@article { ISI:000239542900032, title = {Direct synthesis of nanocrystalline silver from the reaction between silver carboxylates and n-trioctylphosphine}, journal = {Journal of Nanoscience and Nanotechnology}, volume = {6}, number = {7}, year = {2006}, month = {JUL}, pages = {2095-2102}, publisher = {AMER SCIENTIFIC PUBLISHERS}, type = {Article}, address = {26650 THE OLD RD, STE 208, VALENCIA, CA 91381-0751 USA}, abstract = {

Neat n-Trioctylphosphine (TOP) has been used for the first ever time for reduction of silver nitrate and silver carboxylates (citrate, oleate, and myristate) under mild thermal reaction conditions. UV-visible absorption measurements of re-dispersible silver particles that were obtained by reduction of silver myristrate (product-IV) and silver nitrate (product-I) showed surface plasmon resonance absorption peak at 400 nm. The powder XRD pattern of fcc zero-valent silver resulted in diameters in the range of about 25-30 nm. TEM analysis showed particle diameter similar to that was observed by the XRD. FTIR spectroscopy revealed that the organics from the carboxylate group are retained by the nano-particles in case of product-IV however, presence of TOP is observed in product-I. It is found that when silver nitrate is reduced by TOP, spherical silver nano-particles with poor redispersity are formed but extended heating results in formation of long silver rods of micrometer size however, the re-dispersible nano-particles are easily formed when silver carboxylates are reduced by TOP.

}, keywords = {Chemical synthesis, Nanocrystalline, noble metal, XRD}, issn = {1533-4880}, doi = {10.1166/jnn.2006.339}, author = {Charan, Shobhit and Singh, Narendra and Khanna, P. K. and Patil, K. R.} } @article { ISI:000242469000012, title = {Unusual formation of nano-particles of CdO and Cd(OH)(2) from the reaction of dimethyl cadmium with DMF}, journal = {Materials Letters}, volume = {60}, number = {29-30}, year = {2006}, month = {DEC}, pages = {3492-3498}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

This paper presents generation of CdO and Cd(OH)(2) nano-particles from Dimethyl Cadmium in DMF. The CdO nano-particles were obtained instead of CdSe, even when the reaction was done in presence of 1,2,3-selenadiazole (the source of selenium) with Me2Cd in DMF (product-I). The direct reaction of Me2Cd in DMF also leads to formation of CdO (product-II). However, Cd(OH)(2) nano-particles were obtained when Me2Cd was refluxed in DMF for a few hours followed by reaction of H2S gas (product-III). The formation of Cd(OH)(2) was also established via decomposition Of Me2Cd:Et2O adduct (product-IV). Nano-particles of CdO and Cd(OH)(2) (product-I to product-IV) were characterized by X-ray powder diffraction (XRD), TEM and SEM/EDS measurements, FTIR, thermal analysis (TGA) and XPS analysis. The particle size of all the products as calculated by XRD patterns were in the range of about 20 nm. TEM images showed that the products are agglomerated clusters with the particles in the nano-meter regime. The synthesis however, is understood to be unusual as the reactions with selenium source and sulfur source should have generated the CdSe and CdS however, the end products were always found to be the product-I to product-IV (c) 2006 Elsevier B.V. All rights reserved.

}, keywords = {Chemical synthesis, Nanoparticles, Semiconductor, XRD}, issn = {0167-577X}, doi = {10.1016/j.matlet.2006.03.054}, author = {Singh, Narendra and Charan, Shobhit and Patil, K. R. and Viswanath, A. K. and Khanna, P. K.} } @article { ISI:000262987800024, title = {Solid state synthesis and room temperature magnetic properties of iron phosphide nanoparticles}, journal = {Journal of Nanoparticle Research}, volume = {11}, number = {2}, year = {2009}, month = {FEB}, pages = {491-497}, publisher = {SPRINGER}, address = {VAN GODEWIJCKSTRAAT 30, 3311 GZ DORDRECHT, NETHERLANDS}, abstract = {

Room temperature magnetic properties have been achieved for nano-crystalline iron phosphide synthesized from the direct solid state reaction of iron chloride and tri-octylphosphine (TOP). The magnetization continuously increased with higher magnetic fields, indicating a super-paramagnetic behavior. It is observed that room temperature magnetism is possible for the material showing antiferromagnetic nature at low temperatures. In the present synthesis, TOP acted as a source of phosphorus as well as a surfactant. X-ray diffraction (XRD) studies revealed that the black powder is a mixture of FeP and Fe(2)P. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) showed elongated as well spherical particles. Energy dispersion X-ray analysis (EDAX) confirmed a non-stoichiometric iron phosphide. Presence of TOP was confirmed by infra-red (IR) spectroscopy, and thermo-gravimetric analysis (TGA) indicated about 6\% wt. loss due to presence of organics.

}, keywords = {Iron phosphide, Semiconductors, Solid state reaction, synthesis, XRD}, issn = {1388-0764}, doi = {10.1007/s11051-008-9458-0}, author = {Singh, N. and Khanna, P. K. and Joy, Pattayil Alias} } @article { ISI:000291568100065, title = {Glycerol mediated low temperature synthesis of nickel nanoparticles by solution reduction method}, journal = {Journal of Nanoscience and Nanotechnology}, volume = {11}, number = {6}, year = {2011}, month = {JUN}, pages = {5131-5136}, publisher = {AMER SCIENTIFIC PUBLISHERS}, address = {25650 NORTH LEWIS WAY, STEVENSON RANCH, CA 91381-1439 USA}, abstract = {

Phase pure Nickel nano-particles were synthesized by in-situ generation of nickel hydrazine hydrate complex (Ni-HH) followed by its decomposition in an alkaline glycerol medium. The synthesis can be performed in an open beaker with or without the use of surface protective reagents. By using the present method, Ni nano-particles can be prepared in large scale. The black nano-powders so-obtained were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), selected area electron diffraction (SAED), Scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), Fourier transform infra-red (FTIR) spectroscopy and thermal analysis (TGA). XRD and SAED analysis revealed that the synthesized particles were pure crystalline nickel with FCC structure.

}, keywords = {Chemical Reduction, Nano-Particles, synthesis, Transition Metal, XRD}, issn = {1533-4880}, doi = {10.1166/jnn.2011.4142}, author = {Singh, Kalpana and Kate, Kunal H. and Chilukuri, V. V. Satayanarayana and Khanna, P. K.} }