@article { ISI:000232775100003, title = {Green process for chlorine-free benzaldehyde from the solvent-free oxidation of benzyl alcohol with molecular oxygen over a supported nano-size gold catalyst}, journal = {Green Chemistry}, volume = {7}, number = {11}, year = {2005}, month = {OCT}, pages = {768-770}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Benzyl alcohol is oxidized selectively to benzaldehyde with high yield, with a little formation of benzylbenzoate, by molecular oxygen over a reusable nano-size gold catalyst supported on U3O8, MgO, Al2O3 or ZrO2 in the absence of any solvent.

}, issn = {1463-9262}, doi = {10.1039/b509003b}, author = {Choudhary, Vasant R. and Dhar, A. and Jana, Prabhas and Jha, Rani and Uphade, B. S.} } @article { ISI:000260944500007, title = {Nano-gold supported on Fe2O3: a highly active catalyst for low temperature oxidative destruction of methane green house gas from exhaust/waste gases}, journal = {Applied Catalysis A-General}, volume = {350}, number = {2}, year = {2008}, month = {NOV}, pages = {186-190}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

A number of nano-gold catalysts were prepared by depositing gold on different metal oxides (viz. Fe2O3, Al2O3, Co3O4, MnO2, CeO2, MgO, Ga2O3 and TiO2), using the homogeneous deposition precipitation (HDP) technique. The catalysts were evaluated for their performance in the combustion of methane (1 mol\% in air) at different temperatures (300-600 degrees C) for a GHSV of 51,000 h(-1). The supported nano-gold catalysts have been characterized for their gold loading (by ICP) and gold particle size (by TEM/HRTEM or XRD peak broadening). Among these nano-gold catalysts, the Au/Fe2O3 (Au loading = 6.1\% and Au particle size = 8.5 nm) showed excellent performance. For this catalyst, temperature required for half the methane combustion was 387 degrees C, which is lower than that required for Pd(1\%)/Al2O3 (400 degrees C) and Pt(1\%)/Al2O3 (500 degrees C) under identical conditions. A detailed investigation on the influence of space velocity (GHSV = 10,000-100,000 cm(3) g(-1) h(-1)) at different temperatures (200-600 degrees C) on the oxidative destruction of methane over the Au/Fe2O3 catalyst has also been carried out. The Au/Fe2O3 catalyst prepared by the HDP method showed much higher methane combustion activity than that prepared by the conventional deposition precipitation (DP) method. The XPS analysis showed the presence of Au in the different oxidation states (Au-0, Au1+ and Au3+) in the catalyst. (C) 2008 Elsevier B.V. All rights reserved.

}, keywords = {Au/Fe2O3, Deposition precipitation, Homogeneous deposition precipitation, Methane combustion, Supported nano-gold catalysts}, issn = {0926-860X}, doi = {10.1016/j.apcata.2008.08.008}, author = {Choudhary, Vasant R. and Patil, V. P. and Jana, Prabhas and Uphade, B. S.} } @article { ISI:000317558000024, title = {Epoxidation of styrene by t-butyl hydroperoxide over gold nanoparticles supported on Yb2O3: effect of gold deposition method, gold loading, and calcination temperature of the catalyst on its surface properties and catalytic performance}, journal = {Journal of Catalysis}, volume = {300}, year = {2013}, month = {APR}, pages = {217-224}, publisher = {ACADEMIC PRESS INC ELSEVIER SCIENCE}, address = {525 B ST, STE 1900, SAN DIEGO, CA 92101-4495 USA}, abstract = {

Surface properties and epoxidation performance of Au/Yb2O3 catalyst are influenced by the method of gold deposition [viz. deposition-precipitation (DP), homogeneous deposition-precipitation (HDP) or impregnation], gold loading (0.9-6.6 wt\%), and the catalyst calcination temperature (400-900 degrees C)]. The catalyst showed the best epoxidation performance when it was prepared by the HDP method and calcined at 500 degrees C. The Au/Yb2O3 catalyst even after calcination at 900 degrees C showed good activity and epoxide selectivity. Both Au-0 and Au3+ surface species were found in the catalyst calcined at 800 degrees C, but only Au-0 species were observed at the lower calcination temperatures (\<600 degrees C). The selectivity for styrene oxide increased continuously with the reaction temperature (from 75 degrees C to 97 degrees C) and time (1-5 h), indicating that styrene oxide did not undergo secondary reactions under these conditions. (C) 2013 Elsevier Inc. All rights reserved.

}, keywords = {Au/Yb2O3 catalyst, Epoxidation of styrene, gold nanoparticles, Styrene oxide, tert-Butyl hydroperoxide}, issn = {0021-9517}, doi = {10.1016/j.jcat.2013.01.002}, author = {Choudhary, Vasant R. and Dumbre, Deepa K. and Patil, N. S. and Uphade, B. S. and Bhargava, Suresh Kumar} }