@article { ISI:000263397900005, title = {Manipulation of magnetic nanostructures through low temperature metal-oxygen chemistry: Co/CoO exchange biased nanodonuts and Co nanotips}, journal = {Solid State Communications}, volume = {149}, number = {7-8}, year = {2009}, month = {FEB}, pages = {277-280}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Dense nanodonut and nanotip type morphologies are shown to self-evolve in Ultrathin cobalt films during growth under Vacuum, depending oil the level of oxygen incorporation and temperature. The nanodonut morphology forms at room temperature and the corresponding magnetic hysteresis shows exchange bias (similar to 35 Oe shift along the field axis), which is attributed to the presence of CoO and its exchange Coupling with cobalt. The morphology evolves into nanotip features with increase of growth temperature, with Concurrent elimination of the oxide component and exchange bias. (C) 2008 Elsevier Ltd. All rights reserved.

}, keywords = {Co/CoO, Magnetic film, self assembly, Vacuum evaporation}, issn = {0038-1098}, doi = {10.1016/j.ssc.2008.12.019}, author = {Phase, Deodatta and Choudhary, Ram Janay and Ganesan, V. and Reddy, V. Raghvendra and Gupta, Ajay and Selvi, N. and Kulkarni, Sneha and Ogale, Satishchandra} } @article { ISI:000333567300064, title = {MOF-derived crumpled-sheet-assembled perforated carbon cuboids as highly effective cathode active materials for ultra-high energy density Li-ion hybrid electrochemical capacitors (Li-HECs)}, journal = {Nanoscale}, volume = {6}, number = {8}, year = {2014}, month = {FEB}, pages = {4387-4394}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Lithium ion hybrid capacitors (Li-HECs) have attracted significant attention for use in next generation advanced energy storage technologies to satisfy the demand of both high power density as well as energy density. Herein we demonstrate the use of very high surface area 3D carbon cuboids synthesized from a metal-organic framework (MOF) as a cathode material with Li4Ti5O12 as the anode for high performance Li-HECs. The energy density of the cell is similar to 65 W h kg(-1) which is significantly higher than that achievable with commercially available activated carbon (similar to 36 W h kg(-1)) and a symmetric supercapacitor based on the same MOF-derived carbon (MOF-DC similar to 20 W h kg(-1)). The MOF-DC/Li4Ti5O12 Li-HEC assembly also shows good cyclic performance with similar to 82\% of the initial value (similar to 25 W h kg(-1)) retained after 10 000 galvanostatic cycles under high rate cyclic conditions. This result clearly indicates that MOF-DC is a very promising candidate for future P-HEVs in a Li-HEC configuration.

}, issn = {2040-3364}, doi = {10.1039/c4nr00025k}, author = {Banerjee, Abhik and Upadhyay, Kush Kumar and Puthusseri, Dhanya and Aravindan, Vanchiappan and Madhavi, Srinivasan and Ogale, Satishchandra} } @article {43595, title = {Minute-made activated porous carbon from agro-waste for Li-ion battery anode using a low power microwave oven}, journal = {Electrochimica ACTA}, volume = {212}, year = {2016}, month = {SEP}, pages = {535-544}, abstract = {We demonstrate a very simple, cost-effective and superfast process for making Li-ion battery (LIB) anode grade carbon from agro-waste in the form of sugarcane bagasse using a low power microwave system. Activation of this bagasse derived carbon is carefully optimized by using various weight ratios of KOH to obtain the desired properties of functional carbon in terms of porosity and electrical conductivity. Low equivalent series resistance (ESR), low charge transfer resistance with good electrical conductivity, and optimum porosity for efficient ion diffusion make this carbon a good candidate for Li-ion battery anode material rendering a reversible capacity of 757 mAhg (1) at a current density of 100 mAg (1) and a good cycling performance at high current rates. (C) 2016 Elsevier Ltd. All rights reserved.}, doi = {10.1016/j.electacta.2016.07.011}, author = {Agarkar, Shruti and Yadav, Poonam and Fernandes, Rohan and Kothari, Dushyant and Suryawanshi, Anil and Ogale, Satishchandra} } @article {48803, title = {Mitigating dendrite formation on a Zn electrode in aqueous zinc chloride by the competitive surface chemistry of an imidazole additive}, journal = {ACS Applied Materials and Interfaces}, volume = {15}, year = {2023}, month = {MAY}, pages = {23093-23103}, type = {Article}, abstract = {

Electrochemical energy storage systems are critical in several ways for a smooth transition from nonrenewable to renewable energy sources. Zn-based batteries are one of the promising alternatives to the existing state-of-the-art Li-ion battery technology, since Li-ion batteries pose significant drawbacks in terms of safety and cost-effectiveness. Zn (with a reduction potential of -0.76 V vs SHE) has a significantly higher theoretical volumetric capacity (5851 mAh/cm3) than Li (2061 mAh/cm3), and it is certainly far less expensive, safer, and more earth-abundant. The formation of dendrites, hydrogen evolution, and the formation of a ZnO passivation layer on the Zn anode are the primary challenges in the development and deployment of rechargeable zinc batteries. In this work, we examine the role of imidazole as an electrolyte additive in 2 M ZnCl2 to prevent dendrite formation during zinc electrodeposition via experimental (kinetics and imaging) and theoretical density functional theory (DFT) studies. To characterize the efficacy and to identify the appropriate concentration of imidazole, linear sweep voltammetry (LSV) and chronoamperometry (CA) are performed with in situ monitoring of the electrodeposited zinc. The addition of 0.025 wt \% imidazole to 2 M ZnCl2 increases the cycle life of Zn-symmetric cells cycled at 1 mA/cm2 for 60 min of plating and stripping dramatically from 90 to 240 h. A higher value of the nucleation overpotential is noted in the presence of imidazole, which suggests that imidazole is adsorbed at a competitively faster rate on the surface of zinc, thereby suppressing the zinc electrodeposition kinetics and the formation. X-ray tomography reveals that a short circuit caused by dendrite formation is the main plausible failure mechanism of Zn symmetric cells. It is observed that the electrodeposition of zinc is more homogeneous in the presence of imidazole, and its presence in the electrolyte also inhibits the production of a passivating coating (ZnO) on the Zn surface, thereby preventing corrosion. DFT calculations conform well with the stated experimental observations.

}, keywords = {dendrite, Density functional theory, exchange current density, Imidazole, X-ray computed tomography, zinc metal electrodeposition}, issn = {1944-8244}, doi = {10.1021/acsami.3c01310}, author = {Rana, Ashutosh and Thakare, Anup and Kumar, Nikhil and Mukherjee, Buddhadev and Torris, Arun and Das, Bidisa and Ogale, Satishchandra and Banerjee, Abhik} }