@article { ISI:000245369300017, title = {Correlation between mobility enhancement and conformational change in polyaniline and its derivatives: polaron lattice formation}, journal = {Electrochimica Acta}, volume = {52}, number = {11}, year = {2007}, month = {MAR}, pages = {3615-3620}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Conformational changes in polyaniline, poly(methyl aniline), and poly(methoxyaniline) are studied in perchloric acid and acetonitrile by means of an in situ reflection technique with oxidation level as a parameter. Stretching of polymer chains leading to enhancement of specular reflection at the polymer-coated electrodes is found to be well correlated with the increase in carrier mobility. The concomitant change in mobility and chain conformation observed with the polyaniline family is explained in terms of the formation of polaron lattice at increased oxidation levels. (c) 2006 Elsevier Ltd. All rights reserved.

}, keywords = {Conformation, polyaniline, reflection, scattering : mobility}, issn = {0013-4686}, doi = {10.1016/j.electacta.2006.10.040}, author = {Harima, Yutaka and Ogawa, Fumiyuki and Patil, Rahul and Jiang, Xiaoqing} } @article { ISI:000250169800037, title = {Influence of film structure on mobilities of charge carriers in conducting polymers}, journal = {Electrochimica Acta}, volume = {52}, number = {28}, year = {2007}, month = {NOV}, pages = {8088-8095}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Two sorts of poly(3-hexylthiophene) (PHT) films with the same chemical compositions were prepared, and their electrochemical, spectroscopic, and transport properties were studied with a special interest in a possible influence of film structure on mobilities of charge carriers. One of the PHT films was electrochemically synthesized using 3-hexylthiophene as a monomer (as-grown film) and the other was obtained by dissolving the as-grown film in chloroform and then casting the polymer solution (cast film). A clear difference was observed in the mobility versus doping level plot between the two sorts of PHT films, demonstrating that the difference is caused only by a distinction in film structure. An initial decreasing feature of the mobility plot observed for the cast films was accounted for in terms of swelling of the films at an early stage of doping. (C) 2007 Elsevier Ltd. All rights reserved.

}, keywords = {Doping, electrosynthesis, mobility, poly(3-hexylthiophene), swelling}, issn = {0013-4686}, doi = {10.1016/j.electacta.2007.07.007}, author = {Harima, Yutaka and Jiang, Xiaoqing and Patil, Rahul and Komaguchi, Kenji and Mizota, Haruo} } @article { ISI:000246869200003, title = {New technique to study kinetics of chain conformation in polyaniline films}, journal = {Polymer Journal}, volume = {39}, number = {4}, year = {2007}, month = {FEB}, pages = {296-297}, publisher = {SOC POLYMER SCIENCE JAPAN}, type = {Article}, address = {TSUKIJI DAISAN NAGAOKA BLDG, 2-4-2 TSUKIJI, CHUO-KU, TOKYO, 104, JAPAN}, keywords = {Conformation, kinetics, laser, polyaniline, reflection}, issn = {0032-3896}, doi = {10.1295/polymj.PJ2006188}, author = {Harima, Yutaka and Kishimoto, Kazuya and Ogawa, Fumiyuki and Jiang, Xiaoqing and Patil, Rahul} } @article { ISI:000249567000008, title = {Transport study on as-grown and cast films of electrogenerated poly(3-hexylthiophene)}, journal = {Materials Letter}, volume = {61}, number = {25}, year = {2007}, month = {OCT}, pages = {4687-4689}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Two kinds of poly(3-hexylthiophene) films with identical chemical compositions are prepared. One of the films is obtained by electropolymerization of 3-hexylthiophene (as-grown film) and the other is prepared by casting a solution dissolving the as-grown film (cast film). A clear difference is found in the mobility vs. doping level plots between the as-grown and cast films and its reason is discussed. (c) 2007 Elsevier B.V. All rights reserved.

}, keywords = {mobility, poly(3-hexylthiophene), swelling, thin film, transport mechanism}, issn = {0167-577X}, doi = {10.1016/j.matlet.2007.03.010}, author = {Jiang, Xiaoqing and Harima, Yutaka and Patil, Rahul} } @article { ISI:000269470200028, title = {Influence of dopant ions on properties of conducting polypyrrole and its electrocatalytic activity towards methanol oxidation}, journal = {Synthetic Metals}, volume = {159}, number = {15-16}, year = {2009}, month = {AUG}, pages = {1682-1688}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

The polypyrrole (PPy) films were deposited on vacuum metallized substrates by electro-oxidation of pyrrole monomer. These electrodes were then modified with a range of metal halides having different electronegativities. The modified polypyrrole electrodes were employed to investigate electrocatalytic activity towards methanol electrochemical oxidation by means of cyclic voltammetry in 0.1 M HClO(4) as supporting electrolyte. It was found that the electronegativity of the dopant ion incorporated in the PPy film governs the electrocatalytic activity towards methanol oxidation. Among different dopant anions used in the present work, the PPy doped with zirconium chloride gave the highest anodic current of 10 mA cm(-2) at the oxidation potential of methanol. Electrical property and the charge created due to doping in the polymers were measured using X-ray photoelectron spectroscopy (XPS) and Electron spin resonance spectroscopy (ESR). Electrocatalytic activity of the modified electrodes was correlated with various factors obtained from different polymer characterization experiments. The results were explained on the basis of the charge-transfer efficiency at the electrode I electrolyte interface, which was associated with the acceptor state created by the dopant in the semi-conducting polymer. (C) 2009 Elsevier B.V. All rights reserved.

}, keywords = {charge transfer, electrocatalyst, ESR, Metal halide dopant, Methanol oxidation, polypyrrole, XPS}, issn = {0379-6779}, doi = {10.1016/j.synthmet.2009.05.007}, author = {Adhikari, Arindam and Radhakrishnan, S. and Patil, Rahul} } @article { ISI:000308970100011, title = {CVD synthesis of highly graphitized single-walled carbon nanotubes using nitrogen-pretreated Fe-Mo/MgO catalyst}, journal = {Chemistry Letters}, volume = {41}, number = {9}, year = {2012}, month = {SEP}, pages = {871-873}, publisher = {CHEMICAL SOC JAPAN}, address = {1-5 KANDA-SURUGADAI CHIYODA-KU, TOKYO, 101-8307, JAPAN}, abstract = {

Single-walled carbon nanotubes (SWNTs) with highly graphitized structure were synthesized by thermal chemical vapor deposition using an improved nitrogen-pretreated Fe-Mo/MgO catalyst. The effects of nitrogen pretreatment of Fe-Mo/MgO on the structure and properties of SWNTs were studied by TEM, Raman spectroscopy, and TGA. The investigations revealed that the nitrogen pretreatment of the catalyst promoted the growth of SWNTs. It also enhanced the structural features and thermal properties of SWNTs.

}, issn = {0366-7022}, doi = {10.1246/cl.2012.871}, author = {Patil, Gaurav and Sarode, Chetan and Patil, Rahul and Gokhale, Suresh} }