@article { ISI:000270363600029, title = {Enhanced conversion efficiency in dye-sensitized solar cells based on hydrothermally synthesized TiO2-MWCNT nanocomposites}, journal = {ACS Applied Materials \& Interfaces}, volume = {1}, number = {9}, year = {2009}, month = {SEP}, pages = {2030-2035}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

A 50 \% enhancement in the conversion efficiency (4.9-7.37 \%) is realized in dye-sensitized solar cells Using hydrothermally synthesized TiO2-multiwalled carbon nanotube (MWCNT) nanocomposites as compared to hydrothermally synthesized TiO2 without MWCNT and Degussa P25. Several characterizations have been employed to reveal the nature of the modification imparted to the MWCNTs under hydrothermal processing conditions and the resulting TiO2-MWCNT conjugation through -COOH groups. Efficient charge transfer In the nanocomposite and efficient electron transport by MWCNT (significantly higher Incident-photon-to-current conversion efficiency) are suggested to be the possible reasons for the enhancement.

}, keywords = {Carbon nanotubes, charge transfer, Dye-sensitized solar cells, Hybrid composite, hydrothermal}, issn = {1944-8244}, doi = {10.1021/am900396m}, author = {Muduli, Subas and Lee, Wonjoo and Dhas, Vivek V. and Mujawar, Sarfraj and Dubey, Megha and Vijayamohanan, K. and Han, Sung-Hwan and Ogale, Satishchandra} } @article { ISI:000275706100023, title = {Elucidation of the role of hexamine and other precursors in the formation of magnetite nanorods and their stoichiometry}, journal = {Physical Chemistry Chemical Physics}, volume = {12}, number = {13}, year = {2010}, month = {FEB}, pages = {3246-3253}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Hexamine is known to assist anisotropic growth of metal oxides and the same is also found to be true for magnetite nanosynthesis. In this work we elucidate the role of hexamine and other precursors in the formation of magnetite nanorods by the hydrothermal route and their stoichiometry. Various others hydrolyzing agents such as sodium hydroxide (NaOH), sodium hydroxide + hexamine, ammonia (NH(3)), ammonia + formaldehyde are also studied. The synthesized nanoparticles are characterized with the help of various techniques such as X-ray diffraction (XRD), FT-IR spectroscopy, UV-VIS-NIR spectroscopy, transmission electron microscopy (TEM), Mossbauer spectroscopy and SQUID magnetization measurements. It is found that only when ferric chloride, ferrous ammonium sulfate (FAS) and hexamine are used, well defined nanorods are formed. When sodium hydroxide and hexamine are used as a hydrolyzing system nearly spherical nanoparticles with small size (similar to 13 nm) are formed, as compared to the case of sodium hydroxide alone which leads to bigger cube like nanoparticles. Interestingly the decomposition products of hexamine do not lead to nanorod formation. Thus, slow decomposition of hexamine at elevated temperature and the consequent slow rise in pH is the key to the anisotropic growth of the iron oxide system.

}, issn = {1463-9076}, doi = {10.1039/b917407a}, author = {Singh, Hema and Bhagwat, Shrikant and Jouen, Samuel and Lefez, Benoit and Athawale, Anjali A. and Hannoyer, Beatrice and Ogale, Satishchandra} } @article { ISI:000299292600009, title = {Enhanced piezoresponse of electrospun PVDF mats with a touch of nickel chloride hexahydrate salt}, journal = {Nanoscale}, volume = {4}, number = {3}, year = {2012}, month = {FEB}, pages = {752-756}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

PVDF nanofibers are prepared using electrospinning. The effect of addition of a hydrated salt, nickel chloride hexahydrate (NiCl2 center dot 6H(2)O), on the phase formation is examined. Addition of the hydrated salt (NC) is found to enhance the polar beta phase by about 30\%. The peak to peak piezo-voltage generated for PVDF NC is almost 0.762 V, a factor of 3 higher than that for PVDF. The fiber mats exhibit a significantly enhanced dynamic strain sensor response. The voltage generated per unit micro-strain developed during the free vibration test for PVDF was 0.119 mV whereas it was 0.548 mV for PVDF NC, exhibiting a non-linearly enhanced performance vis a vis the increase in the beta phase component.

}, issn = {2040-3364}, doi = {10.1039/c2nr11841f}, author = {Dhakras, Dipti and Borkar, Vivek and Ogale, Satishchandra and Jog, Jyoti Prakash} } @article { ISI:000334898800032, title = {Electronically and catalytically functional carbon cloth as a permeable and flexible counter electrode for dye sensitized solar cell}, journal = {Electrochimica Acta}, volume = {123}, year = {2014}, month = {MAR}, pages = {248-253}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

In this work we demonstrate that a conducting carbon cloth obtained by one-step pyrolysis of easily available cellulose fabric competes favorably with the commonly employed expensive platinum/FTO system as a counter electrode for dye sensitized solar cell (DSSC). In view of the low carbonization temperature (1000 degrees C) which forbids full graphitization, the nature of carbon in this case is represented by topologically randomly assembled nanoscale graphene units (turbostratic carbon). This morphology has high density of edge states and oxygen containing surface groups rendering multitude of catalytic sites for the reduction of I-3(-). Moreover the cloth is permeable to the dye and/or liquid electrolyte and its absorption properties also help retain the electrolyte. A fairly high efficiency of 5.8\% is achieved using such cloth as a counter electrode as against 7\% with the conventional Pt/FTO system. Moreover, the permeable property of the cloth eliminates a complete step of drilling hard TCO substrates for final dispensing of electrolyte into the device and the sealing process is also facile. In fact even the dye can be dispensed through the cloth. Finally, the flexibility of the carbon cloth can adapt easily to flexible/wearable DSSC designs. (C) 2014 Elsevier Ltd. All rights reserved.

}, keywords = {conducting carbon cloth, counter electrode, DSSC, without drilling}, issn = {0013-4686}, doi = {10.1016/j.electacta.2013.12.175}, author = {Tathavadekar, Mukta and Biswal, Mandakini and Agarkar, Shruti A. and Giribabu, Lingamallu and Ogale, Satishchandra} } @article { ISI:000337783800074, title = {Enhanced capacitance retention in a supercapacitor made of carbon from sugarcane bagasse by hydrothermal pretreatment}, journal = {Energy \& Fuels}, volume = {28}, number = {6}, year = {2014}, month = {JUN}, pages = {4233-4240}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

A unique morphology-controlling protocol involving hydrothermal preprocessing before pyrolysis is presented to convert cellulosic waste in the form of sugarcane bagasse into three-dimensional (3D) interconnected, conducting, and high surface area carbon nanochannels. The large buffer spaces in such a porous carbon sample yield impressive electrochemical capacitance (C-sp) of 280 F/g at a current density of 1 A/g (and 275 F/g at 5 mV/s), with 72\% retention even at a very high current density of 20 A/g. In contrast, the non-hydrothermally treated sample exhibits a C-sp value of 180 F/g at 1 A/g and only 52\% retention at 20 A/g. The much better performance of the hydrothermally preprocessed bagasse-derived carbon (BHAC) can be ascribed to the solvent retention inside the buffer spaces created, negating the diffusional limitations of pore inaccessibility at higher scan rates. The BHAC has a high surface area of 1260 m(2)/g with a fairly good (11 wt \%) concentration of oxygen functionality. The material renders a good energy density of Wh/kg at a power density of 3.5 kW/kg and shows good cyclability of 90\% after 1000 charge/discharge cycles.

}, issn = {0887-0624}, doi = {10.1021/ef500342d}, author = {Wahid, Malik and Puthusseri, Dhanya and Phase, Deodatta and Ogale, Satishchandra} } @article { ISI:000327771500117, title = {Evaluation of n-type ternary metal oxide NiMn2O4 nanomaterial for humidity sensing}, journal = {Sensors and Actuators B-Chemical}, volume = {191}, year = {2014}, month = {FEB}, pages = {837-843}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Synthesis of mono-dispersed oleic acid (OA) capped NiMn2O4 (NMO) nanoparticles and their use for humidity sensing is reported. Oleic acid capped NMO (NMO-cOA) nanoparticles are synthesized from nickel oleate and manganese oleate complex. NiMn2O4 is obtained by removing oleic acid capping at 500 degrees C in air. X-ray diffraction analysis shows formation of pure NiMn2O4 phase which is also confirmed by HRTEM-SAED analysis. The TEM analysis also shows that the nanoparticles are nearly mono-dispersed. Doctor bladed films of NMO nanoparticles are seen to exhibit excellent humidity sensing property. The resistivity is seen to change by two orders with humidity change from 11\% RH to 92\% RH with fairly good linearity over the entire range. The response and recovery times are also fast. (C) 2013 Elsevier B.V. All rights reserved.

}, keywords = {Humidity, Impedance, Nanoparticles, NiMn2O4, Oleic acid, Sensor}, issn = {0925-4005}, doi = {10.1016/j.snb.2013.10.071}, author = {Gawli, Yogesh and Badadhe, Satish S. and Basu, Aniruddha and Guin, Debanjan and Shelke, Manjusha V. and Ogale, Satishchandra} }