focus is on sealing ceramic-metal interfaces by layering of sealants of varying thermal properties. We have also incorporated the use of dead ended fibers to minimize ceramic-metal interfaces in the hot zones and present a new method for dead ending by flame melting. Pressurizing the air inlet feed from either bore side or shell side is detrimental to the structural integrity of the fibers. A thorough characterization of the fresh and spent fibers is also carried out using X-ray tomography and electron microscopy, which indicates effect of temperature and pressure on the fibers.

}, keywords = {Characterization, permeability, Perovskites}, issn = {1546-542X}, doi = {10.1111/ijac.13967}, author = {Jogdand, Shunottara M. and Bedadur, Prachiti R. and Torris, Arun and Agrawal, Ravi and Kharul, Ulhas K. and Devi, R. Nandini} }