@article { ISI:000356755500019, title = {Catalytic upgrading of citric acid to environmental friendly tri-butyl citrate plasticizer over ultra stable phosphonated Y zeolite}, journal = {Chemical Engineering Research \& Design}, volume = {98}, year = {2015}, month = {JUN}, pages = {212-219}, publisher = {INST CHEMICAL ENGINEERS}, address = {165-189 RAILWAY TERRACE, DAVIS BLDG, RUGBY CV21 3HQ, ENGLAND}, abstract = {

The catalytic synthesis of non-toxic/eco-friendly tributyl citrate (TBC) plasticizer by esterification of renewable citric acid (CA) with butanol would be completely sustainable route. In this context, catalytic performance of parent ultra stable Y (USY) and phosphonated USY catalysts were investigated for TBC synthesis. Parent USY and phosphonated USY catalysts were characterized by powder X-ray diffraction (XRD), N-2 adsorption-desorption, NH3 temperature programmed desorption (TPD), pyridine-Fourier Transform Infrared Spectroscopy (FTIR), FTIR, SEM, ICP. The influence of various process parameters such as phosphorous (P) loading (0 to 4 wt/\%), catalyst loading (5-25\%), molar ratio of CA to n-butanol (1:4 to 1:12), reaction temperature (383-423 K) and reaction time (1-5 h) have been investigated over USY catalyst with aim to maximize CA conversion and TBC yield. Amongst the studied catalysts, the 2\% (w/w) P/USY was found to be highly potential catalyst with complete CA conversion (100\%) and 93\% TBC yield. The present method of using 2\% (w/w) P/USY catalyst for the synthesis of TBC would be environmentally benign in the context of bio-renewable synthetic route, high catalytic activity, non-toxic product, long term stability and reusability of catalyst (five catalytic cycles). (c) 2015 The Institution of Chemical Engineers. Published by Elsevier B.V. All rights reserved,

}, keywords = {Butanol, Citric acid, heterogeneous catalysis, Plasticizer, Tributyl citrate}, issn = {0263-8762}, doi = {10.1016/j.cherd.2015.04.037}, author = {Nandiwale, Kakasaheb Y. and Gogoi, Pranjal and Bokade, Vijay V.} } @article {46147, title = {Epoxidation of karanja (Millettia pinnata) oil methyl esters in the presence of hydrogen peroxide over a simple niobium-containing catalyst}, journal = {Catalysts}, volume = {9}, year = {2019}, month = {APR}, pages = {344}, type = {Article}, abstract = {

The synthesis, characterization and catalytic performance of a conceptually simple, novel NbOx-SiO2 catalyst are here described. The niobium(V)-silica catalyst was prepared starting from cheap and viable reactants, by alkaline deposition of NH4Nb(C2O4)(2)H2O in the presence of fructose as a stabilizer and subsequent calcination. The NbOx-SiO2 solid (0.95 Nb wt.\%) was tested in the liquid-phase epoxidation with aqueous hydrogen peroxide of methyl oleate, as a model substrate. It was then tested in the epoxidation of a mixture of methyl esters (FAMEs) obtained by transesterification with methanol and purification of karanja oil, extracted from the autochthonous Indian variety of Millettia pinnata tree. The catalyst showed a promising performance in terms of methyl oleate conversion (up to 75\%) and selectivity to epoxide (up to 82\%). It was then tested on the FAME mixture from karanja oil, where interesting conversion values were attained (up to 70\%), although with lower selectivities and yields to the mixture of desired epoxidized FAMEs. The solid withstood four catalytic cycles overall, during which a non-negligible surface reorganization of the Nb(V) sites was observed. However, this restructuring did not negatively affect the performance of the catalysts in terms of conversion or selectivity.

}, keywords = {epoxidation, fatty acid methyl esters, heterogeneous catalysis, Hydrogen peroxide, karanja oil, mesoporous silica catalyst, Millettia pinnata, niobium catalysts}, issn = {2073-4344}, doi = {10.3390/catal9040344}, author = {Scotti, Nicola and Ravasio, Nicoletta and Evangelisti, Claudio and Psaro, Rinaldo and Penso, Michele and Niphadkar, Prashant S. and Bokade, Vijay V. and Guidotti, Matteo} } @article {48741, title = {Direct conversion of N-acetyl-d-glucosamine to N-containing heterocyclic compounds 3-acetamidofuran and 3-acetamido-5-acetyl Furan}, journal = {Waste and Biomass Valorization}, volume = {14}, year = {2023}, month = {DEC}, pages = {4201-4214}, type = {Article}, abstract = {

Purpose Effectual waste utilization from plant as well as marine biomass has gained tremendous importance with reference to sustainability. The valorization of marine biomass produces value added compounds containing not only C, H, O but also renewable N atom in the skeleton which widens the scope for its exploration which may prove to be economically beneficial to the society. Heterogeneous catalytic transformation of marine biomass i.e. N-acetyl glucosamine (NAG) to N-substituted aromatic heterocyclic furan derivatives is reported for the very first time. Cost effective and stable metal oxide catalysts were deployed for the transformation. Catalyst screening study showed that La2O3 was found to be an excellent catalyst for N-acetyl glucosamine (NAG) dehydration which mainly produced 3-acetamidofuran (3AF). Methods The physicochemical properties of the metal oxide catalyst were investigated by various techniques such as XRD, FTIR, MeOH-FTIR, TPD, SEM, N-2 sorption studies and HR-TEM analysis for structure activity relationship. Results The effect of various reaction parameters such as catalyst concentration, reaction temperature, reaction time and solvent effect on dehydration of N-acetyl glucosamine has been studied in detail for higher yields. The results revealed that the presence of weak basic sites which are Bronsted in nature and nano pores present on the surface were responsible for improved dehydration of the chitin biomass to selectively yield 3-acetamidofuran (3AF). La2O3 catalyst showed optimum 50\% 3AF yield from N-acetyl glucosamine at 180 degrees C in 3 h. Conclusion Efficacious exploitation of marine biomass to value added chemicals using heterogeneous catalysts can be extensively exploited. Separation of N-substituted heterocyclic aromatics is the most innovative aspect of the current study. Thus, utilization of heterogeneous catalyst and renewable biomass as a raw material indicates a transition towards more sustainable and greener approach.{GRAPHICAL ABSTRACT

}, keywords = {3-acetamido-5-acetylfuran, 3-acetamidofuran, dehydration, heterogeneous catalysis, Lanthanum oxide, N-acetyl-D-glucosamine, renewable feedstock}, issn = {1877-2641}, doi = {10.1007/s12649-023-02127-2}, author = {Shaikh, Samrin S. and Patil, Chetana R. and Lucas, Nishita and Bokade, Vijay V. and Rode, Chandrashekhar V.} }