@article { ISI:000240521800008, title = {Adsorption of methanol on Si(100)/SiO(2)and mesoporous SBA-15}, journal = {Colloids and Surfaces A-Physicochemical and Engineering Aspects}, volume = {287}, number = {1-3}, year = {2006}, month = {SEP}, pages = {51-58}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Adsorption of methanol on SiO(100)/SiO2 substrate and mesoporous SBA-15 has been studied by using Fourier transform infrared (FTIR) and X-ray photoelectron spectroscopy (XPS). Contact angle technique is employed to study the adsorption kinetics of methanol on SiO(100)/SiO2 and thermal stability of adlayer. Thermogravimetric (TGA) technique is used to understand the thermal behavior of methanol layer on SBA-15. Adsorption kinetics fit fairly well with Langmuir isotherms giving adsorption rate constant, k(a) = 0.0021 W s(-1). FTIR results show formation of methoxy silicon (SiOCHA silicon polyhydride (SiH2), carboxylate, molecular water and hydroxyl groups on Si(100)/SiO2 surface and only methoxy silicon on SBA-15. XPS results confirm methanol adsorption and support FTIR results. The methanol adlayers are found to be thermally stable up to a temperature of similar to 262 degrees C on both Si(100)/SiO2 and SBA-15 and decompose between 262 and 450 degrees C. (c) 2006 Elsevier B.V. All rights reserved.

}, keywords = {Adsorption, desorption, kinetics, Methanol, SBA-15, Si(100)/SiO2, thermal stability}, issn = {0927-7757}, doi = {10.1016/j.colsurfa.2006.03.021}, author = {Mirji, S. A. and Halligudi, Shivaraj B. and Mathew, Nevin T. and Ravi, V. and Jacob, Nalini E. and Patil, K. R.} } @article { ISI:000237835100010, title = {Adsorption of octadecyltrichlorosilane on mesoporous SBA-15}, journal = {Applied Surface Science}, volume = {252}, number = {12}, year = {2006}, month = {APR}, pages = {4097-4103}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Adsorption of octadecyltrichlorosilane (OTS) on mesoporous SBA-15 has been studied by using Brunauer-Emmett-Teller (BET) surface area analysis, scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDAX), Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS) and thermo-gravimetric analysis (TGA) techniques. BET surface area analysis shows decrease of surface area from 930 to 416 m(2)/g after OTS adsorption. SEM pictures show close attachment of SBA-15 particles. EDAX measurements show increase of carbon weight percentage and decrease of oxygen and silicon weight percentage. XPS results closely support EDAX analysis. FTIR spectra shows presence of methyl (-CH3) and methylene (-CH2) bands and oriented OTS monolayer on SBA-15. Thermo-gravimetric analysis shows that the OTS adsorbed on SBA-15 are stable up to a temperature of 230 degrees C and that the OTS monolayers decompose between 230 and 400 degrees C. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {Adsorption, OTS, SBA-15, Self-assembly, thermal stability}, issn = {0169-4332}, doi = {10.1016/j.apsusc.2005.06.009}, author = {Mirji, S. A. and Halligudi, Shivaraj B. and Sawant, Dhanashri P. and Jacob, Nalini E. and Patil, K. R. and Gaikwad, A. B. and Pradhan, S. D.} } @article { ISI:000242511300022, title = {Adsorption of methanol on mesoporous SBA-15}, journal = {Materials Letter}, volume = {61}, number = {1}, year = {2007}, month = {JAN}, pages = {88-92}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The adsorption of methanol onmesoporous SBA-15 has been studiedbyrising Brunauer-Emmett-Teller (BET) surface area analysis, scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, X-ray photoclectrom spectroscopy (XPS) and tbennogravimettic analysis (TGA). The BET surface area analysis shows decreases of the surface area from 387 to 383 m(2)/g, pore volume from 0.88 to 0.81 cm(3)/g and pore diameter from 9.07 to 8.4 mm after methanol adsorption. The appearance of strong IR bands at 2862 and 2964cm(-1) due to methyl (-CH3) symmetric and asymmetric stretching demonstrate the presence of methanol and evidence of successful methanol adsorption. XPS results show increase of carbon and oxygen content on the surface of SBA-15. Thermogravirriettic analysis shows that the methanol adsorbed on SBA-15 is stable up to a temperature of 265 degrees C and that the methanol adlayers decompose between 265 and 588 degrees C. (c) 2006 Elsevier B.V. All rights reserved.

}, keywords = {Adsorption, Electron microscopy, Methanol, SBA-15, Surfaces, thermal stability}, issn = {0167-577X}, doi = {10.1016/j.matlet.2006.04.012}, author = {Mirji, S. A. and Halligudi, Shivaraj B. and Mathew, Nevin T. and Jacob, Nalini E. and Patil, K. R. and Gaikwad, A. B.} }