@article { ISI:000344791100009, title = {Metallic few-layer flowerlike VS2 nanosheets as field emitters}, journal = {European Journal of Inorganic Chemistry}, number = {31}, year = {2014}, month = {NOV}, pages = {5331-5336}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

We report first-principles DFT calculations of the single-layer VS2 work function, the experimental synthesis of flower-like few-layer-thick VS2 nanosheets by a simple one-step hydrothermal method, and the investigation of their field emission properties. The turn-on field required to draw emission current densities of 1 and 10 mu A/cm(2) were 4 and 5.01 V/mu m, respectively. The observed turn-on field values are attributed to the high field enhancement factor (ca. 2500), which is due to presence of sharp protrusions in the VS2 nanosheets. Furthermore, the field-emission current stability of the VS2 emitter shows stable behavior over a period of 12 h. Further, DFT calculations show that the work function (f) of the single-layer VS2 emitter is 6.01 eV.

}, keywords = {Density functional calculations, field emission, Layered compounds, Nanostructures, Sulfur, Vanadium}, issn = {1434-1948}, doi = {10.1002/ejic.201402448}, author = {Rout, Chandra Sekhar and Khare, Ruchita T. and Kashid, Ranjit V. and Joag, Dilip S. and More, Mahendra A. and Lanzillo, Nicholas A. and Washington, Morris and Nayak, Saroj K. and Late, Dattatray J.} } @article { ISI:000342328300031, title = {Pulsed laser-deposited MoS2 thin films on W and Si: field emission and photoresponse studies}, journal = {ACS Applied Materials \& Interfaces}, volume = {6}, number = {18}, year = {2014}, month = {SEP}, pages = {15881-15888}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

We report field electron emission investigations on pulsed laser-deposited molybdenum disulfide (MoS2) thin films on W-tip and Si substrates. In both cases, under the chosen growth conditions, the dry process of pulsed laser deposition (PLD) is seen to render a dense nanostructured morphology of MoS2, which is important for local electric field enhancement in field emission application. In the case of the MoS2 film on silicon (Si), the turn-on field required to draw an emission current density of 10 mu A/cm(2) is found to be 2.8 V/mu m. Interestingly, the MoS2 film on a tungsten (W) tip emitter delivers a large emission current density of similar to 30 mA/cm(2) at a relatively lower applied voltage of similar to 3.8 kV. Thus, the PLD-MoS2 can be utilized for various field emission-based applications. We also report our results of photodiode-like behavior in (n- and p- type) Si/PLDMoS2 heterostructures. Finally we show that MoS2 films deposited on flexible kapton substrate show a good photoresponse and recovery. Our investigations thus hold great promise for the development of PLD MoS2 films in application domains such as field emitters and heterostructures for novel nanoelectronic devices.

}, keywords = {field emission, MoS2, photodiode heterostructures, pulsed laser deposition, thin film}, issn = {1944-8244}, doi = {10.1021/am503464h}, author = {Late, Dattatray J. and Shaikh, Parvez A. and Khare, Ruchita T. and Kashid, Ranjit V. and Chaudhary, Minakshi V. and More, Mahendra A. and Ogale, Satishchandra B.} } @article { ISI:000370057200011, title = {Enhanced electron field emission from NiCo2O4 nanosheet arrays}, journal = {Materials Research Express}, volume = {2}, number = {9}, year = {2015}, month = {SEP}, pages = {095011}, publisher = {IOP PUBLISHING LTD}, address = {TEMPLE CIRCUS, TEMPLE WAY, BRISTOL BS1 6BE, ENGLAND}, abstract = {

Electron emission properties of electrodeposited spinel NiCo2O4 nanosheet arrays grown on Ni foam have been studied. The work function of NiCo2O4 was calculated by density functional theory using the plane-wave basis set and used to estimate the field enhancement factor. The NiCo2O4 nanosheet arrays exhibited a low turn-on field of 1.86 V mu m(-1) at 1 mu A cm(-2) and current density of 686 mu A cm(-2) at 3.2 V mu m(-1), with field enhancement factor beta = 1460 and good field emission current stability. The field emission properties of the NiCo2O4 nanosheet arrays showed enhanced performance compared to chemically prepared NiCo2O4 nanosheets. Hence, the nanosheet arrays have great potential as robust high performance vertical structure electron emitters for future flat panel displays and vacuum electronic device applications.

}, keywords = {Density functional theory, field emission, nanosheets, NiCo2O4, spinel}, issn = {2053-1591}, doi = {10.1088/2053-1591/2/9/095011}, author = {Naik, Kusha Kumar and Khare, Ruchita T. and Gelamo, Rogerio V. and More, Mahendra A. and Thapa, Ranjit and Late, Dattatray J. and Rout, Chandra Sekhar} } @article {48342, title = {Titanium trisulfide nanosheets and nanoribbons for field emission- based nanodevices}, journal = {ACS Applied Nano Materials}, volume = {6}, year = {2023}, month = {JAN}, pages = {44-49}, type = {Article}, abstract = {

The field emission (FE) properties of TiS3 nanosheets and nanoribbons, synthesized by direct sulfuration of bulk titanium, are investigated. The nanosheets show an enhanced FE behavior with a low turn-on field of similar to 0.3 V/ mu m, required for drawing an emission current density of similar to 10 mu A/cm2. Interestingly, the TiS3 nanosheet emitter delivered a large emission current density of similar to 0.9 mA/ cm2 at a relatively low applied electric field of similar to 0.4 V/mu m. We have estimated the values of the field enhancement factor (beta), which are found to be similar to 5 x 104 for the TiS3 nanosheet emitter and similar to 4 x 103 for the nanoribbon emitter. We attribute the superior FE performance to the presence of atomically sharp edges and the reduced thickness of TiS3, as reflected in the high value of beta. In fact, the nanosheet sample presents a higher density of ultrathin layers (similar to 12 nm-thick), and thus, they have a larger edge to volume ratio than the nanoribbon samples (which are similar to 19 nm-thick). The superior FE behavior of TiS3 nanosheets over nanoribbons makes them a propitious field emitter and can be utilized for various FE-based applications, demanding large emission currents and lower operational voltages. Moreover, the FE current stability recorded on these samples confirms their promising performance. Thus, the present investigation brings out a great promise of TiS3 nanosheets and nanoribbons as field emitters for vacuum nanoelectronics devices.

}, keywords = {Current stability, field emission, nanoribbon, nanosheets, TiS3}, doi = {10.1021/acsanm.2c03460}, author = {Pawbake, Amit S. and Khare, Ruchita T. and Island, Joshua O. and Flores, Eduardo and Ares, Jose R. and Sanchez, Carlos and Ferrer, Isabel J. and Pawar, Mahendra and Frank, Otakar and More, Mahendra A. and van der Zant, Herre S. J. and Castellanos-Gomez, Andres and Late, Dattatray J.} }