@article { ISI:000230823200014, title = {Growth of PbS nanopyramidal particulate films for potential applications in quantum-dot photovoltaics and nanoantennas}, journal = {Materials Research Bulletin }, volume = {40}, number = {8}, year = {2005}, month = {AUG}, pages = {1353-1360}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

We report a simple interfacial process called the liquid-liquid interface reaction technique (LLIRT) that leads to the formation of nanosized PbS particulate films with hitherto unreported pyramidal morphology. The resultant PbS films were characterized by transmission electron microscopy (TEM) with selected area electron diffraction (SAED), X-ray diffractometery (XRD), atomic force microscopy (AFM), near field scanning optical microscopy (NSOM) and UV-vis spectroscopy. The pyramidal morphology is speculated to originate from the preferred orientation of the 2 2 0 plane of cubic PbS. Our nanopyramidal PbS particulate films display remarkably sharp excitonic peak centered around 656 nm that accounts for a band gap of 1.8 eV suggesting, in turn, their potential application in QD photovoltaics. Interestingly, the feasibility of such nanopyramids to potentially act as nanoantennas (as revealed by the NSOM) is also suggested. (c) 2005 Elsevier Ltd. All rights reserved.

}, keywords = {Atomic force microscopy, Chemical synthesis, Electron microscopy, Nanostructures, Optical properties}, issn = {0025-5408}, doi = {10.1016/j.materresbull.2005.04.018}, author = {Hawaldar, Ranjit R. and Mulik, Uttam P. and Patil, K. and Pasricha, R. and Sathaye, S. and Lewis, A. and Amalnerkar, Dinesh P.} } @article { ISI:000228797100048, title = {Preparation of ferroelectric BaNb2O6 the urea method}, journal = {Materials Letters}, volume = {59}, number = {14-15}, year = {2005}, month = {JUN}, pages = {1929-1931}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

A precipitate was formed when an aqueous solution of BaCl2, NbF5 and urea in required ratio (the ratio of total metal cations to the urea is five) is heated on a water bath at 100 degrees C. This precipitate on decomposition at 600 degrees C yielded the nanocrystallites of BaNb2O6 (BN), as confirmed by X-ray diffraction study (XRD). This is a much lower temperature as compared to that prepared by traditional solid state method (1000 degrees C) as reported for the formation of BaNb2O6. Transmission electron microscope (TEM) investigations revealed that the average particle size is 85 nm for the calcined powders. The room temperature dielectric constant at 1 kHz is found to be 900. The ferroelectric hysteresis loop parameters of these samples were also studied. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {Ceramics, Chemical synthesis, electronic material, ferroelectricity, Oxides}, issn = {0167-577X}, doi = {10.1016/j.matlet.2005.02.028}, author = {Dhage, S. R. and Pasricha, R. and Ravi, V.} } @article { ISI:000231605600022, title = {Silver nanoparticles of variable morphology synthesized in aqueous foams as novel templates}, journal = {Bulletin of Materials Science}, volume = {28}, number = {5}, year = {2005}, month = {AUG}, pages = {503-510}, publisher = {INDIAN ACADEMY SCIENCES}, type = {Article}, address = {C V RAMAN AVENUE, SADASHIVANAGAR, P B \#8005, BANGALORE 560 080, INDIA}, abstract = {

In this paper, we describe the synthesis of silver nanocrystals within aqueous foams as a template More specifically, we show that aqueous Ag+ ions may be electrostatically complexed with the anionic surfactants aerosol OT (sodium bis-2-ethylhexyl-sulfosuccinate, (AOT) and sodium dodecyl sulphate (SDS)) in a highly stable liquid foam. After drainage of the foam, the silver ions are reduced in situ by introducing sodium borohydride into the foam by capillary flow. This leads to the formation of silver nanoparticles of spherical, tape- and sheet-like morphology in the foam. The structure of the foam is extremely complex and presents reaction sites of different spatial extent. The differences in foam reaction-site geometry are believed to be responsible for the morphology variation in the silver nanoparticles observed. The silver nanoparticles are observed to be extremely stable in solution suggesting that the AOT or SDS molecules stabilize them. This approach appears promising for application in large-scale synthesis of nanoparticles and may be readily extended to other chemical compositions.

}, keywords = {Chemical synthesis, composites, foam, Intercalation, Nanoparticles}, issn = {0250-4707}, doi = {10.1007/BF02711244}, author = {Mandal, Sujata and Arumugam, S. K. and Pasricha, R. and Sastry, M.} } @article { ISI:000226803200008, title = {Synthesis of fine particles of ZnO at 100 degrees C}, journal = {Materials Letters}, volume = {59}, number = {7}, year = {2005}, month = {MAR}, pages = {779-781}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

A simple gel to crystal conversion route has been followed for the preparation of fine ZnO at 80-100 degreesC under refluxing conditions. Freshly prepared zinc hydroxide gel is allowed to crystallize under refluxing and stirring conditions for 4-6 It. Formation of fine crystallites of ZnO is confirmed by X-ray diffraction (XRD) study. Transmission electron microscope (TEM) investigations revealed that the average particle size is 100 nm for these powders. (C) 2004 Elsevier B.V All rights reserved.

}, keywords = {Ceramics, Chemical synthesis, Electron microscopy, Oxides, X-ray diffraction}, issn = {0167-577X}, doi = {10.1016/j.matlet.2004.11.019}, author = {Dhage, S. R. and Pasricha, R. and Ravi, V.} } @article { ISI:000238298100027, title = {Co-precipitation technique for the preparation of ferroelectric BaBi2Ta2O9}, journal = {Materials Chemistry and Physics}, volume = {98}, number = {2-3}, year = {2006}, month = {AUG}, pages = {344-346}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

A simple co-precipitation technique had been successfully applied for the preparation of pure ultrafine single phase BaBi2Ta2O9 (BBT). Ammonium hydroxide and ammonium oxalate were used to precipitate Ba2+, Bi3+ and Ta5+ cations simultaneously. No pyrochlore phase was found while heating powder at 800 degrees C and pure BaBi2Ta2O9 phase was found to be formed by X-ray diffraction. Particle size and morphology was studied by transmission electron spectroscopy (TEM). The room temperature dielectric constant at 1 kHz is 350. The ferroelectric hysteresis loop parameters of these samples were also studied. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {Ceramics, Chemical synthesis, electronic material, ferroelectricity, Oxides}, issn = {0254-0584}, doi = {10.1016/j.matchemphys.2005.09.036}, author = {Dhage, S. R. and Pasricha, R. and Murugan, A. Vadivel and Ravi, V.} }