@article { ISI:000281347500022, title = {Surface texture and specific adsorption sites of sol-gel synthesized anatase TiO2 nanoparticles}, journal = {Materials Research Bulletin}, volume = {45}, number = {10}, year = {2010}, month = {OCT}, pages = {1470-1475}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

The surface properties of sot-gel synthesized anatase titania (TiO2) nanoparticles are probed by sorptiometry, infrared absorption spectroscopy, UV-vis diffuse reflectance spectroscopy and high resolution transmission electron microscopy. The results reveal strong correlations of the surface area, porosity, pyridine adsorption capacity and strength, and catalytic methylbutynol decomposition activity. (C) 2010 Elsevier Ltd. All rights reserved.

}, keywords = {Catalytic properties, Nanostructures, Oxides, Sol-gel chemistry, X-ray diffraction}, issn = {0025-5408}, doi = {10.1016/j.materresbull.2010.06.026}, author = {Zaki, Mohamed I. and Mekhemer, Gamal A. H. and Fouad, Nasr E. and Jagadale, Tushar C. and Ogale, Satishchandra B.} } @article { ISI:000293419700042, title = {Selectivity tailoring in liquid phase oxidation over MWNT-Mn3O4 nanocomposite catalysts}, journal = {Journal of Physical Chemistry C}, volume = {115}, number = {31}, year = {2011}, month = {AUG}, pages = {15440-15448}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Highly selective multiwalled nanotubes (MWNT)-Mn3O4 nano-composite catalyst was designed for liquid phase oxidation of p-cresol, which gave highest selectivity of 90\% to the first step oxidation product, p-hydroxy benzyl alcohol. Mn3O4 nanoparticles and MWNT-Mn3O4 nanocomposites were synthesized by coprecipitation route using mixed precursors under controlled conditions. The phase purity of Mn3O4 and the formation of MWNT-Mn3O4 nanocomposites were confirmed by X-ray diffraction, Raman spectroscopy, and X-ray photoelectron spectroscopy. High-resolution transmission electron microscopy revealed the selective exposure of (101) and (001) planes of Mn3O4 nanoparticles in the MWNT-Mn3O4 composite, while lowering in oxidizing capacity of MWNT-Mn3O4 nanocomposite confirmed by cyclic voltametry was due to incorporation of electron rich MWNT. Thus, selectivity tuning of the new material (MWNT-Mn3O4 nanocomposite) was found to be due to alteration in both geometric as well as electronic properties. A plausible reaction pathway also has been proposed involving the predominant role of nucleophilic lattice oxygen (O2-) species due to exposure of particular crystal planes giving highest selectivity to p-hydroxy benzyl alcohol.

}, issn = {1932-7447}, doi = {10.1021/jp203318n}, author = {Biswal, Mandakini and Dhas, Vivek V. and Mate, Vivek R. and Banerjee, Abhik and Pachfule, Pradip and Agrawal, Kanika L. and Ogale, Satishchandra B. and Rode, Chandrashekhar V.} } @article { ISI:000293213600025, title = {Shape preserving chemical transformation of ZnO mesostructures into anatase TiO2 mesostructures for optoelectronic applications}, journal = {Energy \& Environmental Science}, volume = {4}, number = {8}, year = {2011}, month = {AUG}, pages = {2835-2839}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

In this work we report on the synthesis of various ZnO mesostructures (rods, spheres, flakes and flower-like morphologies) by hydrothermal and co-precipitation methods and their remarkable and complete transformation into anatase TiO2 mesostructures with nominally similar shapes using controlled low temperature TiCl4 treatment. Various techniques are used to demonstrate the phase purity and morphology details. Based on the careful examination of the transformation of ZnO rods into TiO2 tubes we suggest a mechanism which embodies initial formation of a thin TiO2 shell on the ZnO surface by ion exchange (Ti4+-Zn2+) followed by Zn diffusion through the shell and its oxidation on the surface. We used these converted TiO2 mesostructures for light harvesting in Dye Sensitized Solar Cells (DSSCs) to enhance the conversion efficiency. It is shown that DSSCs made using a doctor bladed film of TiO2 nanoparticles with an overlayer of TiCl4 treated ZnO flowers yield a solar cell efficiency of 6.9\% which is considerably higher than that with only TiO2 nanoparticle film (5.4\%) of comparable thickness.

}, issn = {1754-5692}, doi = {10.1039/c1ee01515j}, author = {Muduli, Subas and Game, Onkar S. and Dhas, Vivek V. and Yengantiwar, Ashish and Ogale, Satishchandra B.} } @article { ISI:000296306600025, title = {Strong electric field modulation of transport in PVDF/MWCNT nanocomposite near the percolation threshold}, journal = {Solid State Communications}, volume = {151}, number = {21}, year = {2011}, month = {NOV}, pages = {1612-1615}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A nanocomposite comprising of multiwalled carbon nanotubes (MWCNT) embedded in ferroelectric Poly(vinylidene fluoride) PVDF polymer matrix is examined for electric field induced transport modulation. The pulsed laser deposition (PLD) grown thin films of the nanocomposite with different MWCNT content were characterized. When used as a channel layer in a field effect transistor configuration, a strong electric field modulation of the transport was realized just below the percolation threshold. We believe that this nanocomposite non-percolating channel concept can provide several opportunities for FET devices for organic electronics. (C) 2011 Elsevier Ltd. All rights reserved.

}, keywords = {Field effect device, pulsed laser deposition, PVDF, Scanning tunneling microscopy}, issn = {0038-1098}, doi = {10.1016/j.ssc.2011.07.018}, author = {Chanmal, Chetan and Deo, Meenal S. and Rana, Abhimanyu and Jog, Jyoti Prakash and Ogale, Satishchandra B.} } @article { ISI:000296659000032, title = {Strong photo-response in a flip-chip nanowire p-Cu2O/n-ZnO junction}, journal = {Nanoscale}, volume = {3}, number = {11}, year = {2011}, month = {OCT}, pages = {4706-4712}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Cu2O nanoneedles are synthesized on a copper substrate by a simple anodization and reducing ambient annealing protocol. ZnO nanorods are grown on ITO coated glass by a low temperature chemical route. The electronic and photo-response properties of the p-Cu2O/n-ZnO flip-chip heterojunction are then studied and analyzed. We show that the I-V characteristic is rectifying and the junction exhibits a good photoresponse (similar to 120\% under 1 V reverse bias) under AM 1.5 (1 Sun) illumination. This nano-heterojunction photo-response is far stronger as compared to that of a pulsed laser deposited thin film p-Cu2O/n-ZnO heterojunction, which can be attributed to higher junction area in the former case.

}, issn = {2040-3364}, doi = {10.1039/c1nr10665a}, author = {Deo, Meenal S. and Mujawar, Sarfraj and Game, Onkar S. and Yengantiwar, Ashish and Banpurkar, Arun G. and Kulkarni, Sneha and Jog, Jyoti Prakash and Ogale, Satishchandra B.} } @article { ISI:000350573400013, title = {Starch (Tapioca) to carbon dots: an efficient green approach to an on-off-on photoluminescence probe for fluoride ion sensing}, journal = {Analyst}, volume = {140}, number = {6}, year = {2015}, month = {FEB}, pages = {1837-1841}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Photoluminescent carbon dots of 4-5 nm size were prepared from starch (Tapioca Sago) through a solution method under mild conditions. The as-prepared carbon dots were used as photoluminescence probes for highly anion selective fluoride ion detection in aqueous solutions. A ready-to-use device is also demonstrated.

}, issn = {0003-2654}, doi = {10.1039/c4an02340d}, author = {Basu, Aniruddha and Suryawanshi, Anil and Kumawat, Begraj and Dandia, Anshu and Guin, Debanjan and Ogale, Satishchandra B.} } @article { ISI:000373619000021, title = {Synthesis, microstructure, optical and field emission studies of iron vanadium oxide nanosheets}, journal = {Journal of Physics D-Applied Physics}, volume = {49}, number = {14}, year = {2016}, month = {APR}, pages = {145301}, publisher = {IOP PUBLISHING LTD}, address = {TEMPLE CIRCUS, TEMPLE WAY, BRISTOL BS1 6BE, ENGLAND}, abstract = {

We report a single step growth of thin graphene-like, densely packed FeV3O8 (FVO) nanosheets on silicon substrates via facile hydrothermal synthesis. These nanosheets have dimensions of a few microns with thin edges, offering very high aspect ratio. These FVO nanosheets exhibit excellent field emission behaviour with low turn on and threshold voltages of 1.3 V mu m(-1) and 1.7 V mu m(-1), respectively. The corresponding emitter delivers high emission current density of (similar to 1.650 mA cm(-2)) at fairly low applied field (similar to 4.00 V mu m(-1)).

}, keywords = {FeV3O8, field emission, nanosheets}, issn = {0022-3727}, doi = {10.1088/0022-3727/49/14/145301}, author = {Badadhe, Satish S. and Suryawanshi, Sachin R. and Naphade, Rounak A. and Chaudhary, Minakshi V. and More, Mahendra A. and Shelke, Manjusha V. and Ogale, Satishchandra B.} }