@article { ISI:000228625600003, title = {Corrosion protective poly(o-toluldine) coatings on copper}, journal = {Corrosion Science}, volume = {47}, number = {6}, year = {2005}, month = {JUN}, pages = {1352-1369}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

This study examines the use of poly(o-toulidine) (POT) coatings for corrosion protection of copper (Cu) in an aqueous solution of 3\% NaCl. The POT coatings were synthesized on Cu substrates under cyclic voltammetric conditions from an aqueous solution of sodium oxalate. The resulting, POT coatings were uniform, shiny and strongly adherent to the Cu substrates. These coatings were characterized by cyclic voltammetry (CV), UV-visible absorption spectroscopy, Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). The ability of POT to serve as a corrosion protective coating for Cu was examined by potentiodynamic polarization measurements and CV. The results of this study clearly reveal that the POT acts as corrosion protective coating on Cu and reduces the corrosion rate of Cu almost by a factor of 40. (c) 2004 Elsevier Ltd. All rights reserved.

}, keywords = {Conducting polymer coatings, Copper, Corrosion resistant coatings, cyclic voltammetry, poly(o-toluidine) coatings}, issn = {0010-938X}, doi = {10.1016/j.corsci.2004.07.041}, author = {Shinde, V. and Sainkar, S. R. and Patil, P. P.} } @article { ISI:000236648800046, title = {Formation of poly(o-anisidine) coatings on copper from aqueous salicylate solution}, journal = {Surface \& Coatings Technology}, volume = {200}, number = {18-19}, year = {2006}, month = {MAY}, pages = {5557-5565}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Poly(o-anisidine) coatings have been electrosynthesized by using cyclic voltammetry on copper from an aqueous salicylate medium. Cyclic voltammetry, UV-visible absorption spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscopy and X-ray photoelectron spectroscopy were used to characterize these coatings, which indicates that the aqueous salicylate solution is a suitable medium for the electrochemical polymerization of o-anisidine on copper substrate. Cyclic voltammetry accompanied by the X-ray photoelectron spectroscopy was used to characterize the surface modifications induced by polarizing the copper substrate in the aqueous salicylate solution (without monomer). It was shown that the polarization of the copper in the aqueous salicylate medium results into the passivation of its surface via the formation of Cu(2)O and/or copper salicylate complex. It was found that the electrochemical polymerization of o-anisidine takes place after the passivation of the copper substrate via fort-nation of Cu(2)O and/or copper salicylate complex and results into the formation of shiny, uniform and strongly adherent poly(o-anisidine). The optical absorption spectroscopy reveals the formation of emraldine salt form of poly(o-anisidine). This study offers an electrochemical polymerization recipe to synthesize strongly adherent poly(o-anisidine) coating on copper from aqueous media for possible use in corrosion protection application. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {conducting polymers, Copper, corrosion protective coatings, cyclic voltammetry, poly(o-anisidine) coatings}, issn = {0257-8972}, doi = {10.1016/j.surfcoat.2005.07.071}, author = {Chaudhari, Sudeshna and Mandale, A. B. and Patil, K. R. and Sainkar, S. R. and Patil, P. P.} } @article { ISI:000236590300058, title = {Poly(o-toluidine) coatings on copper: electrochemical synthesis from aqueous media}, journal = {Surface \& Coating Technology}, volume = {200}, number = {16-17}, year = {2006}, month = {APR}, pages = {5094-5101}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Poly(o-toluidine) (POT) coatings were synthesized on copper (Cu) by electrochemical polymerization of o-toluidine using aqueous sodium oxalate solution as supporting electrolyte. The resulting coatings were uniform, compact and strongly adherent to the Cu substrate. These coatings were characterized by using cyclic voltammetry, UV-visible absorption spectroscopy, Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD) measurements and X-ray photoelectron spectroscopy (XPS). The results of these studies reveal that the sodium oxalate is suitable supporting electrolyte for the electrochemical polymerization of o-toluidine on Cu substrate. It is found that the electrochemical polymerization of o-toluidine takes place after the passivation of the Cu substrate via formation of copper oxalate (CuC2O4, H2O) layer, which is confirmed by XRD and XPS. The optical absorption spectroscopy study reveals the exclusive formation of the pernigraniline base (PB) form of POT. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {Conducting polymer coatings, Copper, Corrosion resistant coatings, cyclic voltammetry, poly(o-toluidine) coatings}, issn = {0257-8972}, doi = {10.1016/j.surfcoat.2005.05.026}, author = {Shinde, V. and Mandale, A. B. and Patil, K. R. and Gaikwad, A. B. and Patil, P. P.} } @article { ISI:000242818000001, title = {Synthesis and characterization of corrosion protective poly(2,5-dimethylaniline) coatings on copper}, journal = {Applied Surface Science}, volume = {253}, number = {3}, year = {2006}, month = {NOV}, pages = {1037-1045}, publisher = {ELSEVIER SCIENCE BV}, type = {Review}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Poly(2,5-dimethylaniline) coatings were synthesized on copper (Cu) by electrochemical polymerization of 2,5-dimethylaniline in aqueous salicylate solution by using cyclic voltammetry. The characterization of these coatings was carried out by cyclic voltammetry, UV-visible absorption spectroscopy, Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). The results of these characterizations indicate that the aqueous salicylate solution is a suitable medium for the electrochemical polymerization of 2,5-dimethylaniline to generate strongly adherent and smooth poly (2,5-dimethylaniline) coatings on Cu substrates. The performance of poly(2,5-dimethylaniline) as protective coating against corrosion of Cu in aqueous 3\% NaCl was assessed by the potentiodynamic polarization technique. The results of the potentiodynamic polarization demonstrate that the poly(2,5-dimethylaniline) coating has ability to protect the Cu against corrosion. The corrosion potential was about 0.078 V versus SCE more positive in aqueous 3\% NaCl for the poly(2,5-dimethylaniline) coated Cu than that of uncoated Cu and reduces the corrosion rate of Cu almost by a factor of 31. (c) 2006 Elsevier B.V. All rights reserved.

}, keywords = {5-dimethylaniline) coatings, conducting polymers, Copper, Corrosion resistant coatings, cyclic voltammetry, Electrochemical polymerization, Poly(2}, issn = {0169-4332}, doi = {10.1016/j.apsusc.2006.02.007}, author = {Shinde, Vandana and Gaikwad, A. B. and Patil, P. P.} } @article { ISI:000246978800026, title = {Corrosion protection aspects of electrochemically synthesized poly(o-anisidine-co-o-toluidine) coatings on copper}, journal = {Electrochimica Acta}, volume = {52}, number = {19}, year = {2007}, month = {MAY}, pages = {5958-5967}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

The poly(o-anisidine-co-o-toluidine) coatings were synthesized on copper substrates by electrochemical copolymerization of o-anisidine with o-toluidine using sodium salicylate as supporting electrolyte. These coatings were characterized by cyclic voltammetry, UV-vis absorption spectroscopy, Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (NMR) and scanning electron microscopy (SEM). The formation of the copolymer with the mixture of monomers in the aqueous sodium salicylate solution was ascertained by a critical comparison of the results obtained with the polymerization of the individual monomers, o-anisidine and o-toluidine, respectively. The corrosion protection aspects of poly(o-anisidine-co-o-toluidine) coatings to copper was investigated in aqueous 3\% NaCl solution by potentiodynamic polarization technique and electrochemical impedance spectroscopy (EIS). The results of the potentiodynamic polarization measurements and EIS studies showed that the poly(o-anisidine-co-o-toluidine) coatings provided the effective corrosion protection to copper than that of respective homopolymers. The corrosion rate is observed to depend on the feed ratio of o-toluidine used for the synthesis of the copolymer coatings. (C) 2007 Elsevier Ltd. All rights reserved.

}, keywords = {copolymer coatings, Copper, Corrosion resistant coatings, cyclic voltammetry, poly(o-anisidine-co-o-toluidine)}, issn = {0013-4686}, doi = {10.1016/j.electacta.2007.03.043}, author = {Pawar, Pritee and Gaikwad, A. B. and Patil, P. P.} } @article { ISI:000254367800011, title = {Synthesis and corrosion protection study of poly(o-ethylaniline) coatings on copper}, journal = {Surface \& Coatings Technology}, volume = {202}, number = {12}, year = {2008}, month = {MAR}, pages = {2591-2602}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Poly(o-ethylaniline) coatings were synthesized on copper (Cu) by electrochemical polymerization of o-ethylaniline in an aqueous salicylate solution by using cyclic voltammetry. The characterization of these coatings was carried out by cyclic voltammetry, UV-visible absorption spectroscopy, Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The results of these characterizations indicate that the aqueous salicylate solution is a suitable medium for the electrochemical polymerization of o-ethylaniline to generate strongly adherent and smooth poly(o-ethylaniline) coatings on Cu substrates. The performance of poly(o-ethylaniline) as protective coating against corrosion of Cu in aqueous 3\% NaCl was assessed by the potentiodynamic polarization technique and electrochemical impedance spectroscopy (EIS). The results of these studies demonstrate that the poly(o-ethylaniline) coating has ability to protect the Cu against corrosion. The corrosion potential was about 0.078 V versus SCE more positive in aqueous 3\% NaCl for the poly(o-ethylanitine) coated Cu (similar to 15 mu m thick) than that of uncoated Cu and reduces the corrosion rate of Cu almost by a factor of 70. (C) 2007 Elsevier B.V. All rights reserved.

}, keywords = {conducting polymers, Copper, Corrosion resistant coatings, cyclic voltammetry, Electrochemical polymerization, poly(o-ethylaniline) coatings}, issn = {0257-8972}, doi = {10.1016/j.surfcoat.2007.09.025}, author = {Shinde, Vandana and Gaikwad, A. B. and Patil, P. P.} }