@article {49283,
	title = {Triazatruxene amine donor-based visible-light-responsive unsymmetrical squaraine dyes for dye-sensitized solar cells},
	journal = {ACS Applied Energy Materials},
	volume = {7},
	year = {2024},
	month = {SEP},
	pages = {7982-7991},
	type = {Article},
	abstract = {<p>
	Optimized charge-transfer dynamics at the dye-TiO2/electrolyte interface are required for an enhanced dye-sensitized solar cell (DSSC) device performance. Such an optimized interface enhances the charge-injection, dye-regeneration, and diminished charge-recombination processes, synergistically enhancing the device efficiency. In this study, octupolar-structured sensitizers are designed to improve the interaction between the dye and the redox electrolyte for increasing the dye-regeneration process upon photoexcitation. Accordingly, a set of unsymmetrical squaraine dyes with indoline and triazatruxene amine donor-based D-A-D dyes are designed (KV1-KV3), synthesized, and sensitized with a semiconducting metal oxide (TiO2) film. The sensitizer forms a monolayer on the TiO2 surface, leading to a dye-dye interaction, which broadens the absorption spectrum. The N atom of the triazatruxene amine donor was left unsubstituted in KV1, whereas a hexyl chain was installed in KV2 and KV3 and a branched alkyl chain was installed on the core N atoms in KV3 to control the self-assembly of dyes on the TiO2 surface. Self-assembly of alkyl groups wrapped in KV1-KV3 dyes on the TiO2 surface aids surface passivation and broadens the absorption profile, improving the light-harvesting capabilities. The DSSC devices based on KV2 exhibited a high power conversion efficiency of 7.85\% (V-oc = 794 mV, J(sc) = 14.76 mA/cm(2), and FF = 67\%), with an onset incident photon-to-current conversion efficiency response from 680 nm.</p>
},
	keywords = {aggregationof dyes, Dye-sensitized solar cells, metal-free organic dyes, self-assembly of dye, squaraine dyes, triazatruxene},
	issn = {2574-0962},
	doi = {10.1021/acsaem.4c01591},
	author = {Ingole, Kiran Balaso and Deshmukh, Shivdeep Suresh and Verma, Tushar Singh and Krishnamurty, Sailaja and Krishnamoorthy, Kothandam and Nithyanandhan, Jayaraj}
}
@article {49516,
	title = {Effect of cyclization and alkyl group wrapping in visible-light-active unsymmetrical squaraine dyes for dye-sensitized solar cells},
	journal = {ACS Applied Energy Materials},
	volume = {8},
	year = {2025},
	month = {APR },
	pages = {5017-5030},
	type = {Article},
	abstract = {<p>
	A series of alkyl group-appended indoline- and carboxylic acid-functionalized indolenine-based visible-light-active unsymmetrical squaraine dyes, SQA7-10, were designed, synthesized, and utilized for the dye-sensitized solar cells device fabrication. The number of alkyl group has been increased systematically on the indoline moiety to control the self-assembly of dyes on TiO2 and to passivate the photoanode that helps in improving the open-circuit voltage (V-OC) by avoiding the charge recombination process. SQA7-10 dyes showed an absorption between lambda(max) 536-540 nm, with molar extinction coefficients of 1.62-2.13 x 10(5) M-1 cm(-1) in CH3CN. Further, ultraviolet-visible (UV-vis) studies on TiO2 indicated the formation of H-aggregated dyes (505-510 nm), which can be controlled by appending the alkyl groups. The energy levels of the highest occupied molecular orbital (HOMO) of these dyes are well aligned with the Nernst potentials of I-/I(3)(-)electrolyte and [Cu(tmby)(2)](+/2+) electrolytes with sufficient overpotentials required for the dye regeneration process. DSSC devices made with these dyes showed systematic enhancements of open-circuit voltage (V-OC) and device efficiency with respect to alkyl group incorporation for SQA7-10 with I-/I-3(-) electrolytes. All of the SQA dyes exhibited the device V-OC of more than 805 mV, where the introduction of alkyl groups systematically enhanced the V-OC in the order of SQA7 (805 mV) \&lt; SQA8 (829 mV) \&lt; SQA9 (843 mV) \&lt; SQA10 (862 mV) without any addition of CDCA. Within the SQA dye series, SQA10 dye has achieved the highest DSSC device efficiency of 7.52\% (J(sc) of 11.16 mA/cm(2), V-oc of 862 mV, and ff of 78\%) with I-/I-3(-) electrolyte, whereas use of [Cu(tmby)(2)](+/2+) redox shuttle with SQA10 showed enhanced V-oc (1080 mV) and device efficiency (8.35\%). The IPCE profile for the device fabricated with SQA dyes showed good response at 480 and 560 nm, which indicates the photocurrent generation from the aggregated structures.</p>
},
	keywords = {aggregation of dyes, charge recombination, Dye-sensitized solar cells, indoline and indolenine donors, visible-light-activeunsymmetrical squaraine dye},
	issn = {2574-0962},
	doi = {10.1021/acsaem.4c03116},
	author = {Jadhav, Avinash P. and Singh, Ambarish Kumar and Shivankar, Bhavana R. and Siby, Jesna and Krishnamurty, Sailaja and Krishnamoorthy, Kothandam and Nithyanandhan, Jayaraj}
}
