@article { ISI:000277581100043, title = {Biocatalytic approach for the utilization of hemicellulose for ethanol production from agricultural residue using thermostable xylanase and thermotolerant yeast}, journal = {Bioresource Technology}, volume = {101}, number = {14}, year = {2010}, month = {JUL}, pages = {5366-5373}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

A hydrolysis of 62\% and 50\% for OSX (Oat spelt xylan) and WBH (Wheat bran hemicellulose) were obtained in 36 h and 48 h using Accellerase(TM) 1000 at 50 degrees C wherein thermostable xylanase from alkalothermophilic Thermomonospora sp. yielded 67\% (OSX) in 3 h and 58\% (WBH) in 24 h at 60 degrees C, favouring a reduction in process time and enzyme dosage. The rate of hydrolysis with thermostable xylanase was increased by 20\% with the addition of nonionic surfactant tween 80 or biosurfactant sophorolipid. The simultaneous saccharification and fermentation (SSF) of OSX and WBH using thermostable xylanase and D. hansenii in batch cultures produced 9.1 g/L and 9.5 g/L of ethanol, respectively and had a shorter overall process time than the separate hydrolysis and fermentation (SHF). The immobilized yeast cells in Ca-alginate matrix produced ethanol with a yield of 0.46 g/g from hemicellulosic hydrolysates and were reused six times with 100\% fermentation efficiency. (C) 2010 Elsevier Ltd. All rights reserved.

}, keywords = {Biosurfactant, Ethanol, Hemicellulose, Thermostable xylanase, Thermotolerant yeast}, issn = {0960-8524}, doi = {10.1016/j.biortech.2010.01.150}, author = {Menon, Vishnu and Prakash, Gyan and Prabhune, Asmita and Rao, Mala} } @article { ISI:000280972500010, title = {Enzymatic hydrolysis and ethanol production using xyloglucanase and debaromyces hansenii from tamarind kernel powder: galactoxyloglucan predominant hemicellulose}, journal = {Journal of Biotechnology}, volume = {148}, number = {4}, year = {2010}, month = {AUG}, pages = {233-239}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The hydrolysis and ethanol production from tamarind kernel powder (TKP), a rich source of galactoxyloglucan (GXG) was investigated for the first time using xyloglucanase and thermotolerant Debaromyces hansenii. The acid hydrolysis of TKP with 2N H(2)SO(4) at 120 degrees C for 30 min yielded an overall saccharification of 94\% based on the total available carbohydrate content and further fermentation at 40 degrees C with thermotolerant D hansenii produced an ethanol yield of 0.35 g/g. A maximum hydrolysis of 55 and 78\% for GXG was obtained in 48 h at 50 degrees C using Thermomonospora xyloglucanase (TXy) and accellerase (TM) 1000, respectively. The synergistic effect of beta-galactosidase and xyloglucanase was demonstrated by the exogenous addition of beta-galactosidase to TXy which improved the overall hydrolysis of GXG by 30\%. The rate of hydrolysis of GXG with TXy and accellerase was increased by 15-20\% in the presence of chemical surfactants (tween 80 and toluene) or protein additive (BSA). The fermentation of enzymatic hydrolysates of GXG by TXy and accellerase with free cells at 40 degrees C produced an ethanol yield of 0.39 and 0.41 g/g whereas with immobilized cells produced 0.45 and 0.43 g/g, respectively, with a theoretical conversion efficiencies of 78-88\%. The immobilized yeast cells were reused six times at 40 degrees C with 100\% fermentation efficiency. (C) 2010 Elsevier B.V. All rights reserved.

}, keywords = {Ethanol, Galactoxyloglucan, Hydrolysis, Tamarind kernel powder, Thermotolerant yeast, Xyloglucanase}, issn = {0168-1656}, doi = {10.1016/j.jbiotec.2010.06.004}, author = {Menon, Vishnu and Prakash, Gyan and Rao, Mala} } @article { ISI:000276957700010, title = {Synthesis of ethyl acetate by esterification of acetic acid with ethanol over a heteropolyacid on montmorillonite K10}, journal = {Journal of Natural Gas Chemistry}, volume = {19}, number = {2}, year = {2010}, month = {MAR}, pages = {161-164}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

In present work, liquid phase esterification of acetic acid with ethanol over dodecatungestophosphoric acid (DTPA) supported on K10 mommorillonite was systematically studied and optimization of process parameters was carried out The 20\% m/m urpAtK tO was found to be the optimum catalyst with 90\% acetic acid conversion and 100\% ethyl acetate selectivity The study was also explored to see the feasibility of 20\% m/m DTPA/K10 as a catalyst for the alkylation of acetic acid with other alcohols like methanol, iso-propanol and sr-butanol. The 20\% m/m DTPA/K10 has shown increased activity with the increase in carbon number, at the same alcohol reflux The results are novel

}, keywords = {Acetic acid, Ethanol, ethyl acetate, Heteropolyacid, montmorillonite K10}, issn = {1003-9953}, doi = {10.1016/S1003-9953(09)60048-7}, author = {Gurav, Hanumant and Bokade, Vijay V.} } @article { ISI:000287428900016, title = {Bioethanol production from renewable polymer lichenan using lichenase from an alkalothermophilic thermomonospora sp and thermotolerant yeast}, journal = {Fuel Processing Technology}, volume = {92}, number = {3}, year = {2011}, month = {MAR}, pages = {401-406}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Biomass feedstocks available decentrally will be more commodious for localized biorefinery approach than the exhaustive large scale and centralized plants driven by cost intensive technology. Lichen is present in a wide range of habitats in a distributed manner. A maximum hydrolysis of 73\%-76\% for lichenan from Cetraria islandica, Usnea barbata and Parmelia sp. were obtained in 24 h using lichenase from an alkalothermophilic Thermomonospora sp. wherein the hydrolysis was 100\% with commercial enzyme Accellerase (TM) 1000. The synergistic role of beta-glucosidase in lichenan hydrolysis was demonstrated by the exogenous addition of beta-glucosidase to Thermomonospora lichenase which resulted in complete hydrolysis. The hydrolysates of lichenan obtained using Accellerase or a cocktail of Thermomonospora lichenase and beta-glucosidase when fermented with free cells of Saccharomyces at 40 degrees C produced an ethanol yield of 0.45 g/g-0.48 g/g with theoretical conversion efficiencies of 93\%-96\%. The Ca-alginate immobilized yeast cells were reused eight times at 40 degrees C with 100\% fermentation efficiency. (C) 2010 Elsevier B.V. All rights reserved.

}, keywords = {Ethanol, Hydrolysis, Lichenan, Lichenase, Synergism, Thermotolerant yeast}, issn = {0378-3820}, doi = {10.1016/j.fuproc.2010.10.001}, author = {Menon, Vishnu and Divate, Rupesh and Rao, Mala} } @article { ISI:000288356300002, title = {Development of biocatalysts for production of commodity chemicals from lignocellulosic biomass}, journal = {Bioresource Technology}, volume = {102}, number = {6}, year = {2011}, month = {MAR}, pages = {4304-4312}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

Lignocellulosic biomass is recognized as potential sustainable source for production of power, biofuels and variety of commodity chemicals which would potentially add economic value to biomass. Recalcitrance nature of biomass is largely responsible for the high cost of its conversion. Therefore, it is necessary to introduce some cost effective pretreatment processes to make the biomass polysaccharides easily amenable to enzymatic attack to release mixed fermentable sugars. Advancement in systemic biology can provide new tools for the development of such biocatalysts for sustainable production of commodity chemicals from biomass. Integration of functional genomics and system biology approaches may generate efficient microbial systems with new metabolic routes for production of commodity chemicals. This paper provides an overview of the challenges that are faced by the processes converting lignocellulosic biomass to commodity chemicals. The critical factors involved in engineering new microbial biocatalysts are also discussed with more emphasis on commodity chemicals. (C) 2011 Elsevier Ltd. All rights reserved.

}, keywords = {Biomass utilization, Commodity chemicals, Ethanol, Lactic acid, Microbial cellulases}, issn = {0960-8524}, doi = {10.1016/j.biortech.2011.01.002}, author = {Adsul, Mukund G. and Singhvi, M. S. and Gaikaiwari, Shalaka A. and Gokhale, D. V.} } @article { ISI:000319545800013, title = {Approach towards biocatalytic valorisation of barley beta-glucan for bioethanol production using 1,3-1,4 beta-glucanase and thermotolerant yeast}, journal = {International Biodeterioration \& Biodegradation}, volume = {82}, year = {2013}, month = {AUG}, pages = {81-86}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

The exploitation of renewable resource containing polymers other than cellulose and hemicellulose are critically important for the feasibility of biofuel production. The potential of 1,3-1,4 glucan 4-gluconohydrolyase mediated saccharification of barley beta-glucan (BG) was investigated for ethanol production using thermotolerant Saccharomyces sp. A maximum hydrolysis of 71\% was obtained in 24 h using in-house produced 1,3-1,4 beta-glucanase from an alkalothermophilic Thermomonospora sp. whereas the hydrolysis was 100\% with Accellerase (TM) 1000. The synergistic effect of beta-glucosidase and 1,3-1,4 beta-glucanase was demonstrated by the exogenous addition of beta-glucosidase to Thermomonospora 1,3-1,4 beta-glucanase which resulted in complete hydrolysis of BG. The hydrolysates of BG obtained using Accellerase or a cocktail of Thermomonospora 1,3-1,4 beta-glucanase and beta-glucosidase when fermented with free cells of Saccharomyces at 40 degrees C produced an ethanol yield of 0.44 g g(-1) and 0.46 g g(-1) respectively and when fermented with immobilized cells produced a yield of 0.49 g g(-1). The Ca-alginate immobilized yeast cells were reused nine times at 40 degrees C with 100\% fermentation efficiency. The economics of barley-to-fuel ethanol program will ameliorate if in addition to barley starch, beta-glucan is also utilized. (c) 2013 Elsevier Ltd. All rights reserved.

}, keywords = {1, 3-1, 4 Glucan 4-gluconohydrolyase, Barley beta-glucan, Ethanol, Hydrolysis, Synergism, Thermotolerant yeast}, issn = {0964-8305}, doi = {10.1016/j.ibiod.2013.03.002}, author = {Divate, Rupesh and Menon, Vishnu and Rao, Mala} } @article { ISI:000314692400006, title = {Evaluation of ethanol production by a new isolate of yeast during fermentation in synthetic medium and sugarcane bagasse hemicellulosic hydrolysate}, journal = {Annals of Microbiology}, volume = {63}, number = {1}, year = {2013}, month = {MAR}, pages = {63-70}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

A new xylose fermenting yeast was isolated from over-ripe banana by enrichment in xylose-containing medium. The phylogenetic analysis of ITS1-5.8S-ITS2 region sequences of ribosomal RNA of isolate BY2 revealed that it shows affiliation to genus Pichia and clades with Pichia caribbica. In batch fermentation, Pichia strain BY2 fermented xylose, producing 15 g l(-1) ethanol from 30 g l(-1) xylose under shaking conditions at 28A degrees C, with ethanol yield of 0.5 g g(-1) and volumetric productivity of 0.31 g l(-1) h(-1). The optimum pH range for ethanol production from xylose by Pichia strain BY2 was 5-7. Pichia strain BY2 also produced 6.08 g l(-1) ethanol from 30 g l(-1) arabinose. Pichia strain BY2 can utilize sugarcane bagasse hemicellulose acid hydrolysate for alcohol production, efficiency of fermentation was improved by neutralization, and sequential use of activated charcoal adsorption method. Percent total sugar utilized and ethanol yield for the untreated hydrolysate was 17.14\% w/v and 0.33 g g(-1), respectively, compared with 66.79\% w/v and 0.45 g g(-1), respectively, for treated hemicellulose acid hydrolysate. This new yeast isolate showed ethanol yield of 0.45 g g(-1) and volumetric productivity of 0.33 g l(-1) h(-1) from sugarcane bagasse hemicellulose hydrolysate detoxified by neutralization and activated charcoal treatment, and has potential application in practical process of ethanol production from lignocellulosic hydrolysate.

}, keywords = {D-xylose, Ethanol, Pichia, Sugarcane bagasse hemicellulose}, issn = {1590-4261}, doi = {10.1007/s13213-012-0445-4}, author = {Hande, Aparna and Mahajan, Siddharth A. and Prabhune, Asmita} } @article { ISI:000348753400054, title = {Highly loaded well dispersed stable Ni species in NiXMg2AlOY nanocomposites: application to hydrogen production from bioethanol}, journal = {Applied Catalysis B-Environmental}, volume = {166}, year = {2015}, month = {MAY}, pages = {485-496}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Inexpensive NiXMg2AlOY nanocomposites with high Ni content (Ni wt\% \> 40\%) are developed as efficient catalysts for the sustainable hydrogen production from a mixture of ethanol and water at low temperature. The NiXMg2AlOY nanocomposites are composed of small and uniform nanoparticles (4-6 nm) of NiO, Ni-Mg-(Al)-O and/or MgO. The strong interactions existing between Ni2+ cations and Mg2+ and/or Al3+ cations either in the Ni-Mg-(Al)-O solid solution and/or at the interface of nanoparticles of NiO and/or Ni-Mg-(Al)-O make the catalyst highly active and stable. The behavior of the solids is analyzed in the presence of low and high concentrations of ethanol while maintaining a H2O/EtOH molar ratio of 3. The NiXMg2AlOY catalysts are shown to be efficient toward H-2 production between 250 and 650 degrees C. In the presence of low concentration of ethanol, on the highly loaded Ni compound (Ni12Mg2AlOY), total conversion of ethanol is obtained at 250 degrees C without formation of CO and carbon, and at 300 degrees C a H-2 yield of 3 mol moletEtOH(-1) is obtained without the formation of CO, exhibiting a remarkable stability with the time on stream even if some carbon is formed. In high concentration of ethanol, total conversion of ethanol is obtained at 450 degrees C on the highly loaded Ni compound (Ni12Mg2AlOY). In such conditions, a stable co-generation of carbon nanofibrous materials which amount increases with Ni content is also obtained. The catalytic stability is related to the type and morphology of the carbon species formed. The correlations among the catalyst properties, the catalytic performances and the characterizations are thoroughly discussed. (C) 2014 Elsevier B.V. All rights reserved.

}, keywords = {Ethanol, Hydrogen, Nanofibrous carbon, nickel oxide, Steam reforming}, issn = {0926-3373}, doi = {10.1016/j.apcatb.2014.11.052}, author = {Fang, Wenhao and Paul, Sebastien and Capron, Mickael and Biradar, Ankush V. and Shubhangi B. Umbarkar and Dongare, Mohan K. and Dumeignil, Franck and Jalowiecki-Duhamel, Louise} } @article {46098, title = {Use of Plackett-Burman design for enhanced phytase production by Williopsis saturnus NCIM 3298 for applications in animal feed and ethanol production}, journal = {3 Biotech}, volume = {9}, year = {2019}, month = {JUN}, pages = {237}, type = {Article}, abstract = {

Distiller-dried grain solid (DDGS), a co-product of alcohol production, contains cereal grain residues, proteins, and yeast metabolites, which make it suitable in poultry feeding. However, high phytate content of DDGS limits its applicability in poultry feed. In this study, Plackett-Burman design was used to improve cell-bound phytase production by Williopsis saturnus NCIM 3298, and we achieved an enzyme activity of 269IU/g of dry-wet biomass. The effect of this enhanced phytase-displaying yeast strain on hydrolysis of corn phytate and subsequently on ethanol production and DDGS quality was then investigated. Results of saccharification in the presence of phytase showed that reducing sugar content of liquefied mash increased by 11\%, which subsequently improved the ethanol production by 18\% (w/v) (p\<0.01) compared with the control. Notably, phytase treatment decreased the phytate content of corn by 70\% (p\<0.01) compared with the control, thereby improving the availability of free phosphate in fermentation broth and DDGS. Thus, the results obtained suggest that the addition of W. saturnus NCIM 3298 strain has the potential of providing a new source of phytase that would be useful in the feed and ethanol industries.

}, keywords = {DDGS, Ethanol, Phytase, Plackett-Burman Design, Williopsis saturnus NCIM 3298}, issn = {2190-572X}, doi = {10.1007/s13205-019-1764-y}, author = {Pable, Anupama A. and Shah, Sarah and Kumar, V. Ravi and Khire, Jayant M.} } @article {47352, title = {Effect of CaCl2 and ZnCl2 salts on isobaric vapor-liquid equilibrium in separation of the azeotropic mixture of ethanol plus water}, journal = {Fluid Phase Equilibria}, volume = {537}, year = {2021}, month = {JUN }, pages = {113000}, type = {Article}, abstract = {

Present work analyzes potential of calcium chloride (CaCl2) and zinc chloride (ZaCl(2)) salts as entrainer for breaking the minimum boiling azeotrope of ethanol and water. Isobaric vapor-liquid equilibrium (VLE) data for the binary systems of water + ethanol and ternary system of water + ethanol + calcium chloride, and water + ethanol + zinc chloride were measured at a constant pressure of 94.5 kPa. The effect of salts on the relative volatility of ethanol to water as well as on the vapor phase mole fractions of ethanol were also studied experimentally. From the experimental results, it is observed that with addition of salts, the azeotropic point of the ethanol and water system can be eliminated. Salting out effects in case of calcium chloride was more than that zinc chloride salt. The results obtained in this work showed that calcium chloride could be a better choice for separation of the water + ethanol azeotrope. Electrolyte nonrandom two-liquid (eNRTL) model was used to correlate the experimental VLE data. The model prediction with the regressed parameters was found in well agreement with the experimental data. The experimental data obtained in this work was found thermodynamically consistent using van Ness test. (C) 2021 Elsevier B.V. All rights reserved.

}, keywords = {Azeotrope, eNRTL, Ethanol, salts, Vapor-liquid equilibrium, Water}, issn = {0378-3812}, doi = {10.1016/j.fluid.2021.113000}, author = {Ghuge, Pravin D. and Mali, Nilesh A. and Joshi, Sunil S.} } @article {48450, title = {Intrinsic charge polarization in Bi19S27Cl3 nanorods promotes selective C-C coupling reaction during photoreduction of CO2 to ethanol}, journal = {Advanced Materials}, volume = {35}, year = {2023}, month = {FEB}, type = {Article}, abstract = {

Obtaining multi-carbon products via CO2 photoreduction is a major catalytic challenge involving multielectron-mediated C-C bond formation. Complex design of multicomponent interfaces that are exploited to achieve this chemical transformation, often leads to untraceable deleterious changes in the interfacial chemical environment affecting CO2 conversion efficiency and product selectivity. Alternatively, robust metal centers having asymmetric charge distribution can effectuate C-C coupling reaction through the stabilization of intermediates, for desired product selectivity. However, generating inherent charge distribution in a single component catalyst is a difficult material design challenge. Here, a novel photocatalyst, Bi19S27Cl3, is presented which selectively converts CO2 to a C-2 product, ethanol, in high yield under visible light irradiation. Structural analysis through transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and X-ray absorption spectroscopy reveals the presence of charge polarized bismuth centers in Bi19S27Cl3. The intrinsic electric field induced by charge polarized bismuth centers renders better separation efficiency of photogenerated electron-hole pair. Furthermore, charge polarized centers yield better adsorption of CO* intermediate and accelerate the rate determining C-C coupling step through the formation of OCCOH intermediate. Formation of these intermediates is experimentally mapped by in situ Fourier-transform infrared spectroscopy and further confirmed by theoretical calculation.

}, keywords = {C-C coupling, charge polarization, CO2 reduction, Ethanol, Photocatalysis}, issn = {0935-9648}, doi = {10.1002/adma.202205994}, author = {Das, Kousik and Das, Risov and Riyaz, Mohd and Parui, Arko and Bagchi, Debabrata and Singh, Ashutosh Kumar and Singh, Abhishek Kumar and Vinod, Chathakudath P. and Peter, Sebastian C.} } @article {49587, title = {Deciphering the intricate mechanisms behind the selective oxidation of methane to C1 and C2 oxygenates over FeAu/γ-Al2O3 catalysts}, journal = {Chemical Engineering Journal}, volume = {512}, year = {2025}, month = {MAY}, pages = {162510}, type = {Article}, abstract = {

In this work, we demonstrate an eco-benign synthesis protocol for preparing gold nanoparticles and the role of the strong interaction between gold nanoparticles and iron oxide in FeAu/gamma-Al2O3 catalysts that render it an anionic (Au delta-) character while tailoring them in a smaller size. The multifunctional FeAu/gamma-Al2O3 catalyst selectively produces ethanol (95 \% selectivity, similar to 240 mu mol(-1) cat) at a mild temperature of 75 degrees C without the addition of co-reactants during liquid phase methane oxidation with molecular oxygen. Conversely, Au/gamma-Al2O3 and Fe/gamma-Al2O3 catalysts exhibited high selectivity for CH3OH and HCHO. A high dispersion accompanied by strong electronic interaction between the Au delta{\textendash}FeOx, as corroborated by diverse techniques, enables methane activation across the interface and coupling on the gold nanoparticles, which are responsible for the markedly improved formation of ethanol. Furthermore, in situ DRIFTS studies and DFT investigations point to a reaction mechanism of coupling of CH2OH and CH3 intermediates as the most likely route for ethanol formation.

}, keywords = {Anionic gold catalysts, Au-FeOx synergism, C-H bond activation, Ethanol, Methane oxidation, Methanol}, issn = {1385-8947}, doi = {10.1016/j.cej.2025.162510}, author = {Prabu, Marimuthu and Manikandan, Marimuthu and Rengam, B. Sathya Sai and Ramakrishnan, Archana and Raja, Abhishekram and Urkude, Rajashri R. and Ghosh, Biplab and Varghese, Jithin John and Raja, Thirumalaiswamy} }