@article { ISI:000230275100032, title = {Synthesis of bismuth oxide nanoparticles at 100 degrees C}, journal = {Materials Letters}, volume = {59}, number = {19-20}, year = {2005}, month = {AUG}, pages = {2523-2525}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

A simple gel to crystal conversion route has been followed for the preparation of ultrafine Bi2O3 particles at 80-100 degrees C under refluxing conditions. Freshly prepared bismuth hydroxide gel is allowed to crystallize under refluxing and stirring conditions for 6-12 h. Formation of nanocrystallites of Bi2O3 is confirmed by X-ray diffraction (XRD) study. The thermal decomposition of bismuth hydroxide yields Bi2O3 only at 400 degrees C. This shows the advantage of the present method. Transmission electron microscope (TEM) investigations revealed that the average particle size is 50 nm for these oven-dried powders. (c) 2005 Elsevier B.V All rights reserved.

}, keywords = {Ceramics, Chemical synthesis, Electron microscopy, Oxides, X-ray diffraction}, issn = {0167-577X}, doi = {10.1016/j.matlet.2005.03.037}, author = {Patil, M. M. and Deshpande, V. V. and Dhage, S. R. and Ravi, V.} } @article { ISI:000230877900020, title = {Synthesis of bismuth oxide nanoparticles by citrate gel method}, journal = {Ceramics International}, volume = {31}, number = {6}, year = {2005}, month = {JAN}, pages = {889-891}, publisher = {ELSEVIER SCI LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

A mixture of bismuth nitrate and citric acid solution is taken in 1: 1 molar ratio and heated on hot water bath. A gel is formed on evaporation of the water, which on decomposition at 400 degrees C produces nanocrystalline Bi2O3 particles. Formation of nanocrystallites of Bi2O3 is confirmed by X-ray diffraction (XRD) study. Transmission electron microscope (TEM) investigations revealed that the average particle size is 50 nm for these powders. (c) 2004 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

}, keywords = {Electron microscopy, powders : chemical preparation, X-ray methods}, issn = {0272-8842}, doi = {10.1016/j.ceramint.2004.09.002}, author = {Anilkumar, Mettu and Pasricha, R. and Ravi, V.} } @article { ISI:000227603500020, title = {Synthesis of bismuth oxide nanoparticles using bismuth nitrate and urea}, journal = {Ceramics International}, volume = {31}, number = {3}, year = {2005}, month = {JAN}, pages = {495-497}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

A mixture of bismuth nitrate and urea is taken in 1:5 molar ratio and heated on hot water bath. A precipitate is formed on evaporation of the water which on decomposition at 400 degrees C produces nanocrystalline Bi2O3 particles. Formation of nano crystallites of Bi2O3 is confirmed by X-ray diffraction (XRD) study. Transmission electron microscopy (TEM) investigations revealed for these powders an average particle size of 50 nm. (c) 2004 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

}, keywords = {calcination, Electron microscopy, X-ray methods}, issn = {0272-8842}, doi = {10.1016/j.ceramint.2004.006.013}, author = {Jha, Ratnesh Kumar and Pasricha, R. and Ravi, V.} } @article { ISI:000225588700025, title = {Synthesis of bismuth titanate by the urea method}, journal = {Materials Letters}, volume = {59}, number = {4}, year = {2005}, month = {FEB}, pages = {514-516}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

A simple urea precipitation route was adopted for the preparation of bismuth titanate (Bi4Ti3O12) powders. Stoichiometric quantities of BiCl3 and TiOCl2 were mixed with the required amount of urea (the ratio of total metal cations to urea is five), and the mixture was heated on a water bath. This leads to the formation of precipitate, which was decomposed at 973 K. The formation of bismuth titanate was observed on calcining powders at 973 K by X-ray diffraction studies. The average particle size is found to be 100 nm by microscopy. The room temperature dielectric constant is found to be 150 at 1 kHz. The hysteresis loop parameters were also obtained by home-built Sawer-Tower circuit. (C) 2004 Elsevier B.V. All rights reserved.

}, keywords = {Ceramics, Chemical synthesis, dielectric properties, ferroelectricity, X-ray diffraction}, issn = {0167-577X}, doi = {10.1016/j.matlet.2004.10.038}, author = {Anilkumar, Mettu and Dhage, S. R. and Ravi, V.} } @article { ISI:000225856600034, title = {Synthesis of Ce0.75Zr0.25O2 at 100 degrees C}, journal = {Ceramics International}, volume = {31}, number = {1}, year = {2005}, month = {JAN}, pages = {211-213}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

A simple gel to crystal conversion route has been used for the preparation of Ce0.75Zr0.25O2 phase at 80-100degreesC under refluxing conditions. Freshly prepared metal hydroxides gel from cerium and zirconium salt solution is allowed to crystallize under refluxing and stirring conditions for 4-10 h. Formation of nano crystallites of Ce0.75Zr0.25O2 is confirmed by X-ray diffraction (XRD). Transmission electron microscopy (TEM) investigations revealed the average particle size of these powders to be 5 nm. (C) 2004 Elsevier Ltd and Techna S.r.l. All rights reserved.

}, keywords = {CeO2, chemical preparation, Electron microscopy, powders, X-ray methods}, issn = {0272-8842}, doi = {10.1016/j.ceramint.2004.04.009}, author = {Dhage, S. R. and Gaikwad, S. R. and Muthukumar, P. and Ravi, V.} } @article { ISI:000226803200008, title = {Synthesis of fine particles of ZnO at 100 degrees C}, journal = {Materials Letters}, volume = {59}, number = {7}, year = {2005}, month = {MAR}, pages = {779-781}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

A simple gel to crystal conversion route has been followed for the preparation of fine ZnO at 80-100 degreesC under refluxing conditions. Freshly prepared zinc hydroxide gel is allowed to crystallize under refluxing and stirring conditions for 4-6 It. Formation of fine crystallites of ZnO is confirmed by X-ray diffraction (XRD) study. Transmission electron microscope (TEM) investigations revealed that the average particle size is 100 nm for these powders. (C) 2004 Elsevier B.V All rights reserved.

}, keywords = {Ceramics, Chemical synthesis, Electron microscopy, Oxides, X-ray diffraction}, issn = {0167-577X}, doi = {10.1016/j.matlet.2004.11.019}, author = {Dhage, S. R. and Pasricha, R. and Ravi, V.} } @article { ISI:000228510500005, title = {Synthesis of nanocrystalline Mn3O4 at 100 degrees C}, journal = {Materials Research Bulletin}, volume = {40}, number = {4}, year = {2005}, month = {APR}, pages = {605-609}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A simple gel to crystal conversion route has been followed for the preparation of nanocrystalline tetragonal Mn3O4 powders at 80-100 degrees C under refluxing conditions. Freshly prepared manganese hydroxide gel is allowed to crystallize under refluxing and stirring conditions for 4-6 h. Formation of nano crystallites of Mn3O4 is confirmed by X-ray diffraction (XRD) study. Transmission electron microscope (TEM) investigations revealed that the average particle size is 50 nm for these powders. (c) 2005 Elsevier Ltd. All rights reserved.

}, keywords = {Ceramics, Chemical synthesis, Electron microscopy, Oxides, X-ray diffraction}, issn = {0025-5408}, doi = {10.1016/j.materresbull.2005.01.009}, author = {Anilkumar, Mettu and Ravi, V.} } @article { ISI:000230338900015, title = {Synthesis of rutile from ATO and stearic acid}, journal = {Materials Letters}, volume = {59}, number = {21}, year = {2005}, month = {SEP}, pages = {2673-2675}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Nanocrystalline titanium dioxide in the rutile phase has been obtained from the solid state reaction between ammonium titanyl oxalate (ATO) and stearic acid at 400 degrees C in air. The fine powders of ATO and stearic acid are mixed well using acetone in an agate mortar and pestle for 2 h. This mixture (weight ratio of ATO to stearic acid \> 5) on heating at 400 degrees C produces rutile powders. For the ratios of ATO to stearic acid \< 5, a mixture of anatase and rutile phases is obtained. Pure ATO yields anatase phase on decomposition at 400 degrees C. These powders were characterized by X-ray diffraction (XRD), BET surface area measurements and transmission electron microscopy (TEM) studies. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {Ceramics, Chemical synthesis, Electron microscopy, Oxides, X-ray techniques}, issn = {0167-577X}, doi = {10.1016/j.matlet.2005.04.016}, author = {Patil, M. M. and Deshpande, V. V. and Deshpande, S. B. and Samuel, V. and Ravi, V.} } @article { ISI:000227164000044, title = {Synthesis of Sr0.5Ba0.5Nb2O6 by urea method}, journal = {Materials Letters}, volume = {59}, number = {8-9}, year = {2005}, month = {APR}, pages = {1053-1055}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

A precipitate was formed when an aqueous solution of SrCl2, BaCl2, NbF5 and urea in stoichiometric ratio (total metal cations to urea ratio is 5) is heated on a water bath.. This precipitate on decomposition at 750 degreesC yielded the nanocrystallites of ternary oxide, Sr0.5Ba0.5Nb2O6 (SBN) as confirmed by X-ray diffraction study (XRD). This is much lower temperature as compared to that prepared by traditional solid state method (1000 degreesC as reported for the formation of SBN ceramics. Transmission electron microscope (TEM) investigations revealed that the average particle size is 100 nm for the calcined powders. The room temperature dielectric constant at 1 kHz is found to be 1050. The ferroelectric hysteresis loop parameters of these samples were also studied. (C) 2004 Elsevier B.V. All rights reserved.

}, keywords = {Ceramics, Electron microscopy, ferroelectricity, Oxides}, issn = {0167-577X}, doi = {10.1016/j.matlet.2004.12.003}, author = {Dhage, S. R. and Pasricha, R. and Ravi, V.} } @article { ISI:000238624000017, title = {Synthesis of MgNb2O6 by coprecipitation}, journal = {Materials Research Bulletin}, volume = {41}, number = {7}, year = {2006}, month = {JUL}, pages = {1353-1356}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A simple coprecipitation technique was used successfully to synthesize fine powders of MgNb2O6 (MN) phase. An aqueous mixture of ammonium carbonate and ammonium hydroxide was used to precipitate Mg2+ and Nb5+ cations as carbonate and hydroxide respectively under basic conditions. This precipitate on heating at 750 degrees C produced MN powders. For comparison MN powders were prepared by the traditional solid state method. The phase content and the lattice parameters were studied by powder X-ray diffraction (XRD). Particle size and morphology of the particles were studied by scanning electron microscopy (SEM). (C) 2006 Elsevier Ltd. All rights reserved.

}, keywords = {Ceramics, Chemical synthesis, Electron microscopy, electronic materials, X-ray diffraction}, issn = {0025-5408}, doi = {10.1016/j.materresbull.2005.12.009}, author = {Navale, S. C. and Gaikwad, A. B. and Ravi, V.} } @article { ISI:000248175000038, title = {Synthesis of La0.7Sr0.3MnO3 at 800 degrees C using citrate gel method}, journal = {Ceramics International}, volume = {33}, number = {6}, year = {2007}, month = {AUG}, pages = {1129-1132}, publisher = {ELSEVIER SCI LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

Manganite systems have been of considerable interest in the recent past due to their potential to operate in wide property range and also to serve as effective magnetic sensing and storing devices when synthesized using stringent conditions. We report a novel citrate gel method, in which La0.7Sr0.3MnO3 system has been synthesized at temperature 800 degrees C (LSMO800) with the synthesis duration is 6 h. The results have been compared with the sample synthesized at 1050 degrees C (LSMO1050). The synthesized bulk polycrystalline sample shows single-phase nature with the increase in particle size from similar to 50 nm to 300 nm with the increase in the sintering temperature. The magnetization data for LSMO800 shows well-defined hysteresis with saturation magnetization at around 1800 Oe and Curie temperature at 360 K, which is slightly lower than that of LSMO1050, which is 375 K. The results can be well attributed to the grain boundary effects. (C) 2006 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

}, keywords = {Ceramics, Citrate gel method, CMR, Oxides}, issn = {0272-8842}, doi = {10.1016/j.ceramint.2006.02.008}, author = {Ravi, V. and Kulkarni, S. D. and Samuel, V. and Kale, Sangeeta N. and Mona, J. and Rajgopal, R. and Daundkar, A. and Lahoti, P. S. and Joshi, Rakesh S.} } @article { ISI:000252408000048, title = {Synthesis of LSMO at low temperature by novel hydroxide precursor technique}, journal = {Materials Letters}, volume = {62}, number = {3}, year = {2008}, month = {FEB}, pages = {527-529}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

A novel technique of mixing individual hydroxide is employed to prepare La0.65Sr0.35MnO3 (LSMO) at low temperature. Freshly prepared lanthanum and manganese hydroxides are mixed thoroughly with strontium hydroxide in stoichiometric ratio and heated at different temperatures ranging from 100 to 500 degrees C for 6 h. At 500 degrees C, formation of La0.65Sr0.35MnO3 was confirmed by the X-ray diffraction studies (XRD). This is the lowest temperature so far reported in the literature. The particle size and morphology were investigated by scanning electron microscopy (SEM). (c) 2007 Elsevier B.V. All rights reserved.

}, keywords = {Ceramics, Electron microscopy, La0.65Sr0.35MnO3, Oxides, Precipitation, X-ray diffraction}, issn = {0167-577X}, doi = {10.1016/j.matlet.2007.05.077}, author = {Gupta, U. N. and Muthurajan, H. and Kumar, H. H. and Rao, N. Koteswara and Gokhale, Suresh P. and Ravi, V.} }