@article { ISI:000373421700065,
	title = {Architecture of 2D MoS2 nanosheets and 3D CdMoS4 marigold flowers: consequence of annealing on field emission performance},
	journal = {Microporous and Mesoporous Materials},
	volume = {225},
	year = {2016},
	month = {MAY},
	pages = {573-579},
	publisher = {ELSEVIER SCIENCE BV},
	address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS},
	abstract = {<p>Herein, we report the field electron emission investigations on template free solvothermally synthesized layered MoS2 nanosheets as well as novel phase of CdMoS4 nanoflowers at the base pressure of similar to 1 x 10(-8) mbar. The turn-on field, threshold field and maximum emission current densities for both MoS2 and CdMoS4 are strongly influenced by thermal annealing in inert atmosphere. The turn on field, required to draw emission current density of 1 mu A/cm(2) is found to be 5.8 and 3.2 V/mu m for pristine and annealed MoS2 at 400 degrees C. In case of as prepared and annealed CdMoS4 sample the turn on field values are found to be similar to 6.2 and 5.0 V/mu m, respectively. The emission current versus time (I-t) plot measured at the preset current values of similar to 1 mu A for pristine and annealed sample indicates stable operation of the emitter. The emission current fluctuations for annealed sample are observed to be less as compared with the pristine sample due to conditioning of the emitter, thereby showing highly stable nature of emitter. Thus, the present result demonstrates the potential of annealed MoS2 nanosheets and CdMoS4 nanoflowers as an emerging materials for micro/nanoelectronics and flat panel field emission display applications. (C) 2016 Elsevier Inc. All rights reserved.</p>},
	keywords = {field emission, MoS2 and CdMoS4, Nanoflowers, nanosheets},
	issn = {1387-1811},
	doi = {10.1016/j.micromeso.2016.01.033},
	author = {Kadam, Sunil R. and Suryawanshi, Sachin R. and Panmand, Rajendra P. and Mate, Vivek R. and More, Mahendra A. and Late, Dattatray J. and Kale, Bharat B.}
}
@article {47340,
	title = {Architecture of NaFe(MoO4)2 as a novel anode material for rechargeable lithium and sodium ion batteries},
	journal = {Applied Surface Science},
	volume = {559},
	year = {2021},
	month = {SEP },
	pages = {149903},
	type = {Article},
	abstract = {<p>In recent decades, particular focus has been given to enhance the capacity of LIBs and SIBs either by developing new materials or by modifying existing materials. Hence, we have demonstrated a new anode material i.e. sodium iron molybdate [NaFe(MoO4)2] for both LIBs and SIBs. NaFe(MoO4)2 has been successfully synthesized by solid-state combustion technique and tested as a promising new anode material for both LIBs and SIBs. A detailed analysis of the crystal structure has been performed using DFT calculations. NaFe(MoO4)2 crystallizes in the monoclinic phase with the space group C2/c (\#15). FESEM also shows highly crystalline monoclinic shaped crystals of micron size. When evaluated as an anode material for LIBs, NaFe(MoO4)2 electrode exhibited electrochemical capacity of 920 mAhg- 1 in the second cycle at the current density of 50 mAg-1. Though capacity decreases on further cycling, the coulombic efficiency was maintained at 99\% for 50 cycles. Significantly, a high discharge capacity of 100 mAhg- 1 was maintained at a very high rate of 1 Ag-1. On the other hand, we have also tested NaFe(MoO4)2 for SIBs which shows excellent reversible specific capacity i.e. 100 mAhg- 1 at the current density of 100 mAg-1 even after 500 cycles. This novel system has shown good stability for LIBs and SIBs which is hitherto unattempted.</p>},
	keywords = {Electrochemical study, lithium-ion battery, Morphology, NaFe(MoO4)2, Sodium-ion battery},
	issn = {0169-4332},
	doi = {10.1016/j.apsusc.2021.149903},
	author = {Tamboli, Asiya M. and Tamboli, Mohaseen S. and Praveen, C. S. and Dwivedi, Pravin Kumari and Karbhal, Indrapal and Gosavi, Suresh W. and Shelke, V, Manjusha and Kale, Bharat B.}
}
