@article { ISI:000326320000017, title = {Efficient, stable, and reusable silicoaluminophosphate for the one-pot production of furfural from hemicellulose}, journal = {ACS Catalysis}, volume = {3}, number = {10}, year = {2013}, month = {OCT}, pages = {2299-2303}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Development of stable, reusable, and water tolerant solid acid catalysts in the conversion of polysaccharides to give value-added chemicals is vital because catalysts are prone to undergo morphological changes during the reactions With the anticipation that silicoaluminophosphate (SAPO) catalysts will have higher hydrothermal stability, those were synthesized, characterized, and employed in a one-pot conversion of hemicellulose. SAPO-44 catalyst at 170 degrees C within 8 h could give 63\% furfural yield with 88\% mass balance and showed similar activity up to at least 8 catalytic cycles. The morphological studies revealed that SAPO catalysts having hydrophilic characteristics are stable under reaction conditions.

}, keywords = {furfural, Hemicellulose, hydrophilicity, SAPO, water-tolerant catalyst, zeolite}, issn = {2155-5435}, doi = {10.1021/cs400495j}, author = {Bhaumik, Prasenjit and Dhepe, Paresh Laxmikant} } @article { ISI:000334895800008, title = {Value addition to lignocellulosics and biomass-derived sugars: an insight into solid acid-based catalytic methods}, journal = {Journal of Chemical Sciences}, volume = {126}, number = {2, SI}, year = {2014}, note = {21st National Symposium on Catalysis (CATSYMP), CSIR Indian Inst Chem Technol, Hyderabad, INDIA, FEB 11-13, 2013}, month = {MAR}, pages = {373-385}, publisher = {Catalysis Soc India}, type = {Article, Proceedings Paper}, address = {C V RAMAN AVENUE, SADASHIVANAGAR, P B \#8005, BANGALORE 560 080, INDIA}, abstract = {

For the synthesis of important platform chemicals such as sugars (xylose and arabinose) and furans (furfural and 5-hydroxymethylfurfural (HMF)) from carbohydrates (hemicellulose and fructose) solid acid catalysts are employed. Similarly, over solid acid catalysts, conversion of lignin into aromatic monomers is performed. It is observed that in the dehydration of fructose, because of higher hydrothermal stability, silicoaluminophosphate (SAPO) catalysts give better activity (78\% HMF yield) compared with other solid acid catalysts (\<63\% HMF yield) at 175 degrees C. Particularly, SAPO-44 catalyst can be reused at least 5 times with marginal decrease in the activity. Zeolite, BUSY (Si/Al = 15) is active in the conversion of isolated (pure) hemicellulose to produce 41\% C-5 sugars in water. The catalyst is also active in the selective conversion of hemicellulose from bagasse to yield 59\% C-5 sugars. It is possible to obtain high yields of furfural (54\%) directly from bagasse if instead of water, Water+toluene solvent system is used. Depolymerization of lignin using HUSY catalyst produced aromatic monomers with 60\% yield at 250 degrees C. A detailed catalyst characterization study is performed to understand the correlation between catalyst activity and morphology. To understand the effect of impurities present in the substrate over solid acid catalysts, metal-exchange study is carried out.

}, keywords = {aromatic monomers, Biomass, furans, Hemicellulose, lignin, solid acid catalyst}, issn = {0974-3626}, author = {Bhaumik, Prasenjit and Deepa, Ayillath K. and Kane, Tanushree and Dhepe, Paresh Laxmikant} } @article { ISI:000354137000012, title = {Effects of careful designing of SAPO-44 catalysts on the efficient synthesis of furfural}, journal = {Catalysis Today}, volume = {251}, year = {2015}, note = {7th Tokyo Conference on Advanced Catalytic Science and Technology (TOCAT), Kyoto, JAPAN, JUN 01-06, 2014}, month = {AUG}, pages = {66-72}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Considering the growing importance of furfural, it is necessary to develop a robust solid acid catalyst for the conversion of xylan (hemicelluloses) into furfural in a one-pot method. In this study, the effects of various components (Si, Al and P) and crystallization time on the preparation of acidic materials and their properties are extensively described. It is seen that with the increase in crystallization time (0, 48, 96, 176 h) during the synthesis of silicoaluminophosphate (SAPO-44), materials morphology changes from amorphous to AFI to CHA and the best activity for furfural synthesis (82\%) from xylan was observed with SAPO-44 catalyst aged for 176 h. Since, acidity in the SAPO-44 is guided by the incorporation of Si in the ALPO framework, study on Si molar concentration (0.8, 1.0, 1.2, 1.4 and 1.6) in SAPO-44 was carried out and it was observed that SAPO-44 having 1.0 mole of Si content is the best catalyst for the xylan/xylose conversion to furfural. Catalyst structure-activity correlation is thoroughly defined with the help of several physico-chemical properties. (C) 2014 Elsevier B.V. All rights reserved.

}, keywords = {Biomass, furfural, Hemicellulose, SAPO-44, Xylose}, issn = {0920-5861}, doi = {10.1016/j.cattod.2014.10.042}, author = {Bhaumik, Prasenjit and Dhepe, Paresh Laxmikant} }