@article { ISI:000228625600003, title = {Corrosion protective poly(o-toluldine) coatings on copper}, journal = {Corrosion Science}, volume = {47}, number = {6}, year = {2005}, month = {JUN}, pages = {1352-1369}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

This study examines the use of poly(o-toulidine) (POT) coatings for corrosion protection of copper (Cu) in an aqueous solution of 3\% NaCl. The POT coatings were synthesized on Cu substrates under cyclic voltammetric conditions from an aqueous solution of sodium oxalate. The resulting, POT coatings were uniform, shiny and strongly adherent to the Cu substrates. These coatings were characterized by cyclic voltammetry (CV), UV-visible absorption spectroscopy, Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). The ability of POT to serve as a corrosion protective coating for Cu was examined by potentiodynamic polarization measurements and CV. The results of this study clearly reveal that the POT acts as corrosion protective coating on Cu and reduces the corrosion rate of Cu almost by a factor of 40. (c) 2004 Elsevier Ltd. All rights reserved.

}, keywords = {Conducting polymer coatings, Copper, Corrosion resistant coatings, cyclic voltammetry, poly(o-toluidine) coatings}, issn = {0010-938X}, doi = {10.1016/j.corsci.2004.07.041}, author = {Shinde, V. and Sainkar, S. R. and Patil, P. P.} } @article { ISI:000227823500012, title = {Electrochemical synthesis and corrosion protection properties of poly(o-toluidine) coatings on low carbon steel}, journal = {Journal of Applied Polymer Science}, volume = {96}, number = {3}, year = {2005}, month = {MAY}, pages = {685-695}, publisher = {JOHN WILEY \& SONS INC}, type = {Article}, address = {111 RIVER ST, HOBOKEN, NJ 07030 USA}, abstract = {

Uniform and strongly adherent poly(o-toluidine) (POT) coatings have been synthesized on low carbon steel (LCS) substrates by electrochemical polymerization (ECP) of o-toluidine under cyclic voltammetric conditions from an aqueous sodium tartrate solution. Cyclic voltammetry (CV), UV-visible absorption spectroscopy, Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) measurements, and scanning electron microscopy (SEM) were used to characterize these coatings, which indicates that the sodium tartrate is a suitable medium for the ECP of o-toluidine and it occurs without noticeable dissolution of LCS. Corrosion protection properties of the POT coatings were evaluated in aqueous 3\% NaCl by the potentiodynamic polarization measurements and CV. The result of the potentiodynamic polarization demonstrates that the POT coating has ability to protect the LCS against corrosion. The corrosion potential was about 334 mV more positive in aqueous 3\% NaCl for the POT-coated LCS than that of bare LCS and reduces the corrosion rate of LCS almost by a factor of 50. (c) 2005 Wiley Periodicals, Inc.

}, keywords = {conducting polymers, Corrosion resistant coatings, cyclic voltarnmetry, Electrochemical polymerization, FT-IR, Poly(o-toluidine), UV-vis spectroscopy}, issn = {0021-8995}, doi = {10.1002/app.21497}, author = {Shinde, V. and Sainkar, S. R. and Patil, P. P.} } @article { ISI:000236590300058, title = {Poly(o-toluidine) coatings on copper: electrochemical synthesis from aqueous media}, journal = {Surface \& Coating Technology}, volume = {200}, number = {16-17}, year = {2006}, month = {APR}, pages = {5094-5101}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Poly(o-toluidine) (POT) coatings were synthesized on copper (Cu) by electrochemical polymerization of o-toluidine using aqueous sodium oxalate solution as supporting electrolyte. The resulting coatings were uniform, compact and strongly adherent to the Cu substrate. These coatings were characterized by using cyclic voltammetry, UV-visible absorption spectroscopy, Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD) measurements and X-ray photoelectron spectroscopy (XPS). The results of these studies reveal that the sodium oxalate is suitable supporting electrolyte for the electrochemical polymerization of o-toluidine on Cu substrate. It is found that the electrochemical polymerization of o-toluidine takes place after the passivation of the Cu substrate via formation of copper oxalate (CuC2O4, H2O) layer, which is confirmed by XRD and XPS. The optical absorption spectroscopy study reveals the exclusive formation of the pernigraniline base (PB) form of POT. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {Conducting polymer coatings, Copper, Corrosion resistant coatings, cyclic voltammetry, poly(o-toluidine) coatings}, issn = {0257-8972}, doi = {10.1016/j.surfcoat.2005.05.026}, author = {Shinde, V. and Mandale, A. B. and Patil, K. R. and Gaikwad, A. B. and Patil, P. P.} }