@article { ISI:000227026100019, title = {Electrochemical studies of poly (3,4-ethylenedioxythiophene) PEDOT/VS2 nanocomposite as a cathode material for rechargeable lithium batteries}, journal = {Electrochemistry Communications}, volume = {7}, number = {2}, year = {2005}, month = {FEB}, pages = {213-218}, publisher = {ELSEVIER SCIENCE INC}, type = {Article}, address = {360 PARK AVE SOUTH, NEW YORK, NY 10010-1710 USA}, abstract = {

Here, we demonstrate the electrochemical characterization of a new type of layered poly (3,4-ethylenedioxythiophene) PEDOT/ VS2 nanocomposite. It has been prepared via flocculation of delaminated VS2 with subsequent in situ oxidative polymerization of 3,4-ethylenedioxythiophene (EDOT) with VS2 as a host material in the presence of an external oxidizing agent. The interlayer spacing Of VS2 expands from 5.71 to 14.01 A and this interlayer separation is consistent with the existence of a monolayer of PEDOT in the VS2 framework. X-ray diffraction, XPS and TEM studies have been;shown the change in interlayer separation is consistent with the existence of two phases of organic and inorganic species in the nanocomposites corresponding to the intercalation of PEDOT in the VS2 framework. The application potential of the nanocomposite as a cathode material for rechargeable lithium batteries is also demonstrated by the electrochemical intercalation of lithium into the PEDOT/VS2 nanocomposite, where a significant enhancement in the discharge capacity is observed (similar to130 mAh/g) compared to that (80 mAh/g) for pristine VS2. (C) 2004 Published by Elsevier B.V.

}, keywords = {layered nanocomposite, lithium batteries, polythiophene, vanadium disulfide}, issn = {1388-2481}, doi = {10.1016/j.elecom.2004.12.013}, author = {Murugan, A. Vadivel and Gopinath, Chinnakonda S. and Vijayamohanan, K.} } @article { ISI:000233825900101, title = {Enhancement of double-layer capacitance behavior and its electrical conductivity in layered poly (3, 4-ethylenedioxythiophene)-based nanocomposites}, journal = {Applied Physics Letters}, volume = {87}, number = {24}, year = {2005}, month = {DEC}, pages = {243511}, publisher = {AMER INST PHYSICS}, address = {CIRCULATION \& FULFILLMENT DIV, 2 HUNTINGTON QUADRANGLE, STE 1 N O 1, MELVILLE, NY 11747-4501 USA}, abstract = {

In this letter, we report on the enhanced double-layer capacitance of a layered poly (3, 4-ethylene dioxythiophene) PEDOT-MoO3 nanocomposite, which has been synthesized by a novel microwave irradiation method. The x-ray photoelectron spectroscopy analysis shows the changes in electron density and the shift in binding energy suggesting charge transfer from sulfur atoms upon PEDOT intercalation between MoO3 layers. The room-temperature conductivity for the PEDOT-MoO3 composite is found to be 1.82x10(-1) S cm(-1), which is four orders of magnitude higher than that of the pristine oxide (3.78x10(-5) S cm(-1)). The enhanced double-layer capacitance of the PEDOT-MoO3 nanocomposite (similar to 300 F g(-1)) compared to that (similar to 40 mF g(-1)) of pristine MoO3 is attributed to higher electronic conductivity, enhanced bidimensionality, and increase in surface area of the nanocomposite.

}, issn = {0003-6951}, doi = {10.1063/1.2140468}, author = {Murugan, A. Vadivel and Viswanath, A. K. and Campet, Guy and Gopinath, Chinnakonda S. and Vijayamohanan, K.} } @article { ISI:000226995900011, title = {Entrapment of poly(3,4-ethylenedioxythiophene) between VS2 layers to form a new organic-inorganic intercalative nanocomposite}, journal = {Journal of Materials Chemistry}, volume = {15}, number = {8}, year = {2005}, month = {JAN}, pages = {902-909}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Here we report the synthesis and characterization of a new class of nanocomposite by direct in situ oxidative polymerization of 3,4-ethylenedioxythiophene (EDOT) with VS2 as a host material in the presence of an external oxidizing agent. Upon intercalation, the interlayer spacing of VS2 expands from 5.71 Angstrom to 14.01 Angstrom, followed by exfoliation and a restacking process facilitating expansion of the lattice in a direction perpendicular to the dichalcogenide layers. This change in interlayer separation is consistent with the existence of two phases of organic and inorganic species in the nanocomposites corresponding to the intercalation of PEDOT in the VS2 framework. The resulting nanocomposite is characterized by thermal analysis (TGA), X-ray diffraction, FTIR, SEM, TEM, and four-probe electrical conductivity measurements. The application potential of the nanocomposite as a cathode material for rechargeable lithium batteries is also demonstrated by the electrochemical intercalation of lithium into the PEDOT-VS2 nanocomposite, where a significant enhancement in the discharge capacity is observed (similar to130 mA h g(-1)) compared to that (80 mA h g(-1)) for pristine VS2.

}, issn = {0959-9428}, doi = {10.1039/b414922j}, author = {Murugan, A. Vadivel and Quintin, M. and Delville, M. H. and Campet, Guy and Vijayamohanan, K.} } @article { ISI:000231406400013, title = {Stereoselective syntheses of (+)-proto, (-)-gala quercitols and carba-L-rhamnose from D-(-)-quinic acid}, journal = {Tetrahedron Letters}, volume = {46}, number = {37}, year = {2005}, month = {SEP}, pages = {6235-6238}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Efficient syntheses of (+)-proto, (-)-gala quercitols and carba-L-rhamnose front D-(-)-quinic acid are described. (c) 2005 Elsevier Ltd. All rights reserved.

}, keywords = {(+)-proto quercitol, (-)-gala quercitol, carba-L-rhamnose, cyclohexanepentols, D-(-)-quinic acid, stereoselectivity}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2005.07.052}, author = {Murugan, A. Vadivel and Yadav, A. K. and Gurjar, M. K.} } @article { ISI:000235860500029, title = {Chemical methods to synthesize FeTiO3 powders}, journal = {Materials Letters}, volume = {60}, number = {11}, year = {2006}, month = {MAY}, pages = {1425-1427}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Three different techniques were used to synthesize FeTiO3 powders. The first method is simple coprecipitation of both Fe and Ti ions under basic conditions using standard ammonia solution from aqueous ferric nitrate and titanium oxy chloride. This precipitate on heating at 400 degrees C produces ilmenite phase. The second method is to digest hydroxide precipitates at 100 degrees C to form FeTiO3 phase. The third technique is to make use of citrate process to form FeTiO3 powders. The phase contents and lattice parameters were Studied by powder X-ray diffraction (XRD). Particle size and morphology were studied by Transmission Electron Microscopy (TEM). (c) 2005 Elsevier B.V. All tights reserved.

}, keywords = {Chemical synthesis, Electron microscopy, electronic materials, X-ray methods}, issn = {0167-577X}, doi = {10.1016/j.matlet.2005.11.041}, author = {Mona, J. and Kale, Sangeeta N. and Gaikwad, A. B. and Murugan, A. Vadivel and Ravi, V.} } @article { ISI:000238298100027, title = {Co-precipitation technique for the preparation of ferroelectric BaBi2Ta2O9}, journal = {Materials Chemistry and Physics}, volume = {98}, number = {2-3}, year = {2006}, month = {AUG}, pages = {344-346}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

A simple co-precipitation technique had been successfully applied for the preparation of pure ultrafine single phase BaBi2Ta2O9 (BBT). Ammonium hydroxide and ammonium oxalate were used to precipitate Ba2+, Bi3+ and Ta5+ cations simultaneously. No pyrochlore phase was found while heating powder at 800 degrees C and pure BaBi2Ta2O9 phase was found to be formed by X-ray diffraction. Particle size and morphology was studied by transmission electron spectroscopy (TEM). The room temperature dielectric constant at 1 kHz is 350. The ferroelectric hysteresis loop parameters of these samples were also studied. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {Ceramics, Chemical synthesis, electronic material, ferroelectricity, Oxides}, issn = {0254-0584}, doi = {10.1016/j.matchemphys.2005.09.036}, author = {Dhage, S. R. and Pasricha, R. and Murugan, A. Vadivel and Ravi, V.} } @article { ISI:000238866300004, title = {Coprecipitation technique to prepare Sr0.5Ba0.5Nb2O6}, journal = {Bulletin of Materials Science}, volume = {29}, number = {3}, year = {2006}, month = {JUN}, pages = {221-223}, publisher = {INDIAN ACADEMY SCIENCES}, type = {Article}, address = {C V RAMAN AVENUE, SADASHIVANAGAR, P B \#8005, BANGALORE 560 080, INDIA}, abstract = {

An aqueous mixture of ammonium oxalate and ammonium hydroxide was used to coprecipitate barium and strontium ions as oxalates and niobium ions as hydroxide under basic conditions. This precursor on calcining at 750 degrees C yielded Sr0.5Ba0.5Nb2O6 phase. This is a much lower temperature than that prepared by traditional solid state method (1000 degrees C) as reported for the formation of Sr0.5Ba0.5Nb2O6 (SBN). Transmission electron microscopic (TEM) investigations revealed that the average particle size was 80 nm for the calcined powders. The room temperature dielectric constant at I kHz was found to be 1100. The ferroelectric hysteresis loop parameters of these samples were also studied.

}, keywords = {Ceramics, Electron microscopy, ferroelectricity, Oxides, X-ray diffraction}, issn = {0250-4707}, doi = {10.1007/BF02706488}, author = {Murugan, A. Vadivel and Gaikwad, A. B. and Samuel, V. and Ravi, V.} } @article { ISI:000241767100009, title = {Eu3+ doped lanthanum oxide nanowhiskers: microwave hydrothermal synthesis, characterization and photoluminescence properties}, journal = {Journal of Physics D-Applied Physics}, volume = {39}, number = {18}, year = {2006}, month = {SEP}, pages = {3974-3977}, publisher = {IOP PUBLISHING LTD}, type = {Article}, address = {DIRAC HOUSE, TEMPLE BACK, BRISTOL BS1 6BE, ENGLAND}, abstract = {

We report here a straightforward and rapid microwave - hydrothermal route providing an easy synthesis of Eu3+ doped La2O3 nanowhiskers. The nanostructured Eu3+ doped La2O3 is characterized by x-ray diffraction studies, scanning electron microscopy and photoluminescence (PL). The emission spectrum shows transitions from the excited 5D(0) state to F-7(J) (J = 0, 1, 2, 3, 4) levels of the Eu3+ ion. The most intense peak around 611 nm is due to the D-5(0) -\> F-7(2) transition, expected from the Judd-Ofelt selection rules. PL spectra measurements demonstrate that the lanthanum oxide nanowhisker shows higher PL intensity.

}, issn = {0022-3727}, doi = {10.1088/0022-3727/39/18/008}, author = {Murugan, A. Vadivel and Viswanath, Annamraju Kasi and Kakade, Bhalchandra A. and Ravi, V. and Saaminathan, V.} } @article { ISI:000238412100062, title = {Exfoliation-induced nanoribbon formation of poly(3,4-ethylene dioxythiophene) PEDOT between MoS2 layers as cathode material for lithium batteries}, journal = {Journal of Power Sources}, volume = {156}, number = {2}, year = {2006}, month = {JUN}, pages = {615-619}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

A new type of layered nanocomposite synthesized by delaminated MoS2 nanosheets and poly(3,4-ethylenedioxythiophene) (PEDOT) are restacked to produce alternate polymer nanoribbons between layers Of MoS2 with an interlayer distance of similar to 1.38 nm. The unique properties of resulting nanocomposite are investigated by powder XRD, XPS, SEM, TEM, and four-probe conductivity measurements. The obtained nanocomposite can be used as a cathode material for a small power rechargeable lithium battery as demonstrated by the electrochemical insertion of lithium into the PEDOT/MoS2 nanocomposite. A significant enhancement in the discharge capacity (100 mAh g(-1)) is observed compared with that (40 mAh g(-1)) for MoS2. (c) 2005 Elsevier B.V All rights reserved.

}, keywords = {cathode material, lithium batteries, MoS2, organic-inorganic nanocomposite, PEDOT-nanoribbons}, issn = {0378-7753}, doi = {10.1016/j.jpowsour.2005.06.022}, author = {Murugan, A. Vadivel and Quintin, M. and Delville, M. H. and Campet, Guy and Gopinath, Chinnakonda S. and Vijayamohanan, K.} } @article { ISI:000241248000088, title = {Highly efficient organic-inorganic poly(3,4-ethylenedioxythiophene)-molybdenum trioxide nanocomposite electrodes for electrochemical supercapacitor}, journal = {Journal of Applied Physics}, volume = {100}, number = {7}, year = {2006}, month = {OCT}, pages = {Article No. 074319}, publisher = {AMER INST PHYSICS}, type = {Article}, address = {CIRCULATION \& FULFILLMENT DIV, 2 HUNTINGTON QUADRANGLE, STE 1 N O 1, MELVILLE, NY 11747-4501 USA}, abstract = {

In this paper, we report a highly efficient organic-inorganic nanocomposite electrode with enhanced double layer capacitance, which has been synthesized using 3,4-ethylenedioxythiophene and crystalline molybdenum trioxide (MoO3) in the presence of an external oxidizing agent. The interlayer spacing of MoO3 upon intercalation expands from 6.93 to 13.46 A and is followed by an exfoliation and restacking process. The resulting nanocomposite is characterized by powder x-ray diffraction, scanning electron microscopy, transmission electron microscopy, x-ray photoelectron spectroscopy, and four probe conductivity measurements. The application potential of this nanocomposite as an electrode material for electrochemical supercapacitors has been investigated, highlighting the unusual enhancement of double layer capacitance of poly(3,4-ethylenedioxythiphene) (PEDOT-MoO3) nanocomposites (similar to 300 F g(-1)) compared to that of pristine MoO3 (similar to 40 mF g(-1)). The improved electrochemical performance is attributed to the intercalation of electronically conducting PEDOT between MoO3 layers with enhanced bidimensionality and an increase in the surface area. (c) 2006 American Institute of Physics.

}, issn = {0021-8979}, doi = {10.1063/1.2356788}, author = {Murugan, A. Vadivel and Viswanath, Annamraju Kasi and Gopinath, Chinnakonda S. and Vijayamohanan, K.} } @article { ISI:000237158200003, title = {Phase evolution of NiTiO3 prepared by coprecipitation method}, journal = {Materials Letters}, volume = {60}, number = {15}, year = {2006}, month = {JUL}, pages = {1791-1792}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

A simple coprecipitation technique was used for the preparation of NiTiO3 powders. Ammonium carbonate solution was added to a solution mixture containing stoichiometric amounts of Ni(NO3)(2) and TiOCl2 to precipitate nickel as carbonate and titanium as hydroxide under basic conditions. The precipitate was calcined at different temperatures ranging from 100 to 800 degrees C and phase evolution of NiTiO3 was investigated by X-ray diffraction (XRD) studies. It is observed that nickel titanate was formed at 750 degrees C. For comparison, NiTiO3 was also prepared by standard ceramic process. Particle size and morphology was studied by transmission electron microscopy (TEM). (c) 2005 Elsevier B.V. All fights reserved.

}, keywords = {Ceramics, Chemical synthesis, Electron microscopy, NiTiO3, Oxides, X-ray diffraction}, issn = {0167-577X}, doi = {10.1016/j.matlet.2005.12.023}, author = {Murugan, A. Vadivel and Samuel, V. and Navale, S. C. and Ravi, V.} } @article { ISI:000240680300119, title = {Photoluminescence studies of Eu3+ doped Y2O3 nanophosphor prepared by microwave hydrothermal method}, journal = {Applied Physics Letters}, volume = {89}, number = {12}, year = {2006}, month = {SEP}, pages = {123120}, publisher = {AMER INST PHYSICS}, type = {Article}, address = {CIRCULATION \& FULFILLMENT DIV, 2 HUNTINGTON QUADRANGLE, STE 1 N O 1, MELVILLE, NY 11747-4501 USA}, abstract = {

In this letter, the authors report the photoluminescence studies of Eu3+ doped Y2O3 nanorods, which have been synthesized by rapid microwave hydrothermal route within 6 min. The nanostructured Eu3+ doped Y2O3 is characterized by x-ray diffraction, transmission electron microscopy, and photoluminescence. The emission spectrum shows transitions from the excited 5D(0) state to F-7(J) (J=0,1,2,3,4) levels of the Eu3+ ion. The most intense peak around 612 nm is due to the D-5(0)-\> F-7(2) transition, expected from the Judd-Ofelt selection rules [B. R. Judd, Phys. Rev. 127, 750 (1962); G. S. Ofelt, J. Chem. Phys. 37, 511 (1962)]. Photoluminescence measurements demonstrated that the nanocrystalline Eu3+:Y2O3 phase shows higher photoluminescence intensity. (c) 2006 American Institute of Physics.

}, issn = {0003-6951}, doi = {10.1063/1.2356694}, author = {Murugan, A. Vadivel and Viswanath, Annamraju Kasi and Ravi, V. and Kakade, Bhalchandra A. and Saaminathan, V.} } @article { ISI:000234951400008, title = {Preparation of nanocrystalline ferroelectric BaBi4Ti4O15 by Pechini method}, journal = {Materials Letters}, volume = {60}, number = {8}, year = {2006}, month = {APR}, pages = {1023-1025}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

A gel was formed when an aqueous solution of BaCl2, BiNO3, TiOCl2 and citric acid in stoichiometric ratio is heated on a water bath. This gel on decomposition at 600 degrees C produced the nano crystallites of ternary oxide, BaBi4Ti4O15 (BBT). The phase contents and lattice parameters were Studied by the powder X-ray diffraction (XRD). Particle size and morphology was studied by transmission electron spectroscopy (TEM). The room temperature dielectric constant at I KHz is 90. The ferroelectric hysteresis loop parameters of these samples were also studied by a home built Sawyer-tower circuit. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {dielectric properties, Electron microscopy, ferroelectric properties, powders chemical preparation}, issn = {0167-577X}, doi = {10.1016/j.matlet.2005.10.068}, author = {Murugan, A. Vadivel and Navale, S. C. and Ravi, V.} } @article { ISI:000246329700015, title = {Cyclic voltammetry, electrochemical impedance and ex situ X-ray diffraction studies of electrochemical insertion and deinsertion of lithium ion into nanostructured organic-inorganic poly(3,4-ethylenedioxythiophene) based hybrids}, journal = {Journal of Electroanalytical Chemistry}, volume = {603}, number = {2}, year = {2007}, month = {MAY}, pages = {287-296}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

In this work, we discuss the electrochemical insertion and deinsertion of lithium into poly(3,4-ethylenedioxythiophene) PEDOT-V(2)O(5) nanohybrids by using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and powder ex situ X-ray diffraction (XRD) studies with special emphasis on their application potential as cathode materials for rechargeable Lithium batteries. The interlayer spacing of crystalline V(2)O(5) expands from 0.43 to 1.41 nm by the intercalation of PEDOT nanoribbons prepared by a microwave irradiation method. Cyclic voltammetry studies of PEDOT-V(2)O(5) hybrid at a slow scan rate of 0.058 mVs(-1) between 2.0-4.3 V vs. Li/ Li(+), demonstrates that structural transitions Of V(2)O(5) are suppressed and more facile intercalation features appear in terms of well-defined reversible cathodic and anodic peaks when compared to that at higher scan rate. Electrochemical Impedance studies of PEDOT-V(2)O(5) hybrid as cathode at ambient temperature with lithium metal foil as both counter and reference electrodes in 1 M LiPF(6) in a mixture of ethylene and diethylcarbonate (50:50 by volume) between the range 2.0-4.3 V reveals the usefulness of these materials. The observed capacity fading during cycling in terms of surface passivation and structural transformations is also investigated by CV, EIS and XRD analysis. (C) 2007 Elsevier B.V. All rights reserved.

}, keywords = {cyclic voltammetry, ex situ XRD studies, high capacity lithium batteries, impedance studies, nanostructured hybrid materials}, issn = {1572-6657}, doi = {10.1016/j.jelechem.2007.02.013}, author = {Murugan, A. Vadivel and Reddy, M. V. and Campet, Guy and Vijayamohanan, K.} } @article { ISI:000246260000011, title = {Preparation of nanocrystalline ferroelectric CaBi4Ti4O15 by citrate gel method}, journal = {Ceramics International}, volume = {33}, number = {4}, year = {2007}, month = {JAN}, pages = {569-571}, publisher = {ELSEVIER SCI LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

A gel was formed when an aqueous solution of CaCl2, BiNO3, TiOCl2 and citric acid in stoichiometric ratio is heated on a water bath. This gel on decomposition at 700 degrees C produced nano crystallites of the ternary oxide, CaBi4Ti4O15 (CBT). The phase contents and lattice parameters were studied by the powder X-ray diffraction (XRD). Particle size and morphology was studied by transmission electron spectroscopy (TEM). The room temperature dielectric constant at 1 kHz is 390. The ferroelectric hysteresis loop parameters of these samples were also studied by a home-built Sawyer-tower circuit. (c) 2006 Elsevier Ltd and Techna Group S.H. All rights reserved.

}, keywords = {Ceramics, Chemical synthesis, Electron microscopy, Oxides, X-ray methods}, issn = {0272-8842}, doi = {10.1016/j.ceramint.2005.11.006}, author = {Murugan, A. Vadivel and Gaikwad, A. B. and Samuel, V. and Ravi, V.} } @article { ISI:000244008300031, title = {Varistors based on Ta-doped TiO2}, journal = {Ceramics International}, volume = {33}, number = {2}, year = {2007}, month = {MAR}, pages = {301-303}, publisher = {ELSEVIER SCI LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

The nonlinear current (I)-voltage (V) characteristics of titanium dioxide are examined when doped with small quantities (0.05-0.5 at.\%) of tantalum pentaoxide. For optimum compositions, the nonlinear coefficients are found to be in the range of 25-30 and the breakdown field strength (EB) is similar to 4000 V/cm. The obtained alpha- and E-B-values are higher than the previously reported values for TiO2 ceramics. The acceptor like surface states at the grain boundary adsorb oxygen during sintering and cooling, leading to formation of grain boundary barrier. The grain boundary barrier height (OB) is calculated using Schottky equation. (c) 2005 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

}, keywords = {Ceramics, Oxides, Schottky barrier, TiO2, varistor}, issn = {0272-8842}, doi = {10.1016/j.ceramint.2005.07.026}, author = {Navale, S. C. and Murugan, A. Vadivel and Ravi, V.} } @article { ISI:000263073800048, title = {Template free synthesis of mesoporous TiO2 with high wall thickness and nanocrystalline framework}, journal = {Journal of Nanoscience and Nanotechnology}, volume = {9}, number = {1, SI}, year = {2009}, month = {JAN}, pages = {371-377}, publisher = {AMER SCIENTIFIC PUBLISHERS}, address = {26650 THE OLD RD, STE 208, VALENCIA, CA 91381-0751 USA}, abstract = {

A simple procedure to prepare nanocrystalline mesoporous titania (meso-TiO2) is reported without any templating agent and it possesses a high BET surface area and a large pore wall thickness (11.3 nm) than that of meso-TiO2 prepared by other methods. Nanocrystalline meso-TiO2 also has been synthesized with hexadecylamine template for comparison through known procedure. The meso-TiO2 materials were characterized by X-ray diffraction, FT-IR, UV-Vis absorbance spectra, thermal analysis, SEM, HRTEM and textural properties through N-2 adsorption-desorption isotherms. Spherical shape particles in a range of few hundred nanometers are obtained in the template free method. Above systematic characterization provides direct indications toward the mechanism of formation of meso-TiO2 in the template free method. A comparison of the physical and textural properties indicates a possibility of coarse-tuning of the textural characteristics of mesoporous TiO2 by adopting different preparation methods.

}, keywords = {Mesopore, Mesopore Formation, Template-Free, Thick Wall, titania}, issn = {1533-4880}, doi = {10.1166/jnn.2009.J019}, author = {Kulkarni, Dhanashree G. and Murugan, A. Vadivel and Viswanath, Annamraju Kasi and Gopinath, Chinnakonda S.} }