@article { ISI:000275434800071, title = {Novel poly(amide-hydrazide)s and copoly(amide-hydrazide)s from Bis-(4-aminobenzyl) hydrazide and aromatic diacid chlorides: synthesis and characterization}, journal = {Journal of Applied Polymer Science}, volume = {116}, number = {4}, year = {2010}, month = {MAY}, pages = {2441-2450}, publisher = {JOHN WILEY \& SONS INC}, address = {111 RIVER ST, HOBOKEN, NJ 07030 USA}, abstract = {

A new aromatic diamine, viz., bis-(4-aminobenzyl) hydrazide (BABH), which contains preformed hydrazide and methylene linkage, was synthesized starting from alpha-tolunitrile. The BABH and intermediates involved in its synthesis were characterized by spectroscopic methods. Novel poly(amide-hydrazide)s were synthesized by low temperature solution polycondensation of BABH with isophthaloyl chloride (IPC) and terephthaloyl chloride (TPC). Furthermore, two series of copoly(amide-hydrazide)s, based on different mol \% of BABH and bis-(4-aminophenyl) ether (ODA) with IPC/TPC were also synthesized. Poly(amidehydrazide)s and copoly(amide-hydrazide)s were characterized by inherent viscosity [eta(inh)], FTIR, solubility, X-ray diffraction (MUD), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The polycondensation proceeded smoothy and afforded the polymers with inherent viscosities in the range of 0.18-093 dL/g in (NMP + 4\% LiCl) at 30 degrees C +/- 0.1 degrees C. These polymers dissolved in DMAc, NMP or DMSO containing LiCl. The solubility of copolymers was considerably improved in line with less crystalline nature due to random placement of constituent monomers during the copolymerization. XRD data indicated that poly(amide-hydrazide)s from BABH alone and IPC/TPC had higher crystallinity than the corresponding copoly(amide-hydrazide)s derived from a mixture of BABH and bis-(4-aminophenyl) ether (ODA). Polymers showed initial weight loss around 160 degrees C which is attributed to the cyclodehydration leading to the formation of corresponding poly(amide-oxadiazole)s. Copolyamide-hydrazides showed, T(max) between 400 and 540 degrees C which is essentially the decomposition of poly(amide-oxadiazole)s. (C) 2010 Wiley Periodicals, Inc. J App Polym Sci 116: 2441-2450, 2010

}, keywords = {bis-(4-aminobenzyl) hydrazide, poly(amide-hydrazide), structure-property relations, Thermogravimetric analysis (TGA), x-ray diffractograms}, issn = {0021-8995}, doi = {10.1002/app.31849}, author = {Medhi, M. and Patil, A. S. and Halhalli, Mahadeo R. and Choubey, A. and Wadgaonkar, P. P. and Maldar, Noormahamad N.} } @article { ISI:000278307300018, title = {Synthesis and characterization of novel aromatic-aliphatic polyamides from bis-[(4-aminobenzyl)-4-benzamide] ether}, journal = {Materials Science and Engineering B-Advanced Functional Solid-State Materials}, volume = {168}, number = {1-3, SI}, year = {2010}, note = {Conference on Specialty Advanced Materials and Polymers for Aerospace and Defense and Applications (SAMPADA-2008), Mat Res Soc Singapore, Singapore, SINGAPORE, JUL 03-08, 2005}, month = {APR}, pages = {111-116}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

A novel aromatic diamine monomer containing preformed aromatic-aliphatic amide and ether linkage, bis-[(4-aminobenzyl)-4-benzamide] ether (BABE) was prepared from 2-phenylacetonitrile. BABE was characterized by FT-IR, (1)H NMR, (13)C NMR and mass spectrometry. Five new aromatic polyamides were prepared by low temperature solution polymerization from BABE and different mole proportions of isophthaloyl chloride (IPC) or terephthaloyl chloride (TPC). The resulting polymers were characterized by means of FT-IR, inherent viscosity [eta(inh)], solubility, differential scanning calorimetry [DSC], thermogravimetric analysis [TGA] and X-ray diffraction [XRD]. Polyamides were obtained in good yields and had moderate to high molecular weights as indicated by inherent viscosities in the range 0.63-1.35 dL/g in (DMAc + 4\% LiCl). XRD results showed the partly crystalline nature of polymers and these polymers dissolved in aprotic polar solvents containing LiCl. The solubility of copolyamides improved due to random placement of constituent IPC and TPC during polymerization. DSC analysis of these polyamides showed glass transition temperatures in the range of 197-204 degrees C, and they showed no weight loss below 336 degrees C when analyzed by TG. These polyamides have potential applications as engineering materials. (C) 2009 Elsevier B.V. All rights reserved.

}, keywords = {Bis-[(4-aminobenzyl)-4-benzamide] ether, ether linkage, Inherent viscosity, polyamides, thermal stability, XRD}, issn = {0921-5107}, doi = {10.1016/j.mseb.2009.10.016}, author = {Patil, A. S. and Medhi, M. and Sadavarte, Nilakshi V. and Wadgaonkar, P. P. and Maldar, Noormahamad N.} } @article { ISI:000278307300032, title = {Synthesis and characterization of polyesters from 2,3-bis (4 {\textquoteleft}-hydroxy phenyl) quinoxaline and 2,3-bis (2 {\textquoteleft}-hydroxynaphthalene-6 {\textquoteleft}-yl) quinoxaline}, journal = {Materials Science and Engineering B-Advanced Functional Solid-State Materials}, volume = {168}, number = {1-3, SI}, year = {2010}, note = {Conference on Specialty Advanced Materials and Polymers for Aerospace and Defense and Applications (SAMPADA-2008), Mat Res Soc Singapore, Singapore, SINGAPORE, JUL 03-08, 2005}, month = {APR}, pages = {186-192}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Two bisphenols containing pendant, quinoxaline moiety; 2,3-bis (4{\textquoteright}-hydroxy phenyl) quinoxaline (BHPQ) and 2,3-bis (2{\textquoteright}-hydroxynaphthalene-6-yl) quinoxaline (BHNQ) were synthesized and characterized by FT-IR, (1)H, (13)C NMR and mass spectrometry. Aromatic polyesters and copolyesters were prepared by interfacial polymerization from BHPQ or BHNQ and isophthaloyl chloride or terephthaloyl chloride or a mixture of different mole proportions of (IPC + TPC). These polyesters and copolyesters were characterized by spectroscopic technique, viscosity measurement, solubility, thermal stability. DSC and XRD. Polymers had moderate to high molecular weights as evidenced by the inherent viscosities in the range 0.35-0.78 dL/g for BHPQ series and 0.27-0.52 dL/g for BHNQ series. BHPQ polyesters and copolyesters dissolved in m-cresol, NMP and conc. H(2)SO(4) whereas, BHNQ polyesters and copolyesters were readily soluble in NMP, DMAc, (TCE + phenol) and partly soluble in solvent like CHCl(3), pyridine, etc. Wide angle X-ray diffraction (WAXD) results showed that introduction of quinoxaline moiety into polymer chain and aromatic phenyl/rigid naphthyl structures lead to crystalinity. Differentional scanning calorimetry of BHNQ polyesters showed the glass transition temperatures in the range of 131-151 degrees C. BHPQ polyesters did not show any weight loss below 330 degrees C and retained 27-55\% weight at 900 degrees C when investigated by TGA under nitrogen atmosphere demonstrating good thermal stability BHNQderived polyesters showed initial decomposition temperatures in range 211-234 degrees C. The structure-property relationships for the mentioned polyesters are analyzed, as these polyesters are of interest as materials for electronics, microelectronics and membrane separation. (C) 2009 Elsevier B.V. All rights reserved.

}, keywords = {2, 3-Bis (2 {\textquoteleft}-hydroxynaphthalene-6 {\textquoteleft}-yl) quinoxaline, 3-Bis (4 {\textquoteleft}-hydroxy phenyl) quinoxaline, Aromatic polyesters, Glass transition temperature, solubility, Thermal properties}, issn = {0921-5107}, doi = {10.1016/j.mseb.2009.12.036}, author = {Patil, V. B. and Medhi, M. and Bhairamadgi, Nagendra S. and Wadgaonkar, P. P. and Maldar, Noormahamad N.} }