@article { ISI:000243157600086, title = {Physical manipulation of biological and chemical syntheses for nanoparticle shape and size control}, journal = {Applied Physics Letters}, volume = {89}, number = {26}, year = {2006}, month = {DEC}, pages = {Article No. 263105}, publisher = {AMER INST PHYSICS}, type = {Article}, address = {CIRCULATION \& FULFILLMENT DIV, 2 HUNTINGTON QUADRANGLE, STE 1 N O 1, MELVILLE, NY 11747-4501 USA}, abstract = {

A nanosynthesis scheme is demonstrated which renders excellent control of nanoparticle shape, size, and dispersity in a solution based synthesis process. The scheme, termed as percolative microcavity synthesis, involves the use of a granular medium with percolative microcavities which facilitate nearly similar grain size/shape dependent reaction zones limiting intrinsic growth inhomogeneities, enabling particle size/shape control. The viability of the process is demonstrated for the synthesis of gold nanoparticles by a plant extract based biological method as well as a chemical method. (c) 2006 American Institute of Physics.

}, issn = {0003-6951}, doi = {10.1063/1.2424272}, author = {Ogale, Satishchandra B. and Ahmad, Absar and Pasricha, R. and Dhas, Vivek V. and Syed, A.} } @article { ISI:000342328300031, title = {Pulsed laser-deposited MoS2 thin films on W and Si: field emission and photoresponse studies}, journal = {ACS Applied Materials \& Interfaces}, volume = {6}, number = {18}, year = {2014}, month = {SEP}, pages = {15881-15888}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

We report field electron emission investigations on pulsed laser-deposited molybdenum disulfide (MoS2) thin films on W-tip and Si substrates. In both cases, under the chosen growth conditions, the dry process of pulsed laser deposition (PLD) is seen to render a dense nanostructured morphology of MoS2, which is important for local electric field enhancement in field emission application. In the case of the MoS2 film on silicon (Si), the turn-on field required to draw an emission current density of 10 mu A/cm(2) is found to be 2.8 V/mu m. Interestingly, the MoS2 film on a tungsten (W) tip emitter delivers a large emission current density of similar to 30 mA/cm(2) at a relatively lower applied voltage of similar to 3.8 kV. Thus, the PLD-MoS2 can be utilized for various field emission-based applications. We also report our results of photodiode-like behavior in (n- and p- type) Si/PLDMoS2 heterostructures. Finally we show that MoS2 films deposited on flexible kapton substrate show a good photoresponse and recovery. Our investigations thus hold great promise for the development of PLD MoS2 films in application domains such as field emitters and heterostructures for novel nanoelectronic devices.

}, keywords = {field emission, MoS2, photodiode heterostructures, pulsed laser deposition, thin film}, issn = {1944-8244}, doi = {10.1021/am503464h}, author = {Late, Dattatray J. and Shaikh, Parvez A. and Khare, Ruchita T. and Kashid, Ranjit V. and Chaudhary, Minakshi V. and More, Mahendra A. and Ogale, Satishchandra B.} } @article { ISI:000368563000067, title = {Pt- and TCO-free flexible cathode for DSSC from highly conducting and flexible PEDOT paper prepared via in situ interfacial polymerization}, journal = {ACS Applied Materials \& Interfaces}, volume = {8}, number = {1}, year = {2016}, month = {JAN}, pages = {553-562}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Here, we report the preparation of a flexible, free-standing, Pt- and TCO-free counter electrode in dye-sensitized solar cell (DSSC)-derived from polyethylenedioxythiophene (PEDOT)-impregnated cellulose paper. The synthetic strategy of making the thin flexible PEDOT paper is simple and scalable, which can be achieved via in situ polymerization all through a roll coating technique. The very low sheet resistance (4 Omega/square) obtained from a film of 40 mu m thick PEDOT paper (PEDOT-p-5) is found to be superior to the conventional fluorine-doped tin oxide (FTO) substrate. The high conductivity (357 S/cm) displayed by PEDOT-p-5 is observed to be stable under ambient conditions as well as flexible and bending conditions. With all of these features in place, we could develop an efficient Pt- and TCO-free flexible counter electrode from PEDOT-p-5 for DSSC applications. The catalytic activity toward the tri-iodide reduction of the flexible electrode is analyzed by adopting various electrochemical methodologies. PEDOT-p-5 is found to display higher exchange current density (7.12 mA/cm(2)) and low charge transfer resistance (4.6 Omega) compared to the benchmark Pt-coated FTO glass (2.40 mA/cm(2) and 9.4 Omega, respectively). Further, a DSSC fabricated using PEDOT-p-5 as the counter electrode displays a comparable efficiency of 6.1\% relative to 6.9\% delivered by a system based on Pt/FTO as the counter electrode.

}, keywords = {counter electrode, dye-sensitized solar cell, flexible and thin devices, impedance analysis, interfacial polymerization, polyethylenedioxythiophene}, issn = {1944-8244}, doi = {10.1021/acsami.5b09579}, author = {Anothumakkool, Bihag and Agrawal, Ishita and Bhange, Siddheshwar N. and Soni, Roby and Game, Onkar S. and Ogale, Satishchandra B. and Kurungot, Sreekumar} }