@article { ISI:000243157600086, title = {Physical manipulation of biological and chemical syntheses for nanoparticle shape and size control}, journal = {Applied Physics Letters}, volume = {89}, number = {26}, year = {2006}, month = {DEC}, pages = {Article No. 263105}, publisher = {AMER INST PHYSICS}, type = {Article}, address = {CIRCULATION \& FULFILLMENT DIV, 2 HUNTINGTON QUADRANGLE, STE 1 N O 1, MELVILLE, NY 11747-4501 USA}, abstract = {

A nanosynthesis scheme is demonstrated which renders excellent control of nanoparticle shape, size, and dispersity in a solution based synthesis process. The scheme, termed as percolative microcavity synthesis, involves the use of a granular medium with percolative microcavities which facilitate nearly similar grain size/shape dependent reaction zones limiting intrinsic growth inhomogeneities, enabling particle size/shape control. The viability of the process is demonstrated for the synthesis of gold nanoparticles by a plant extract based biological method as well as a chemical method. (c) 2006 American Institute of Physics.

}, issn = {0003-6951}, doi = {10.1063/1.2424272}, author = {Ogale, Satishchandra B. and Ahmad, Absar and Pasricha, R. and Dhas, Vivek V. and Syed, A.} } @article { ISI:000250735600035, title = {Fungus-based synthesis of chemically difficult-to-synthesize multifunctional nanoparticles of CuAlO2}, journal = {Advanced Materials}, volume = {19}, number = {20}, year = {2007}, month = {NOV}, pages = {3295+}, publisher = {WILEY-V C H VERLAG GMBH}, type = {Article}, address = {PO BOX 10 11 61, D-69451 WEINHEIM, GERMANY}, abstract = {

Fungal nanosynthesis of ternary CuAlO2 phase is achieved at 50 degrees C. This phase is chemically difficult to synthesize at low temperatures because of the incompatible oxidation chemistry of Cu and Al. The synthesized protein-capped water-dispersible nanoparticles show blue luminescence and radio-frequency absorption (see figure).

}, issn = {0935-9648}, doi = {10.1002/adma.200602605}, author = {Ahmad, Absar and Jagadale, Tushar C. and Dhas, Vivek V. and Khan, Shadab and Patil, Shankar and Pasricha, Renu and Ravi, Venkat and Ogale, Satishchandra B.} } @article { ISI:000251153900031, title = {Impact of orientational distribution of adsorbing objects on dynamics of Random Sequential Ballistic Adsorption (RSBA) dynamics}, journal = {Surface Science}, volume = {601}, number = {21}, year = {2007}, month = {NOV}, pages = {5010-5015}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Recently, by proposing a new variant of Random Sequential Adsorption (RSA) namely Random Sequential Ballistic Adsorption (RSBA) model [Pradip B. Shelke, A.G. Banpurkar, S.B. Ogale, A.V. Limaye, Surf. Sci. 601 (2007) 274], we addressed the issue of adsorption dynamics of extended objects where the objects, upon adsorption, protrude outside the substrate. This study brought out the role of the arriving trajectory in the adsorption dynamics. In the present work the possible role of the orientational distribution of the arriving objects in the RSBA dynamics is investigated. The dynamics of RSBA of needles (line segments) is studied analytically and by computer simulation for different types of theta distributions of arriving needles, theta being the angle made by the arriving needle with normal to the substrate. Three types of theta distributions, namely a uniform distribution over the range (0, pi/2), a Gaussian distribution and a distribution uniform over the solid angle, are considered. Analytical treatment establishes that in all the three cases, the number n(t) of adsorbed objects at a late time t follows a power law n(t) similar to t(alpha), and the exponent a depends on the specifics of the theta distribution. In general, for distribution f(theta) proportional to theta(beta), for theta -\> 0, alpha is found to be 2/(beta + 3). The simulation results are in excellent agreement with the analytical findings and together they reveal that the orientational distribution of arriving objects has significant consequences for the Random Sequential Ballistic Adsorption (RSBA) process. (C) 2007 Elsevier B.V. All rights reserved.

}, keywords = {Adsorption, adsorption kinetics, Monte Carlo simulations, random sequential adsorption (RSA)}, issn = {0039-6028}, author = {Shelke, Pradip B. and Banpurkar, Arun G. and Ogale, Satishchandra B. and Limaye, A. V.} } @article { ISI:000243150300031, title = {Interface and defect structures in YBa(2)Cu(3)O(7-delta) and Nb : SrTiO(3) heterojunction}, journal = {Journal of Physics D-Applied Physics}, volume = {40}, number = {1}, year = {2007}, month = {JAN}, pages = {187-191}, publisher = {IOP PUBLISHING LTD}, type = {Article}, address = {TEMPLE CIRCUS, TEMPLE WAY, BRISTOL BS1 6BE, ENGLAND}, abstract = {

YBa(2)Cu(3)O(7-delta) thin films grown on a Nb-doped SrTiO(3) substrate by a pulsed laser deposition method have been fully characterized by scanning transmission electron microscopy Z- contrast imaging and electron energy loss spectroscopy techniques. The Nb distribution was found to be uniform and unchanged across the interface, ensuring a high quality p - n junction heterointerface. We first observed the coexistence of 124 and 125 YBCO defect structure phases, appearing as planar defects in a YBCO thin film. Dispersive Y(2)O(3) nanoparticles have also been observed in the thin film. The interaction of these defect structures and Y(2)O(3) nanoparticles is thought to be beneficial for pinning flux through the entire film thickness.

}, issn = {0022-3727}, doi = {10.1088/0022-3727/40/1/013}, author = {Fu, Lian-feng and Browning, Nigel D. and Ramadan, W. and Ogale, Satishchandra B. and Kundaliya, D. C. and Venkatesan, T.} } @article { ISI:000252511300009, title = {Low temperature synthesis of magnetite and maghemite nanoparticles}, journal = {Journal of Nanoscience and Nanotechnology}, volume = {7}, number = {12}, year = {2007}, month = {DEC}, pages = {4294-4302}, publisher = {AMER SCIENTIFIC PUBLISHERS}, type = {Article}, address = {26650 THE OLD RD, STE 208, VALENCIA, CA 91381-0751 USA}, abstract = {

We report on the synthesis of iron oxide nanoparticles below 100 degrees C by a simple chemical protocol. The uniqueness of the method lies in the use of Ferrous ammoniurn sulphate (in conjugation with FeCl3) which helps maintain the stability of Fe-2+ state in the reaction sequence thereby controlling the phase formation. Hexamine was added as the stabilizer. The nanoparticles synthesized at three different temperatures viz, 5 degrees, 27 degrees, and 95 degrees C are characterized by several techniques. Generally, when a mixture of Fe3+ and Fe2+ is added to sodium hydroxide, alpha-Fe2O3 (the anti-ferromagnetic phase) is formed after the dehydration process of the hydroxide. In our case however, the phases formed at all the three temperatures were found to be ferro (ferri) magnetic, implying modification of the formation chemistry due to the specifics of our method. The nanoparticles synthesized at the lowest temperature exhibit magnetite phase, while increase in growth temperature to 95 degrees C leads to the maghemite phase.

}, keywords = {low temperature synthesis, maghemite, magnetite, Nanoparticles}, issn = {1533-4880}, doi = {10.1166/jnn.2007.873}, author = {Bhagwat, Shrikant and Singh, Hema and Athawale, Anjali and Hannoyer, Beatrice and Jouen, Samuel and Lefez, Benoit and Kundaliya, Darshan and Pasricha, Renu and Kulkarni, Shailaja and Ogale, Satishchandra B.} } @article { ISI:000252284200102, title = {Anomalous microwave heating effects in Ce-doped La(0.7)Sr(0.3)MnO(3): possible role of grain boundary capacitative effects across cerium solubility limit}, journal = {Applied Physics Letters}, volume = {92}, number = {1}, year = {2008}, month = {JAN}, pages = {Article No. 012512}, publisher = {AMER INST PHYSICS}, type = {Article}, address = {CIRCULATION \& FULFILLMENT DIV, 2 HUNTINGTON QUADRANGLE, STE 1 N O 1, MELVILLE, NY 11747-4501 USA}, abstract = {

Ce-doped manganite bulk nanocompacts [La(0.7-x)Ce(x)Sr(0.3)MnO(3) (0 \< x \< 0.1)] are studied for their microwave heating properties at 2.45 GHz. The heating effect is found to be nonmonotonic as a function of cerium concentration, and anomalously large heating (burning) is observed for a small concentration window near x=0.03. The x-ray diffraction studies show signatures of CeO(2) phase in x\>0.03 samples. The various characterizations collectively point to the key role of the developing grain boundary CeO(2) layer which leads to highest capacitative intergrain-coupling and related charging-discharging effects when it is thinnest near the apparent Ce solubility limit of x similar to 0.03. (c) 2008 American Institute of Physics.

}, issn = {0003-6951}, doi = {10.1063/1.2827184}, author = {Kale, Sangeeta N. and Mona, J. and Lofland, S. E. and Kulkarni, S. D. and Ogale, Satishchandra B.} } @article { ISI:000256232900024, title = {Bacteria-mediated precursor-dependent biosynthesis of superparamagnetic iron oxide and iron sulfide nanoparticles}, journal = {Langmuir}, volume = {24}, number = {11}, year = {2008}, month = {JUN}, pages = {5787-5794}, publisher = {AMER CHEMICAL SOC}, type = {Article}, chapter = { }, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

The bacterium Actinobacter sp. has been shown to be capable of extracellularly synthesizing iron based magnetic nanoparticles, namely maghemite (gamma-Fe2O3) and greigite (Fe3S4) Under ambient conditions depending on the nature of precursors used. More precisely, the bacterium synthesized maghemite when reacted with ferric chloride and iron sulfide when exposed to the aqueous solution of ferric chloride-ferrous sulfate. Challenging the bacterium with different metal ions resulted in induction of different proteins, which bring about the specific biochemical transformations in each case leading to the observed products. Maghemite and iron sulfide nanoparticles show superparamagnetic characteristics as expected. Compared to the earlier reports of magnetite and greigite synthesis by magnetotactic bacteria and iron reducing bacteria, which take place strictly under anaerobic conditions, the present procedure offers significant advancement since the reaction occurs under aerobic condition. Moreover, reaction end products can be tuned by the choice of precursors used.

}, issn = {0743-7463}, doi = {10.1021/la704019p}, author = {Bharde, Atul A. and Parikh, Rasesh Y. and Baidakova, Marina and Jouen, Samuel and Hannoyer, Beatrice and Enoki, Toshiaki and Bhagavatula L. V. Prasad and Shouche, Yogesh S. and Ogale, Satishchandra B. and Sastry, Murali} } @article { ISI:000257737200004, title = {Carbon nano horn and bovine serum albumin hierarchical composite: towards bio-friendly superhydrophobic protein film surfaces}, journal = {Journal of Materials Chemistry}, volume = {18}, number = {29}, year = {2008}, month = {JUN}, pages = {3422-3425}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Highly hydrophilic glass substrates when coated with films of carbon nano horns dispersed in the ubiquitous protein bovine serum albumin display hydrophobic characteristics. Incidentally both the materials used to create the final hydrophobic surface are known to be highly bio-compatible. The features observed are accredited to the replication of the micro and nanoscale hierarchical structures of carbon nano horns in the final film composite.

}, issn = {0959-9428}, doi = {10.1039/b806777e}, author = {Jadhav, Anil D. and Ogale, Satishchandra B. and Bhagavatula L. V. Prasad} } @article { ISI:000253283700034, title = {Chemical inhomogeneity and mixed-state ferromagnetism in diluted magnetic semiconductor Co : TiO2}, journal = {Chemistry of Materials}, volume = {20}, number = {4}, year = {2008}, month = {FEB}, pages = {1344-1352}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Diluted magnetic semiconductors (DMS) are among the most intensely investigated materials in recent times in view of their great application potential. Yet, they are also the most controversial because of the possibility of extrinsic effects attributable to dopant solubility and clustering, point defects, incorporation of unintentional impurities, etc. This has highlighted the central role of materials chemistry in rendering a specific microstate and property response. In this work, we provide a combined window of high-resolution scanning transmission electron microscopy and electron energy-loss spectrometry, X-ray absorption (XAS)/X-ray magnetic circular dichroism (XMCD), and magnetization measurements on epitaxial rutile CoxTi1-xO2 (x = 0-0.06) system (the first discovered oxide-DMS, which continues to be controversial) grown at low temperature (400 degrees C) under different ambient atmospheres. The study brings out a mixed-state scenario of ferromagnetism involving intrinsic DMS (uniform dopant distribution at low dopant concentration) and coupled cluster magnetism, involving cobalt associations within the matrix at higher concentrations. We also show that by matrix valence control during growth, it is possible to realize a uniform embedded cluster state and the related coupled cluster magnetism.

}, issn = {0897-4756}, doi = {10.1021/cm702089z}, author = {Ogale, Satishchandra B. and Kundaliya, Darshan and Mehraeen, Shareghe and Fu, Lian-feng and Zhang, Shixiong and Lussier, Alexandre and Dvorak, Joe and Browning, Nigel D. and Idzerda, Yves and Venkatesan, Thirumalai} } @article { ISI:000252416000015, title = {Co : CdS diluted magnetic semiconductor nanoparticles: radiation synthesis, dopant-defect complex formation, and unexpected magnetism}, journal = {Chemistry of Materials}, volume = {20}, number = {2}, year = {2008}, month = {JAN}, pages = {440-446}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Incorporating a dopant into a nanoparticle is a nontrivial proposition in view of the size dependent surface versus bulk energy considerations and the intrinsic proximity of the surface to the interior, which facilitates migration to the surface. If realized and controlled, however, it can open up new avenues to novel nanomaterials. Some previous studies have shown the dopability of nanosystems but only with specific surface functionalization. Here, we demonstrate the successful dopant incorporation via a new route of pulsed high energy electron induced synthesis. We choose a system Co:CdS (dilutely cobalt doped cadmium sulfide) in view of the well-known application-worthy properties of CdS and the potential possibility of its conversion to a diluted magnetic semiconductor of interest to spintronics. By using various techniques, we show that matrix incorporation and uniform distribution of cobalt are realized in US nanocrystals without the need for additional chemical or physical manipulation. Optical and photoluminescence properties also support dopant incorporation. Interestingly, although magnetism is realized, it is weak, and it decreases at higher cobalt concentration. First principle density functional calculations are performed to understand this counterintuitive behavior. These calculations suggest that the introduction of parent cation or anion vacancies lead to magnetic moment reduction, albeit marginally. However, with some Co impurity fraction in the octahedral interstitial site inside the wurtzite cage, the magnetic moment drops down drastically. This study reveals that defect states may have an interesting role in dopant stabilization in nanosystems, with interesting system dependent consequences for the properties.

}, issn = {0897-4756}, doi = {10.1021/cm702118w}, author = {Bogle, Kashinath A. and Ghosh, Saurabh and Dhole, Sanjay D. and Bhoraskar, Vasant N. and Fu, Lian-feng and Chi, Miao-Fang and Browning, Nigel D. and Kundaliya, Darshan and Das, Gour P. and Ogale, Satishchandra B.} } @article { ISI:000261896400061, title = {Enhanced conversion efficiency in dye-sensitized solar cells based on ZnO bifunctional nanoflowers loaded with gold nanoparticles}, journal = {Applied Physics Letters}, volume = {93}, number = {24}, year = {2008}, month = {DEC}, pages = {Article No. 243108}, publisher = {AMER INST PHYSICS}, type = {Article}, address = {CIRCULATION \& FULFILLMENT DIV, 2 HUNTINGTON QUADRANGLE, STE 1 N O 1, MELVILLE, NY 11747-4501 USA}, abstract = {

The ZnO nanoflowers loaded with gold (Au) nanoparticles (NPs) are synthesized by a hydrothermal route using mixed precursors and controlled conditions. The dye-sensitized solar cells based on the ZnO nanoflowers with Au NPs show power conversion efficiency of 2.5\%, which is considerably higher than that of ZnO nanoflowers without Au NPs. Detailed characterizations are performed, presented, and discussed.

}, keywords = {crystal growth from solution, Gold, II-VI semiconductors, Nanocomposites, Nanoparticles, solar cells, wide band gap semiconductors, zinc compounds}, issn = {0003-6951}, doi = {10.1063/1.3049131}, author = {Dhas, Vivek V. and Muduli, Subas and Lee, Wonjoo and Han, Sung-Hwan and Ogale, Satishchandra B.} } @article { ISI:000259140700055, title = {N-doped TiO2 nanoparticle based visible light photocatalyst by modified peroxide sol-gel method}, journal = {Journal of Physical Chemistry C}, volume = {112}, number = {37}, year = {2008}, month = {SEP}, pages = {14595-14602}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

The peroxide gel route is employed to synthesize N-doped TiO2 nanoparticles (NP) at low temperature using titanium tetraisopropoxide, ethylmethylamine, and hydrogen peroxide as precursors. Structural studies show anatase phase in the undoped titania NPs as well as at 5 at. \% N-doped titania NPs, although with a degree of matrix disorder in the latter case. The annealing of N-doped titania NPs at different temperatures shows that above 400 degrees C nitrogen escapes the O-Ti-O matrix and at 500 degrees C the sample becomes crystalline. Transmission electron microscopy reveals that the particle size is in the range of 20-30 nm for the undoped TiO2 but only 5-10 nm for N-doped TiO2. At higher nitrogen concentration (10 at. \%) bubble-like agglomerates form. FTIR and photoluminescence quenching also confirm the incorporation of nitrogen in anatase TiO2. Optical properties reveal an extended tailing of the absorption edge toward the visible region upon nitrogen doping. X-ray photoelectron spectroscopy is used to examine the electronic state of doped nitrogen and the associated possible electronic modification of the TiO2 matrix. Under visible light irradiation the undoped TiO2 NPs do not show any significant photocatalytic activity, as expected; however, the 5 at. \% N-doped TiO2 NPs show excellent activity.

}, issn = {1932-7447}, doi = {10.1021/jp803567f}, author = {Jagadale, Tushar C. and Takale, Shrikant P. and Sonawane, Ravindra S. and Joshi, Hrushikesh M. and Patil, Shankar I. and Kale, Bharat B. and Ogale, Satishchandra B.} } @article { ISI:000253767100014, title = {Rapid phase-controlled microwave synthesis of nanostructured hierarchical tetragonal and cubic beta-In2S3 dandelion flowers}, journal = {Chemical Physics Letters}, volume = {452}, number = {4-6}, year = {2008}, month = {FEB}, pages = {301-305}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Phase controlled synthesis of hierarchical nanostructured beta-In2S3 dandelion flowers is realized by a rapid microwave solvothermal process using indium metal, nitric acid and thiourea as precursors. The tetragonal and cubic phases of the compound have been successfully and separately stabilized in the same type of dandelion morphology by using aqueous-mediated and methanol-mediated synthesis, respectively. The possible mechanism responsible for phase control is discussed. Optical properties of the flowers as well as their hydrogen generation capability by photodecomposition of H2S under visible light are also reported. (c) 2007 Elsevier B.V. All rights reserved.

}, issn = {0009-2614}, doi = {10.1016/j.cplett.2007.12.048}, author = {Naik, S. D. and Jagadale, Tushar C. and Apte, S. K. and Sonawane, S. and Kulkarni, M. V. and Patil, S. I. and Ogale, Satishchandra B. and Kale, B. B.} } @article { ISI:000252482800031, title = {Tuning the hydrophobic properties of silica particles by surface silanization using mixed self-assembled monolayers}, journal = {Journal of Colloid and Interface Science}, volume = {318}, number = {2}, year = {2008}, month = {FEB}, pages = {372-379}, publisher = {ACADEMIC PRESS INC ELSEVIER SCIENCE}, type = {Article}, address = {525 B ST, STE 1900, SAN DIEGO, CA 92101-4495 USA}, abstract = {

Here we describe a novel method of preparing hydrophobic silica particles (100-150 nm; water contact angle of dropcasted film ranging from 60 degrees to 168 degrees) by surface functionalization using different alkyltrichlorosilanes. During their preparation, the molecular surface roughness is also concurrently engineered facilitating a change in both the surface chemical composition and the geometrical microstructure to generate hierarchical structures. The water contact angle has been measured on drop-cast film surface. The enhancement in the water contact angle on 3D (curved) SAMs in comparison to that on 2D (planar) surface is discussed using the Cassie-Baxter equation. These silica particles can be utilized for many potential applications including selective adsorbents and catalysts, chromatographic supports and separators in microfluidic devices. (C) 2007 Elsevier Inc. All rights reserved.

}, keywords = {alkyltrichlorosilane, silanization, silica particles, superhydrophobicity}, issn = {0021-9797}, doi = {10.1016/j.jcis.2007.11.012}, author = {Kulkami, Sneha A. and Ogale, Satishchandra B. and Vijayamohanan, Kunjukrishanan P.} } @article { ISI:000263018200028, title = {Chemical bath deposition of CdS quantum dots on vertically aligned ZnO nanorods for quantum dots-sensitized solar cells}, journal = {Electrochemistry Communications}, volume = {11}, number = {1}, year = {2009}, month = {JAN}, pages = {103-106}, publisher = {ELSEVIER SCIENCE INC}, address = {360 PARK AVE SOUTH, NEW YORK, NY 10010-1710 USA}, abstract = {

Formation of US quantum dots (Q dots) on the vertically aligned ZnO nanorods electrode was carried out by chemical bath deposition. The diameter and thickness of ZnO nanorods are similar to 100-150 nm and similar to 1.6 mu m, respectively, and CdS Q dots on ZnO nanorods have a diameter of smaller than 15 nm. In application of the Q dots-sensitized solar cells, composite film exhibited a power conversion efficiency of 0.54\% under air mass 1.5 condition (80 mW/cm(2)), and incident-photon-to-current conversion efficiency showed 18.6\%. (c) 2008 Elsevier B.V. All rights reserved.

}, keywords = {Chemical bath deposition, Photosensitization, quantum dots, solar cells, Wet-chemical process}, issn = {1388-2481}, doi = {10.1016/j.elecom.2008.10.042}, author = {Lee, Wonjoo and Min, Sun Ki and Dhas, Vivek V. and Ogale, Satishchandra B. and Han, Sung-Hwan} } @article { ISI:000267509500004, title = {Electronic manifestation of cation-vacancy-induced magnetic moments in a transparent oxide semiconductor: anatase Nb:TiO2}, journal = {Advanced Materials}, volume = {21}, number = {22}, year = {2009}, month = {JUN}, pages = {2282+}, publisher = {WILEY-V C H VERLAG GMBH}, type = {Article}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

Nb-doped anatase TiO2 thin films grown by pulsed-laser deposition show Kondo scattering in elctronic-transport measurements, providing evidence for the formation of magnetic moments. The origin of magnetism is attributed to cation (Ti) vacancies, confirmed by X-ray absorption spectroscopy and first-principle calculations. The Ti vacancies are controlled by oxygen partial pressure during growth.

}, issn = {0935-9648}, doi = {10.1002/adma.200803019}, author = {Zhang, Shixiong and Ogale, Satishchandra B. and Yu, Weiqiang and Gao, Xingyu and Liu, Tao and Ghosh, Saurabh and Das, Gour P. and Wee, Andrew T. S. and Greene, Richard L. and Venkatesan, Thirumalai} } @article { ISI:000272052200068, title = {Enhanced nonvolatile resistive switching in dilutely cobalt doped TiO2}, journal = {Applied Physics Letters}, volume = {95}, number = {20}, year = {2009}, month = {NOV}, pages = {203502}, publisher = {AMER INST PHYSICS}, address = {CIRCULATION \& FULFILLMENT DIV, 2 HUNTINGTON QUADRANGLE, STE 1 N O 1, MELVILLE, NY 11747-4501 USA}, abstract = {

Incorporation of dilute concentration of dopant having a valence state different than that of the host cation enables controlled incorporation proximity vacancy defects for local charge balance. Since nonvolatile resistive switching is a phenomenon tied to such defects, it can be expected to be influenced by dilute doping. In this work, we demonstrate that enhanced nonvolatile resistive switching is realized in dilutely cobalt doped TiO2 films grown at room temperature. We provide essential characterizations and analyses. We suggest that the oxygen vacancies in the proximity of immobile dopants provide well distributed anchors for the development of systematic filamentary tracks.

}, keywords = {cobalt, Doping, magnetic switching, random-access storage, titanium compounds, vacancies (crystal), valency}, issn = {0003-6951}, doi = {10.1063/1.3263713}, author = {Bogle, Kashinath A. and Bachhav, Mukesh N. and Deo, Meenal S. and Valanoor, Nagarajan and Ogale, Satishchandra B.} } @article { ISI:000269310700020, title = {Non-templated hydrothermal growth of anisotropic magnetite nanostructures using hexamine as the directing agent}, journal = {Journal of Nanoscience and Nanotechnology}, volume = {9}, number = {10}, year = {2009}, month = {OCT}, pages = {5823-5828}, publisher = {AMER SCIENTIFIC PUBLISHERS}, address = {25650 NORTH LEWIS WAY, STEVENSON RANCH, CA 91381-1439 USA}, abstract = {

Anisotropic growth of magnetite (Fe(3)O(4)) nanoparticles is achieved in a hydrothermal growth process using hexamine to play a dual role of oxide forming and directing agent. The samples are characterized by X-ray diffraction, scanning electron microscopy, high resolution transmission electron microscopy, squid magnetometry, ferromagnetic resonance technique, diffuse reflectance spectroscopy and Mossbauer spectroscopy, which collectively establish the formation of Fe(3)O(4) phase. Anisotropic structures such as nanorods and nanotubules are revealed and these are shown to exhibit good humidity sensing properties.

}, keywords = {Anisotropic Nanostructures, Hexamine, hydrothermal, magnetite, Mossbauer}, issn = {1533-4880}, doi = {10.1166/jnn.2009.1244}, author = {Bhagwat, S. V. and Jouen, Samuel and Kundaliya, D. C. and Singh, H. and Jagadale, Tushar C. and Athawale, A. A. and Lofland, S. E. and Hannoyer, Beatrice and Ogale, Satishchandra B.} } @article { ISI:000268233800070, title = {Optoelectronic photoinduced charge transfer system with mu 3PhN-Ru-3 cluster functionalized single-walled carbon nanotubes}, journal = {Journal of Materials Chemistry C}, volume = {113}, number = {30}, year = {2009}, month = {JUN}, pages = {13403-13408}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Optoelectronic photoinduced charges have been attracting great attention lately in view of their applicability to diverse optoelectronic device systems. Here, we report the design and implementation of a charge transfer system based on triruthenium (Ru) cluster compounds on viologen modified single-walled carbon nanotubes (V-SWNTs) by an in situ preparation method. We examine the photoinduced (intensity dependent and temporal) changes in the transport properties of the Ru-cluster functionalized V-SWNT coating and identify the possible charge transfer mechanism. Furthermore, we demonstrate the applicability of such Ru-cluster functionalized V-SWNT films to photoelectrochemical cells.

}, issn = {1932-7447}, doi = {10.1021/jp901683g}, author = {Lee, Wonjoo and Koo, Gumae and Ogale, Satishchandra B. and Han, Sung-Hwan} } @article { ISI:000281058300002, title = {Dilute doping, defects, and ferromagnetism in metal oxide systems}, journal = {Advanced Materials}, volume = {22}, number = {29}, year = {2010}, month = {AUG}, pages = {3125-3155}, publisher = {WILEY-V C H VERLAG GMBH}, type = {Article}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

Over the past decade intensive research efforts have been carried out by researchers around the globe on exploring the effects of dilute doping of magnetic impurities on the physical properties of functional non-magnetic metal oxides such as TiO2 and ZnO. This effort is aimed at inducing spin functionality (magnetism, spin polarization) and thereby novel magneto-transport and magneto-optic effects in such oxides. After an early excitement and in spite of some very promising results reported in the literature, this field of diluted magnetic semiconducting oxides (DMSO) has continued to be dogged by concerns regarding uniformity of dopant incorporation, the possibilities of secondary ferromagnetic phases, and contamination issues. The rather sensitive dependence of magnetism of the DMSO systems on growth methods and conditions has led to interesting questions regarding the specific role played by defects in the attendant phenomena. Indeed, it has also led to the rapid re-emergence of the field of defect ferromagnetism. Many theoretical studies have contributed to the analysis of diverse experimental observations in this field and in some cases to the predictions of new systems and scenarios. In this review an attempt is made to capture the scope and spirit of this effort highlighting the successes, concerns, and questions.

}, issn = {0935-9648}, doi = {10.1002/adma.200903891}, author = {Ogale, Satishchandra B.} } @article { ISI:000279514400059, title = {Nanoscale modulation of electronic states across unit cell steps on the surface of an epitaxial colossal magnetoresistance manganite film}, journal = {Applied Physics Letters}, volume = {96}, number = {26}, year = {2010}, month = {JUN}, pages = {Article No. 263108}, publisher = {AMER INST PHYSICS}, type = {Article}, address = {CIRCULATION \& FULFILLMENT DIV, 2 HUNTINGTON QUADRANGLE, STE 1 N O 1, MELVILLE, NY 11747-4501 USA}, abstract = {

The nature of electronic states near the edge of unit cell steps on the surface of epitaxial La(0.7)Sr(0.3)MnO(3) (LSMO) thin films grown by real-time reflection high energy electron diffraction monitored pulsed laser deposition is examined by scanning tunneling microscopy and scanning tunneling spectroscopy techniques. It is observed that the electronic states are strongly modulated near the step edge with considerably high gap at the edge and low gap on the terrace. This modulation weakens at low temperature. The temperature evolution of the density of states and the nature of gap in deep metallic state of LSMO are also discussed. (C) 2010 American Institute of Physics. [doi:10.1063/1.3455886]

}, keywords = {colossal magnetoresistance, electronic density of states, lanthanum compounds, magnetic epitaxial layers, Nanostructured materials, pulsed laser deposition, reflection high energy electron diffraction, scanning tunnelling microscopy, scanning tunnelling spectroscopy, strontium compounds}, issn = {0003-6951}, doi = {10.1063/1.3455886}, author = {Rana, Abhimanyu and Bogle, Kashinath A. and Game, Onkar S. and Patil, Shankar and Valanoor, Nagarajan and Ogale, Satishchandra B.} } @article { ISI:000279836400055, title = {Room temperature synthesis of rutile TiO2 hierarchical nanoneedle flower morphology for dye sensitized solar cell}, journal = {Journal of Nanoscience and Nanotechnology}, volume = {10}, number = {9}, year = {2010}, month = {SEP}, pages = {5894-5898}, publisher = {AMER SCIENTIFIC PUBLISHERS}, address = {26650 THE OLD RD, STE 208, VALENCIA, CA 91381-0751 USA}, abstract = {

Rutile TiO2 nanoneedle flowers (representing concurrent nano-micro hierarchical morphology) with high shape anisotropy ratio are synthesized at room temperature by using a simple and efficient one step electrochemical process of anodic dissolution. This process employs highly acidic bath of perchloric acid (pH \< 2) and a large current density on the surface of Titanium foil to form nanostructures. The diameter and length of rutile TiO2 nanoneedle is similar to 8 nm and 100 nm respectively (aspect ratio \> 10). Dye sensitized solar cell (DSSC) configured using such rutile TiO2 flowers is shown to exhibit IPCE of 30\% and power conversion efficiency of similar to 3.6\%.

}, keywords = {Anodization, DSSC, Nanoneedles, Rutile TiO2}, issn = {1533-4880}, doi = {10.1166/jnn.2010.2475}, author = {Hyam, Rajeshkumar S. and Bhosale, Reshma K. and Lee, Wonjoo and Han, Sung-Hwan and Hannoyer, Beatrice and Ogale, Satishchandra B.} } @article { ISI:000281347500022, title = {Surface texture and specific adsorption sites of sol-gel synthesized anatase TiO2 nanoparticles}, journal = {Materials Research Bulletin}, volume = {45}, number = {10}, year = {2010}, month = {OCT}, pages = {1470-1475}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

The surface properties of sot-gel synthesized anatase titania (TiO2) nanoparticles are probed by sorptiometry, infrared absorption spectroscopy, UV-vis diffuse reflectance spectroscopy and high resolution transmission electron microscopy. The results reveal strong correlations of the surface area, porosity, pyridine adsorption capacity and strength, and catalytic methylbutynol decomposition activity. (C) 2010 Elsevier Ltd. All rights reserved.

}, keywords = {Catalytic properties, Nanostructures, Oxides, Sol-gel chemistry, X-ray diffraction}, issn = {0025-5408}, doi = {10.1016/j.materresbull.2010.06.026}, author = {Zaki, Mohamed I. and Mekhemer, Gamal A. H. and Fouad, Nasr E. and Jagadale, Tushar C. and Ogale, Satishchandra B.} } @article { ISI:000279851200004, title = {Template assisted highly ordered novel self assembly of micro-reservoirs and its replication}, journal = {Lab on a Chip}, volume = {10}, number = {15}, year = {2010}, month = {JAN}, pages = {1902-1906}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A novel method is developed for template assisted fabrication of a regular assembly of microcavity arrays. Simple micropatterns on PDMS mold are used to create complex geometries via solvent vapor back pressure in a biodegradable polymer. Cavities are in turn replicated in complimentary PDMS mushroom like microstructures.

}, issn = {1473-0197}, doi = {10.1039/c004576d}, author = {Hire, Santosh L. and Shelke, Manjusha V. and Kale, Vinayak S. and Galopin, Elisabeth and Kulkarni, Mohan G. and Boukherroub, Rabah and Ogale, Satishchandra B.} } @article { ISI:000296204100007, title = {Chlorate ion mediated rutile to anatase reverse phase transformation in the TiO2 nanosystem}, journal = {Dalton Transactions}, volume = {40}, number = {43}, year = {2011}, month = {SEP}, pages = {11374-11377}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Rutile TiO2 nanoneedles (8 nm x 100 nm) synthesized at room temperature by anodization in perchloric acid (pH \< 1) are shown to undergo an interesting reverse phase transformation to anatase nanoparticles (8 nm) at 300 degrees C only if the chlorate ions are maintained in the ambient medium. When chlorate ions are removed by multiple washing, the rutile phase and the needle morphology are maintained. The mechanism of formation of the ion-stabilized solid and its thermal evolution is discussed.

}, issn = {1477-9226}, doi = {10.1039/c1dt11288k}, author = {Bhosale, Reshma and Hyam, Rajeshkumar S. and Dhanya, P. and Ogale, Satishchandra B.} } @article { ISI:000291832600007, title = {Enhanced DSSC performance with high surface area thin anatase TiO2 nanoleaves}, journal = {Solar Energy}, volume = {85}, number = {6, SI}, year = {2011}, month = {JUN}, pages = {1213-1219}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Thin anatase TiO2 nanoleaves (NLs) with high surface area (similar to 93 m(2)/g) are synthesized by hydrothermal route and dye-sensitized solar cells (DSSC) made using such NLs are compared with those made with hydro-thermally synthesized TiO2 nanoparticles and the Degussa P25 powder. The NLs-based DSSCs show increment of 16\% and 24\% in the total conversion efficiency over the cells made with NPs and P25 respectively. Interestingly, the highest increment in the conversion efficiency (similar to 35\%) is achieved for cells made using a 50:50 (wt/wt) mixture of NLs and NPs. In this case the dye loading is found to be \>50\% higher than the case of NP films. Moreover the DC resistance of diffusion of I-3(-) in electrolyte (as revealed by the electrochemical impedance spectroscopy) is substantially lower than the NP film case, other cell parameters being nominally comparable. (C) 2011 Elsevier Ltd. All rights reserved.

}, keywords = {Dye-sensitized solar cells, Electrochemical impedance spectroscopy, hydrothermal}, issn = {0038-092X}, doi = {10.1016/j.solener.2011.02.029}, author = {Dhas, Vivek V. and Muduli, Subas and Agarkar, Shruti A. and Rana, Abhimanyu and Hannoyer, Beatrice and Banerjee, Rahul and Ogale, Satishchandra B.} } @article { ISI:000294359100090, title = {Evidence of lateral heat transfer during laser assisted atom probe tomography analysis of large band gap materials}, journal = {Applied Physics Letters}, volume = {99}, number = {8}, year = {2011}, month = {AUG}, pages = {Article No. 084101}, publisher = {AMER INST PHYSICS}, type = {Article}, address = {CIRCULATION \& FULFILLMENT DIV, 2 HUNTINGTON QUADRANGLE, STE 1 N O 1, MELVILLE, NY 11747-4501 USA}, abstract = {

Investigation of wustite (FeO), iron (Fe), and silicon (Si) specimens by infrared laser assisted three dimensional atom probe tomography shows evidence of confined surface absorption of the laser energy as the mechanism of laser assisted field evaporation for high band gap materials. The absorption region is shown to be located on the laser illumination side, close to the specimen apex. A simple model based on thermal diffusivity and spatial extent of the absorption region is derived and applied to the experimental results. The values of thermal diffusivity thus obtained are in good agreement with the published data. (C) 2011 American Institute of Physics. [doi:10.1063/1.3622647]

}, issn = {0003-6951}, doi = {10.1063/1.3622647}, author = {Bachhav, Mukesh N. and Danoix, R. and Vurpillot, F. and Hannoyer, Beatrice and Ogale, Satishchandra B. and Danoix, F.} } @article { ISI:000299031600049, title = {Ferroelectric and electrical characterization of multiferroic BiFeO3 at the single nanoparticle level}, journal = {Applied Physics Letters}, volume = {99}, number = {25}, year = {2011}, month = {DEC}, pages = {Article No. 252905}, publisher = {AMER INST PHYSICS}, type = {Article}, address = {CIRCULATION \& FULFILLMENT DIV, 2 HUNTINGTON QUADRANGLE, STE 1 N O 1, MELVILLE, NY 11747-4501 USA}, abstract = {

Ferroelectric BiFeO3 (BFO) nanoparticles deposited on epitaxial substrates of SrRuO3 (SRO) and La1-xSrxMnO3 (LSMO) were studied using band excitation piezoresponse spectroscopy (BEPS), piezoresponse force microscopy (PFM), and ferromagnetic resonance (FMR). BEPS confirms that the nanoparticles are ferroelectric in nature. Switching behavior of nanoparticle clusters were studied and showed evidence for inhomogeneous switching. The dimensionality of domains within nanoparticles was found to be fractal in nature, with a dimensionality constant of similar to 1.4, on par with ferroelectric BFO thin-films under 100 nm in thickness. Ferromagnetic resonance studies indicate BFO nanoparticles only weakly affect the magnetic response of LSMO. (C) 2011 American Institute of Physics. [doi: 10.1063/1.3671392]

}, issn = {0003-6951}, doi = {10.1063/1.3671392}, author = {Vasudevan, R. K. and Bogle, Kashinath A. and Kumar, A. and Jesse, S. and Magaraggia, R. and Stamps, R. and Ogale, Satishchandra B. and Potdar, H. S. and Nagarajan, V.} } @article { ISI:000300460900038, title = {Investigation of wustite (Fe1-xO) by femtosecond laser assisted atom probe tomography}, journal = {Ultramicroscopy}, volume = {111}, number = {6}, year = {2011}, month = {MAY}, pages = {584-588}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

In this paper, we report results obtained from laser assisted three-dimensional (3-D) atom probe tomography (APT) on wustite (Fe1-xO). Oxides are generally insulating and hence hard to analyse in conventional electrical assisted APT. To overcome this problem, femtosecond laser pulses are used instead of voltage pulses. Here we discuss some aspects of pulsed laser field evaporation and optimization of parameters to achieve better chemical accuracy. (C) 2010 Elsevier B.V. All rights reserved.

}, keywords = {Atom probe tomography, Laser assisted field evaporation, Wustite}, issn = {0304-3991}, doi = {10.1016/j.ultramic.2010.11.023}, author = {Bachhav, Mukesh N. and Danoix, R. and Danoix, F. and Hannoyer, Beatrice and Ogale, Satishchandra B. and Vurpillot, F.} } @article { ISI:000293196800041, title = {Isobutrin from butea monosperma (flame of the forest): a promising new natural sensitizer belonging to chalcone class}, journal = {ACS Applied Materials \& Interfaces}, volume = {3}, number = {7}, year = {2011}, month = {JUL}, pages = {2440-2444}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

In this work, {\textquoteleft}{\textquoteleft}isobutrin{\textquoteright}{\textquoteright}, an ecofriendly sensitizer that is extracted from Butea monosperma (commonly known as {\textquoteleft}{\textquoteleft}Flame of the Forest{\textquoteright}{\textquoteright}) flowers, is introduced. It is a bright yellow pigment belonging to the chalcone class and is examined as a sensitizer for optoelectronic applications. It is observed that chelation of this dye with Ti ions results into a strong dye-TiO(2) charge transfer (DTCT) band in the visible region. This Ti-Isobutrin chelate is stable, irreversible and its formation is studied using Benesi-Hildebrand plot. The locations of HOMO-LUMO states of the Ti-isobutrin chelate and the corresponding band alignment with TiO(2) are obtained. Also, a thermal stability test revealed that isobutrin is stable above 100 degrees C.

}, keywords = {Butea monosperma, chalcone, dye-sensitized solar cell, isobutrin, sensitizer, TiO(2)}, issn = {1944-8244}, doi = {10.1021/am200341y}, author = {Agarkar, Shruti A. and Kulkarni, Roshan R. and Dhas, Vivek V. and Chinchansure, Ashish A. and Hazra, Partha and Joshi, Swati P. and Ogale, Satishchandra B.} } @article { ISI:000293175800026, title = {Maghemite (hematite) core (shell) nanorods via thermolysis of a molecular solid of Fe-complex}, journal = {Dalton Transactions}, volume = {40}, number = {31}, year = {2011}, month = {2011}, pages = {8003-8011}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

An Fe-metal complex with 2{\textquoteright}-hydroxy chalcone (2{\textquoteright}-HC) ligands [Fe(III) (2{\textquoteright}-hydroxy chalcone) 3] is synthesized by a chemical route and is subjected to different thermal treatments. Upon thermolysis in air at 450 degrees C for 3 h the complex yields maghemite (gamma-Fe(2)O(3)) nanorods with a thin hematite (alpha-Fe(2)O(3)) shell. X-Ray diffraction (XRD), Mossbauer spectroscopy, diffuse reflectance spectroscopy (UV-DRS), high resolution transmission electron microscopy (HR-TEM), field emission scanning electron microscopy (FE-SEM) and vibrating sample magnetometry (VSM) are used to characterize the samples. The stability of the ligand and the Fe-complex is further examined by using thermogravimmetric/differential thermal analysis (TGA/DTA). We suggest a residual ligand controlled mechanism for the formation of an anisotropic nanostructure in a crumbling molecular solid undergoing ligand decomposition. Since the band gap of iron oxide is in the visible range, we explored the use of our core shell nano-rod sample for photocatalytic activity for H(2) generation by H(2)S splitting under solar light. We observed high photocatalytic activity for hydrogen generation (75 ml h(-1)).

}, issn = {1477-9226}, doi = {10.1039/c1dt10319a}, author = {Chaudhari, N. S. and Warule, S. S. and Muduli, Subas and Kale, B. B. and Jouen, Samuel and Lefez, Benoit and Hannoyer, Beatrice and Ogale, Satishchandra B.} } @article { ISI:000289518000002, title = {Magnetite/CdTe magnetic-fluorescent composite nanosystem for magnetic separation and bio-imaging}, journal = {Nanotechnology}, volume = {22}, number = {22}, year = {2011}, month = {JUN}, pages = {Article No. 225101}, publisher = {IOP PUBLISHING LTD}, type = {Article}, address = {TEMPLE CIRCUS, TEMPLE WAY, BRISTOL BS1 6BE, ENGLAND}, abstract = {

A new synthesis protocol is described to obtain a CdTe decorated magnetite bifunctional nanosystem via dodecylamine (DDA) as cross linker. High resolution transmission electron microscopy (HRTEM), energy-dispersive x-ray spectroscopy (EDAX), vibrating sample magnetometry (VSM), Fourier transform infrared spectroscopy (FTIR), diffuse reflectance spectroscopy (DRS) and fluorescence microscopy are used to characterize the constitution, size, composition and physical properties of these superparamagnetic-fluorescent nanoparticles. These CdTe decorated magnetite nanoparticles were then functionalized with anti-epidermal growth factor receptor (EGFR) antibody to specifically target cells expressing this receptor. The EGFR is a transmembrane glycoprotein and is expressed on tumor cells from different tissue origins including human leukemic cell line Molt-4 cells. The magnetite-CdTe composite nanosystem is shown to perform excellently for specific selection, magnetic separation and fluorescent detection of EGFR positive Molt-4 cells from a mixed population. Flow cytometry and confocal laser scanning microscopy results show that this composite nanosystem has great potential in antibody functionalized magnetic separation and imaging of cells using cell surface receptor antibody.

}, issn = {0957-4484}, doi = {10.1088/0957-4484/22/22/225101}, author = {Kale, Anup and Kale, Sonia and Yadav, Prasad and Gholap, Haribhau and Pasricha, Renu and Jog, Jyoti Prakash and Lefez, Benoit and Hannoyer, Beatrice and Shastry, Padma and Ogale, Satishchandra B.} } @article { ISI:000287277700038, title = {Quantum dot based immunosensor using 3D circular microchannels fabricated in PDMS}, journal = {Biosensors \& Bioelectronics}, volume = {26}, number = {6}, year = {2011}, month = {FEB}, pages = {3050-3053}, publisher = {ELSEVIER ADVANCED TECHNOLOGY}, type = {Article}, address = {OXFORD FULFILLMENT CENTRE THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

Microchannel is basic functional component of microfluidic chip and every step-forward of its construction technique has been receiving concern all over the world. The present work describes a novel, rapid and simple fabrication technique for building 3D microchannels in poly(dimethyl siloxane) (PDMS) elastomer. These microchannels were used for rapid detection of antigens (E. coli) by quantum dot (QD) based approach. Luminescent QD (CdTe) were synthesized by aqueous method and characterized using high resolution transmission electron microscopy (HRTEM), fluorescence spectroscopy and X-ray diffraction (XRD). The QDs were functionalized with anti-E. coli antibodies for immuno-detection. The reported process allowed easier and faster method of fabrication of circular 3D micochannels and demonstrated their potential use in an immuno-biosensor device. (C) 2010 Elsevier B.V. All rights reserved.

}, keywords = {Capillary driven flows, Circular microfluidics, Immunosensor, QDs}, issn = {0956-5663}, doi = {10.1016/j.bios.2010.12.017}, author = {Morarka, Amit and Agrawal, Shailaja and Kale, Sonia and Kale, Anup and Ogale, Satishchandra B. and Paknikar, Kishore and Bodas, Dhananjay S.} } @article { ISI:000293419700042, title = {Selectivity tailoring in liquid phase oxidation over MWNT-Mn3O4 nanocomposite catalysts}, journal = {Journal of Physical Chemistry C}, volume = {115}, number = {31}, year = {2011}, month = {AUG}, pages = {15440-15448}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Highly selective multiwalled nanotubes (MWNT)-Mn3O4 nano-composite catalyst was designed for liquid phase oxidation of p-cresol, which gave highest selectivity of 90\% to the first step oxidation product, p-hydroxy benzyl alcohol. Mn3O4 nanoparticles and MWNT-Mn3O4 nanocomposites were synthesized by coprecipitation route using mixed precursors under controlled conditions. The phase purity of Mn3O4 and the formation of MWNT-Mn3O4 nanocomposites were confirmed by X-ray diffraction, Raman spectroscopy, and X-ray photoelectron spectroscopy. High-resolution transmission electron microscopy revealed the selective exposure of (101) and (001) planes of Mn3O4 nanoparticles in the MWNT-Mn3O4 composite, while lowering in oxidizing capacity of MWNT-Mn3O4 nanocomposite confirmed by cyclic voltametry was due to incorporation of electron rich MWNT. Thus, selectivity tuning of the new material (MWNT-Mn3O4 nanocomposite) was found to be due to alteration in both geometric as well as electronic properties. A plausible reaction pathway also has been proposed involving the predominant role of nucleophilic lattice oxygen (O2-) species due to exposure of particular crystal planes giving highest selectivity to p-hydroxy benzyl alcohol.

}, issn = {1932-7447}, doi = {10.1021/jp203318n}, author = {Biswal, Mandakini and Dhas, Vivek V. and Mate, Vivek R. and Banerjee, Abhik and Pachfule, Pradip and Agrawal, Kanika L. and Ogale, Satishchandra B. and Rode, Chandrashekhar V.} } @article { ISI:000293213600025, title = {Shape preserving chemical transformation of ZnO mesostructures into anatase TiO2 mesostructures for optoelectronic applications}, journal = {Energy \& Environmental Science}, volume = {4}, number = {8}, year = {2011}, month = {AUG}, pages = {2835-2839}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

In this work we report on the synthesis of various ZnO mesostructures (rods, spheres, flakes and flower-like morphologies) by hydrothermal and co-precipitation methods and their remarkable and complete transformation into anatase TiO2 mesostructures with nominally similar shapes using controlled low temperature TiCl4 treatment. Various techniques are used to demonstrate the phase purity and morphology details. Based on the careful examination of the transformation of ZnO rods into TiO2 tubes we suggest a mechanism which embodies initial formation of a thin TiO2 shell on the ZnO surface by ion exchange (Ti4+-Zn2+) followed by Zn diffusion through the shell and its oxidation on the surface. We used these converted TiO2 mesostructures for light harvesting in Dye Sensitized Solar Cells (DSSCs) to enhance the conversion efficiency. It is shown that DSSCs made using a doctor bladed film of TiO2 nanoparticles with an overlayer of TiCl4 treated ZnO flowers yield a solar cell efficiency of 6.9\% which is considerably higher than that with only TiO2 nanoparticle film (5.4\%) of comparable thickness.

}, issn = {1754-5692}, doi = {10.1039/c1ee01515j}, author = {Muduli, Subas and Game, Onkar S. and Dhas, Vivek V. and Yengantiwar, Ashish and Ogale, Satishchandra B.} } @article { ISI:000296306600025, title = {Strong electric field modulation of transport in PVDF/MWCNT nanocomposite near the percolation threshold}, journal = {Solid State Communications}, volume = {151}, number = {21}, year = {2011}, month = {NOV}, pages = {1612-1615}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A nanocomposite comprising of multiwalled carbon nanotubes (MWCNT) embedded in ferroelectric Poly(vinylidene fluoride) PVDF polymer matrix is examined for electric field induced transport modulation. The pulsed laser deposition (PLD) grown thin films of the nanocomposite with different MWCNT content were characterized. When used as a channel layer in a field effect transistor configuration, a strong electric field modulation of the transport was realized just below the percolation threshold. We believe that this nanocomposite non-percolating channel concept can provide several opportunities for FET devices for organic electronics. (C) 2011 Elsevier Ltd. All rights reserved.

}, keywords = {Field effect device, pulsed laser deposition, PVDF, Scanning tunneling microscopy}, issn = {0038-1098}, doi = {10.1016/j.ssc.2011.07.018}, author = {Chanmal, Chetan and Deo, Meenal S. and Rana, Abhimanyu and Jog, Jyoti Prakash and Ogale, Satishchandra B.} } @article { ISI:000296659000032, title = {Strong photo-response in a flip-chip nanowire p-Cu2O/n-ZnO junction}, journal = {Nanoscale}, volume = {3}, number = {11}, year = {2011}, month = {OCT}, pages = {4706-4712}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Cu2O nanoneedles are synthesized on a copper substrate by a simple anodization and reducing ambient annealing protocol. ZnO nanorods are grown on ITO coated glass by a low temperature chemical route. The electronic and photo-response properties of the p-Cu2O/n-ZnO flip-chip heterojunction are then studied and analyzed. We show that the I-V characteristic is rectifying and the junction exhibits a good photoresponse (similar to 120\% under 1 V reverse bias) under AM 1.5 (1 Sun) illumination. This nano-heterojunction photo-response is far stronger as compared to that of a pulsed laser deposited thin film p-Cu2O/n-ZnO heterojunction, which can be attributed to higher junction area in the former case.

}, issn = {2040-3364}, doi = {10.1039/c1nr10665a}, author = {Deo, Meenal S. and Mujawar, Sarfraj and Game, Onkar S. and Yengantiwar, Ashish and Banpurkar, Arun G. and Kulkarni, Sneha and Jog, Jyoti Prakash and Ogale, Satishchandra B.} } @article { ISI:000294586400026, title = {TiO2 nanoparticle size dependence of porosity, adsorption and catalytic activity}, journal = {Colloids and Surfaces A-Physicochemical and Engineering Aspects}, volume = {385}, number = {1-3}, year = {2011}, month = {JUN}, pages = {195-200}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The issue of size-sensitivity of the surface properties of anatase TiO2 is addressed by examining three samples synthesized by aqueous sol-gel method having different particle sizes on the nanoscale (8-19 nm). A number of characterization methods, namely, X-ray powder diffractometry, infrared spectroscopy, UV-vis diffuse reflectance spectroscopy, sorptiometry and electron microscopy are employed. The data obtained reveal interrelated dependencies of the surface area, porosity, nitrogen and pyridine adsorption capacity and strength, and catalytic methylbutynol decomposition activity on the size of titania nanoparticles. Pertinent size-dependent bulk properties are also revealed and used to account for the changes conceded by the surface properties. Accordingly, going from 19 to 8-nm sized titania particles has been found to stabilize the anatase structure, weaken the surface acidity, and blueshift the UV absorption edge of titania. (C) 2011 Elsevier B.V. All rights reserved.

}, keywords = {Catalytic methylbutynol decomposition activity, Nano-titania, Particle size dependencies, Pyridine sorptiometry, Surface texture}, issn = {0927-7757}, doi = {10.1016/j.colsurfa.2011.06.010}, author = {Zaki, Mohamed I. and Fouad, Nasr E. and Mekhemer, Gamal A. H. and Jagadale, Tushar C. and Ogale, Satishchandra B.} } @article { ISI:000312233600006, title = {Carbon nanoscrolls by pyrolysis of a polymer}, journal = {Solid State Communications}, volume = {152}, number = {23}, year = {2012}, month = {DEC}, pages = {2092-2095}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

3D network of carbon nanoscrolls was synthesized starting from pyrolysis of poly(acrylic acid-co-maleic acid) sodium salt. It is a catalyst-free process where pyrolysis of polymer leads to formation of carbon form and sodium carbonate. Upon water soaking of pyrolysis product, the carbon form undergoes self-assembly to form carbon nanoscrolls. The interlayer distance between the walls of carbon nanoscroll was found to be 0.34 nm and the carbon nanoscrolls exhibited a surface area of 188 m(2)/g as measured by the BET method. (c) 2012 Elsevier Ltd. All rights reserved.

}, keywords = {Carbon nanoscrolls, Polymer, Pyrolysis, supercapacitor}, issn = {0038-1098}, doi = {10.1016/j.ssc.2012.08.029}, author = {Yadav, Prasad and Warule, Sambhaji and Jog, Jyoti Prakash and Ogale, Satishchandra B.} } @article { ISI:000303153800009, title = {Characterization of biocompatible NiCo2O4 nanoparticles for applications in hyperthermia and drug delivery}, journal = {Nanomedicine-Nanotechnology Biology and Medicine}, volume = {8}, number = {4}, year = {2012}, month = {MAY}, pages = {452-459}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Monodispersed, superparamagnetic nickel cobaltite (NCO) nanoparticles were functionalized using mercaptopropionic acid (MPA). MPA conjugates with NCO forming a metal-carboxylate linkage, with the MPA-MPA interaction occurring via formation of disulfide bonds, leaving another carboxyl end free for additional conjugation. The cytotoxicity studies on NCO-MPA show cell viability of similar to 100\% up to a dosage of 40 mu g/mL on SiHa, MCF7, and B16F10 cell lines, and on mouse primary fibroblasts. Time-dependent cell viability studies done for a duration of 72 hours showed the cell lines{\textquoteright} viability up to 80\% for dosages as high as 80 mu g/mL. Negligible leaching (\<5 ppm) of ionic Co or Ni was noted into the delivery medium. Upon subjecting the NCO-MPA dispersion (0.1 mg/mL) to radiofrequency absorption, the nanoparticles were heated to 75 degrees C within 2 minutes, suggesting its promise as a magnetic hyperthermia agent. Furthermore, the amino acid lysine and the drug cephalexin were successfully adducted to the NCO system, suggesting its potential for drug delivery. From the Clinical Editor: NCO-MPA nanopartciles were found to be promising magnetic hyperthermia agents, suggesting potential future clinical applications. (C) 2012 Elsevier Inc. All rights reserved.

}, keywords = {Cytotoxicity, drug delivery, Magnetic hyperthermia, Magnetic nanoparticles}, issn = {1549-9634}, doi = {10.1016/j.nano.2011.07.010}, author = {Kale, Sangeeta N. and Jadhav, Anil D. and Verma, Seema and Koppikar, Soumya J. and Kaul-Ghanekar, Ruchika and Dhole, Sanjay D. and Ogale, Satishchandra B.} } @article { ISI:000312147400004, title = {Dye sensitized solar cell (DSSC) by a novel fully room temperature process: a solar paint for smart windows and flexible substrates}, journal = {RSC Advances}, volume = {2}, number = {31}, year = {2012}, month = {MAR}, pages = {11645-11649}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

We report the development of a titania-nanoparticle-based solar paint which gives a conversion efficiency of 3.6\% on FTO/glass substrates under fully room temperature processing. The paint cures quickly saving time in the cell fabrication process. Even on a flexible ITO/PET substrate efficiency of 2.4\% was achieved. We present and analyze the results of described materials and device property characterizations.

}, issn = {2046-2069}, doi = {10.1039/c2ra22182a}, author = {Agarkar, Shruti A. and Dhas, Vivek V. and Muduli, Subas and Ogale, Satishchandra B.} } @article { ISI:000312301800017, title = {Epitaxial magnetic oxide nanocrystals via phase decomposition of bismuth perovskite precursors}, journal = {Advanced Functional Materials}, volume = {22}, number = {24}, year = {2012}, month = {DEC}, pages = {5224-5230}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

The phase instability of bismuth perovskite (BiMO3), where M is a ferromagnetic cation, is exploited to create self-assembled magnetic oxide nanocrystal arrays on oxide supports. Conditions during pulsed laser deposition are tuned so as to induce complete breakdown of the perovskite precursor into bismuth oxide (Bi2O3) and metal oxide (M-Ox) pockets. Subsequent cooling in vacuum volatizes the Bi2O3 leaving behind an array of monodisperse nanocrystals. In situ reflective high energy electron diffraction beam is exploited to monitor the synthesis in real-time. Analysis of the patterns confirms the phase separation and volatization process. Successful synthesis of M-Ox, where M = Mn, Fe, Co, and Cr, is shown using this template-free facile approach. Detailed magnetic characterization of nanocrystals is carried out to reveal the functionalities such as magnetic anisotropy as well as larger than bulk moments, as expected in these oxide nanostructures.

}, keywords = {Bi2O3 evaporation, bismuth perovskites, epitaxial nanostructures, magnetic oxides, phase separation}, issn = {1616-301X}, doi = {10.1002/adfm.201201066}, author = {Bogle, Kashinath A. and Cheung, Jeffrey and Chen, Yong-Lun and Liao, Sheng-Chieh and Lai, Chih-Hung and Chu, Ying-Hao and Gregg, John M. and Ogale, Satishchandra B. and Valanoor, Nagarajan} } @article { ISI:000310940500009, title = {Laser synthesized super-hydrophobic conducting carbon with broccoli-type morphology as a counter-electrode for dye sensitized solar cells}, journal = {Nanoscale}, volume = {4}, number = {21}, year = {2012}, month = {NOV}, pages = {6730-6734}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A laser photochemical process is introduced to realize superhydrophobic conducting carbon coatings with broccoli-type hierarchical morphology for use as a metal-free counter electrode in a dye sensitized solar cell. The process involves pulsed excimer laser irradiation of a thin layer of liquid haloaromatic organic solvent o-dichlorobenzene (DCB). The coating reflects a carbon nanoparticle-self assembled and process-controlled morphology that yields solar to electric power conversion efficiency of 5.1\% as opposed to 6.2\% obtained with the conventional Pt-based electrode.

}, issn = {2040-3364}, doi = {10.1039/c2nr32082g}, author = {Gokhale, Rohan and Agarkar, Shruti A. and Debgupta, Joyashish and Shinde, Deodatta and Lefez, Benoit and Banerjee, Abhik and Jog, Jyoti Prakash and More, Mahendra A. and Hannoyer, Beatrice and Ogale, Satishchandra B.} } @article { ISI:000308099900044, title = {MOF derived porous carbon-Fe3O4 nanocomposite as a high performance, recyclable environmental superadsorbent}, journal = {Journal of Materials Chemistry}, volume = {22}, number = {37}, year = {2012}, month = {JUN}, pages = {19694-19699}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A high surface area carbon composite with Fe3O4 nanoparticles is synthesized by pyrolysis of an iron containing Metal Organic Framework (MOF). The composite can be prepared by annealing the MOF at different temperatures (500 degrees C and 600 degrees C), each case exhibiting unique properties in terms of the hydrophobic behaviour and surface area, resulting in specific applicability domains. We highlight the exceptional behaviour of this material as a magnetically separable and recyclable superadsorbent for removal and recovery of environmental pollutants (oil/hydrocarbon and dye/phenol).

}, issn = {0959-9428}, doi = {10.1039/c2jm33798c}, author = {Banerjee, Abhik and Gokhale, Rohan and Bhatnagar, Sumit and Jog, Jyoti Prakash and Bhardwaj, Monika and Lefez, Benoit and Hannoyer, Beatrice and Ogale, Satishchandra B.} } @article { ISI:000303304900028, title = {TiO2-Au plasmonic nanocomposite for enhanced dye-sensitized solar cell (DSSC) performance}, journal = {Solar Energy}, volume = {86}, number = {5}, year = {2012}, month = {MAY}, pages = {1428-1434}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Anatase TiO2 nanoparticles dressed with gold nanoparticles were synthesized by hydrothermal process by using mixed precursor and controlled conditions. Diffused Reflectance Spectra (DRS) reveal that in addition to the expected TiO2 interband absorption below 360 nm gold surface plasmon feature occurs near 564 nm. It is shown that the dye sensitized solar cells made using TiO2-Au plasmonic nanocomposite yield superior performance with conversion efficiency (CE) of similar to 6\% (no light harvesting), current density (J(SC)) of similar to 13.2 mA/cm(2), open circuit voltage (V-oc) of similar to 0.74 V and fill factor (FF) 0.61; considerably better than that with only TiO2 nanoparticles (CE similar to 5\%, J(SC) similar to 12.6 mA/cm(2), V-oc similar to 0.70 V, FF similar to 0.56). (C) 2012 Elsevier Ltd. All rights reserved.

}, keywords = {Anatase TiO2, Au, Dye-sensitized solar cells, Hybrid composite, hydrothermal}, issn = {0038-092X}, doi = {10.1016/j.solener.2012.02.002}, author = {Muduli, Subas and Game, Onkar S. and Dhas, Vivek V. and Vijayamohanan, K. and Bogle, Kashinath A. and Valanoor, N. and Ogale, Satishchandra B.} } @article { ISI:000299584400070, title = {Toward a quantitative correlation between microstructure and DSSC efficiency: a case study of TiO2-xNx nanoparticles in a disordered mesoporous framework}, journal = {Journal of Physical Chemistry C}, volume = {116}, number = {3, SI}, year = {2012}, month = {JAN}, pages = {2581-2587}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

The efficiency (eta) of a dye-sensitized solar cell (DSSC) depends on various parameters, the critical factors being a fast charge carrier transport and a slow rate of electron-hole recombination. The present article describes a simple combustion synthesis method to prepare TiO2-xNx with following four important features that directly influences eta: (1) a disordered mesoporous structural framework with high surface area to give high dye-loading and a small diffusion length for charge carriers allowing rapid movement to the surface; (2) electrically interconnected nanocrystalline TiO2-xNx particles with good necking and predominant (101) anatase facets to minimize electron-hole recombination; (3) low charge storage capacity in the titania framework; and (4) surface unsaturation assisting all the above factors. The pseudo-three-dimensional nature of mesoporous TiO2-xNx with the above features demonstrates the importance of textural features, and porosity allows faster diffusion of charge carriers to surface and their utilization to generate power. A quantitative correlation between interconnected nanoparticles over larger distances in a mesoporous framework and eta is demonstrated. This study also demonstrates an inexpensive and rapid method of producing the photoanode material with high eta in about 10 min.

}, issn = {1932-7447}, doi = {10.1021/jp210677d}, author = {Sivaranjani, Kumarsrinivasan and Agarkar, Shruti A. and Ogale, Satishchandra B. and Gopinath, Chinnakonda S.} } @article { ISI:000314807800001, title = {Ferromagnetism in metal oxide systems: interfaces, dopants, and defects}, journal = {Journal of Materials Chemistry C}, volume = {1}, number = {8}, year = {2013}, month = {DEC}, pages = {1545-1557}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Ferromagnetism in metal oxide systems has always attracted scientific attention in view of the intriguing and interesting interplay of spin, charge, orbital and lattice degrees of freedom that such systems display. This trend appears to be continuing with enhanced focus on interface systems, multiferroics, diluted magnetic semiconducting oxides (DMSOs) and nanomaterial magnetism. Newer techniques are being applied to bring out materials issues that are critical to the precise understanding of the origin of magnetism in certain cases. Interest is also beginning to grow in exploring application potential of some such systems. In this article we review the developments in this field by late 2011 and 2012.

}, issn = {2050-7526}, doi = {10.1039/c2tc00172a}, author = {Thakare, Vishal P. and Game, Onkar S. and Ogale, Satishchandra B.} } @article { ISI:000327259400008, title = {Glucose oxidase conjugated H2O2 sensitive CdTe QDs: an effective fluorescence tool for glucose sensing}, journal = {Journal of Materials Chemistry B}, volume = {1}, number = {47}, year = {2013}, month = {OCT}, pages = {6538-6543}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Water-soluble quantum dots (QDs) are extensively used for molecular sensing because of the flexibility they offer in terms of modification of the QDs surface with a variety of functional groups using thiol chemistry and monitoring by fluorescence intensity. We describe a simple assay that allows the photoluminescence (PL) detection of H2O2 and glucose in aqueous samples and demonstrate its applicability by estimating glucose in blood. To enable the glucose detection, we functionalized the 3-mercaptopropanoic acid (MPA) capped CdTe QDs with glucose oxidase (GOx), the enzyme specific to b-D-glucose, using carbodiimide chemistry. The fluorescence of the GOx-functionalized CdTe QDs was quenched on the interaction with glucose. The same photoluminescence quenching was also observed in gel form, when a GOx modified CdTe QDs loaded agarose gel was dipped in H2O2 and glucose solutions, respectively.

}, issn = {2050-750X}, doi = {10.1039/c3tb21164a}, author = {Singh, Pooja and Prabhune, Asmita and Ogale, Satishchandra B. and Guin, Debanjan} } @article { ISI:000327071100001, title = {Hollow nanogold/meso-magnetite composite: pulsed laser synthesis, properties, and biosensing application}, journal = {Journal of Nanoparticle Research}, volume = {15}, number = {12}, year = {2013}, month = {NOV}, pages = {Article No. UNSP 2081}, publisher = {SPRINGER}, type = {Article}, address = {VAN GODEWIJCKSTRAAT 30, 3311 GZ DORDRECHT, NETHERLANDS}, abstract = {

A facile and template-free UV (Excimer) laser photolysis process is demonstrated to transform a Fe-complex into unique hollow Fe3O4 nanosphere morphology with each sphere having nanometric pores and an opening. Depending on the Fe-complex concentration and processing time interesting configurations are seen to evolve. When an identical process is applied to a mixture of Fe-complex and chloroauric acid an enthrallingly decorated Au-Fe3O4 nanostructure evolves, with Au nanoparticles surface-loaded on mesospheric Fe3O4. This room temperature process implemented under normal laboratory conditions is clearly versatile and applicable to heterojunction nanomaterials synthesis in a single-step process. The potential application of these gold-decorated magnetic nanostructures was also investigated for immuno-magnetic capture of E. coli in biosensing and these were found to be sensitive even below 1,000 cfu/ml. The test results demonstrate linear sensing response in the range of 10(3)-10(5) cfu/ml. We also show that these nanostructures can be used for simple electrical conductivity-based biosensing since they show dramatic conductivity change in a simple drop-cast test. A new laser-based approach to the synthesis of unique hollow sphere morphology of magnetite (Fe3O4) without and with Au nanoparticle decoration is presented. The potential application of these gold-decorated magnetic nanostructures was also investigated for immuno-magnetic capture of E. coli in biosensing and these were found to be sensitive even below 1,000 cfu/ml.

}, keywords = {E. coli cells, Fe-complex, Meso-magnetite, Nanobiotechnology, Nanocomposite, Pulse laser irradiation}, issn = {1388-0764}, doi = {10.1007/s11051-013-2081-8}, author = {Chaudhari, Nilima and Warule, Sambhaji and Agrawal, Shailaja and Thakare, Vishal and Jouen, Samuel and Hannoyer, Beatrice and Kale, Bharat and Paknikar, Kishore and Ogale, Satishchandra B.} } @article { ISI:000334902400006, title = {Defects in chemically synthesized and thermally processed ZnO nanorods: implications for active layer properties in dye-sensitized solar cells}, journal = {Inorganic Chemistry}, volume = {53}, number = {8}, year = {2014}, month = {APR}, pages = {3961-3972}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

We have carried out the effect of post annealing temperatures on the performance of solution-grown ZnO rods as photoanodes in dye-sensitized solar cells. Keeping our basic objective of exploring the effect of native defects on the performance of DSSC, we have synthesized ZnO rods having length in the range of 2-5 mu m by a modified sonication-induced precipitation technique. We performed extensive characterization on the samples annealed at various temperatures and confirmed that annealing at 300 degrees C results in ZnO rods with minimum native defects that have been identified as doubly ionized oxygen vacancies. The electron paramagnetic resonance measurements on the samples, on the other hand, confirmed the presence of shallow donors in the low temperature annealed samples. We also carried out electrochemical impedance measurements to understand the transport properties at different interfaces in the solar cell assembly. We could conclude that solution-processed ZnO rods annealed at 300 degrees C are better suited for fabricating DSSC with improved efficiency (1.57\%), current density (5.11 mA/cm(2)), and fill factor (45.29\%). On the basis of our results, we were able to establish a close connection between the defects in the metal oxide electron transporting nano system and the DSSC performance.

}, issn = {0020-1669}, doi = {10.1021/ic500279q}, author = {Das, Partha Pratim and Agarkar, Shruti A. and Mukhopadhyay, Soumita and Manju, Unnikrishnan and Ogale, Satishchandra B. and Devi, P. Sujatha} } @article { ISI:000340520500055, title = {Enhanced catalytic activity of polyethylenedioxythiophene towards tri-iodide reduction in DSSCs via 1-dimensional alignment using hollow carbon nanofibers}, journal = {Nanoscale}, volume = {6}, number = {17}, year = {2014}, month = {JUL}, pages = {10332-10339}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Here, we report a highly conducting 1-dimensionally (1-D) aligned polyethylenedioxythiophene (PEDOT) along the inner and outer surfaces of a hollow carbon nanofiber (CNF) and its application as a counter electrode in a dye sensitized solar cell (DSSC). The hybrid material (CP-25) displays a conversion efficiency of 7.16\% compared to 7.30\% for the standard Pt counter electrode, 4.48\% for bulk PEDOT and 5.56\% for CNF. The enhanced conversion efficiency of CP-25 is attributed to the accomplishment of high conductivity and surface area of PEDOT through the 1-D alignment compared to its bulk counterpart. Reduced charge transfer resistance and high conductivity of CP-25 could be proven by cyclic voltammetry, impedance analysis and Tafel experiments. Further, through a long-term stability test involving efficiency profiling for 20 days, it is observed that CP-25 possesses excellent durability compared to the bulk PEDOT.

}, issn = {2040-3364}, doi = {10.1039/c4nr00717d}, author = {Anothumakkool, Bihag and Game, Onkar S. and Bhange, Siddheshwar N. and Kumari, Tanya and Ogale, Satishchandra B. and Kurungot, Sreekumar} } @article { ISI:000330799900054, title = {Nickel cobalt sulfide nanoneedle array as an effective alternative to pt as a counter electrode in dye sensitized solar cells}, journal = {RSC Advances}, volume = {4}, number = {16}, year = {2014}, month = {NOV}, pages = {8289-8294}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Self supported nickel cobalt sulfide (NCS) nanoneedles are directly formed on FTO glass substrates by sulphurization of nickel cobalt oxide nanoneedles (grown by a hydrothermal method) in the presence of a hydrogen sulfide and argon gas mixture. These NCS nanoneedles when used as a counter electrode for dye sensitized solar cells (DSSCs) show efficient catalytic activity towards the I-/I-3(-) redox couple, and lead to an impressive efficiency of 6.9\%, compared with 7.7\% obtained with a Pt electrode in similarly constructed devices.

}, issn = {2046-2069}, doi = {10.1039/c3ra45981k}, author = {Banerjee, Abhik and Upadhyay, Kush Kumar and Bhatnagar, Sumit and Tathavadekar, Mukta and Bansode, Umesh P. and Agarkar, Shruti A. and Ogale, Satishchandra B.} } @article { ISI:000339540700077, title = {Off-stoichiometric nickel cobaltite nanoparticles: thermal stability, magnetization, and neutron diffraction studies}, journal = {Journal of Physical Chemistry C}, volume = {118}, number = {29}, year = {2014}, month = {JUL}, pages = {16246-16254}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

In the present investigation, we report a detailed examination of the effect of off-stoichiometry introduced in NiCo2O4 by adding excess cobalt. Thus, we compare and analyze the structural and magnetic properties of the Ni075Co2.25O4 and NiCo2O4 cubic systems. A low temperature combustion method was utilized to synthesize stoichiometric (NiCo2O4) and off-stoichiometric (Ni0.75Co2.25O4) nanoparticles on a large scale. The X-ray diffraction pattern for the sample annealed at high temperature (773 K) shows the presence of a much less intense NiO phase (similar to 2-5\%) in Ni0.75Co2.25O4 as compared to that in the case of NiCo2O4 sample (similar to 15-20\%). The Ni 2p and Co 2p XPS spectra reveal the coexistence of Ni2+, Ni3+, Co2+, and Co3+ species on the surface of both the NiCo2O4 and Ni0.75Co2.23O4 samples in differing proportions. In addition to the basic magnetic characterizations using PPMS, these were also analyzed by neutron diffraction. The off-stoichiometric Ni0.75Co2.25O4 sample shows an interesting magnetic phase conversion from frustrated dipolar system to an enhanced magnetic ordering upon annealing. Local moments on the lattice sites of NiCo2O4 and Ni0.75Co2.25O4 samples are further compared by neutron diffraction confirming stronger ordered moments and enhanced structural and thermal stability for the Ni0.75Co2.25O4 sample.

}, issn = {1932-7447}, doi = {10.1021/jp504538y}, author = {Verma, Seema and Kumar, Amit and Pravarthana, D. and Deshpande, Aparna and Ogale, Satishchandra B. and Yusuf, S. M.} } @article { ISI:000342328300031, title = {Pulsed laser-deposited MoS2 thin films on W and Si: field emission and photoresponse studies}, journal = {ACS Applied Materials \& Interfaces}, volume = {6}, number = {18}, year = {2014}, month = {SEP}, pages = {15881-15888}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

We report field electron emission investigations on pulsed laser-deposited molybdenum disulfide (MoS2) thin films on W-tip and Si substrates. In both cases, under the chosen growth conditions, the dry process of pulsed laser deposition (PLD) is seen to render a dense nanostructured morphology of MoS2, which is important for local electric field enhancement in field emission application. In the case of the MoS2 film on silicon (Si), the turn-on field required to draw an emission current density of 10 mu A/cm(2) is found to be 2.8 V/mu m. Interestingly, the MoS2 film on a tungsten (W) tip emitter delivers a large emission current density of similar to 30 mA/cm(2) at a relatively lower applied voltage of similar to 3.8 kV. Thus, the PLD-MoS2 can be utilized for various field emission-based applications. We also report our results of photodiode-like behavior in (n- and p- type) Si/PLDMoS2 heterostructures. Finally we show that MoS2 films deposited on flexible kapton substrate show a good photoresponse and recovery. Our investigations thus hold great promise for the development of PLD MoS2 films in application domains such as field emitters and heterostructures for novel nanoelectronic devices.

}, keywords = {field emission, MoS2, photodiode heterostructures, pulsed laser deposition, thin film}, issn = {1944-8244}, doi = {10.1021/am503464h}, author = {Late, Dattatray J. and Shaikh, Parvez A. and Khare, Ruchita T. and Kashid, Ranjit V. and Chaudhary, Minakshi V. and More, Mahendra A. and Ogale, Satishchandra B.} } @article { ISI:000350191000002, title = {Enhancing efficiency of perovskite solar cell via surface microstructuring: superior grain growth and light harvesting effect}, journal = {Solar Energy}, volume = {112}, year = {2015}, month = {FEB}, pages = {12-19}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

We have introduced a novel approach to enhance the perovskite solar cell efficiency by controlling the grain growth and light harvesting properties of perovskite crystallites. Instead of using a mesoporous TiO2 layer, we have modified the surface microstructuring of the TiO2 film by dispensing nano assembled TiO2 submicron structures (nanobeads, NBs) on TiO2 compact layer. With this new approach solar cell efficiency was improved significantly through an increase in both J(sc) and V-oc. This high efficiency is attributed to crystallite size of the perovskite phase. These also act as light scattering centers giving higher current density and reduced recombination effects giving higher open circuit voltage. (C) 2014 Elsevier Ltd. All rights reserved.

}, keywords = {Grain growth, Light harvesting, Perovskite solar cells, TiO2 nanobeads}, issn = {0038-092X}, doi = {10.1016/j.solener.2014.11.016}, author = {Tathavadekar, Mukta C. and Agarkar, Shruti A. and Game, Onkar S. and Bansode, Umesh P. and Kulkarni, Sneha A. and Mhaisalkar, Subodh G. and Ogale, Satishchandra B.} } @article {42996, title = {High surface area porous carbon for ultracapacitor application by pyrolysis of polystyrene containing pendant carboxylic acid groups prepared via click chemistry}, journal = {Materials Today Communications}, volume = {4}, year = {2015}, month = {SEP}, pages = {166-175}, doi = {10.1016/j.mtcomm.2015.07.002}, author = {Chhatre, Shraddha and Aravindan, Vanchiappan and Puthusseri, Dhanya and Banerjee, Abhik and Madhavi, Srinivasan and Wadgaonkar, Prakash P. and Ogale, Satishchandra B.} } @article { ISI:000351551800013, title = {Hysteretic DC electrowetting by field-induced nano-structurations on polystyrene films}, journal = {Soft Matter}, volume = {11}, number = {13}, year = {2015}, month = {FEB}, pages = {2655-2664}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Electrowetting (EW) offers executive wetting control of conductive liquids on several polymer surfaces. We report a peculiar electrowetting response for aqueous drops on a polystyrene (PS) dielectric surface in the presence of silicone oil. After the first direct current (DC) voltage cycle, the droplet failed to regain Young{\textquoteright}s angle, yielding contact angle hysteresis, which is close to a value found in ambient air. We conjecture that the hysteretic EW response appears from in situ surface modification using electric field induced water-ion contact with PS surface inducing nano-structuration by electro-hydrodynamic (EHD) instability. Atomic force microscopy confirms the formation of nano-structuration on the electrowetted surface. The effects of molecular weight, applied electric field, water conductivity and pH on nano-structuration are studied. Finally, the EW based nano-structuration on PS surface is used for the enhanced loading of aqueous dyes on hydrophobic surfaces.

}, issn = {1744-683X}, doi = {10.1039/c5sm00007f}, author = {Sawane, Yogesh B. and Datar, Suwarna and Ogale, Satishchandra B. and Banpurkar, Arun G.} } @article { ISI:000350573400013, title = {Starch (Tapioca) to carbon dots: an efficient green approach to an on-off-on photoluminescence probe for fluoride ion sensing}, journal = {Analyst}, volume = {140}, number = {6}, year = {2015}, month = {FEB}, pages = {1837-1841}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Photoluminescent carbon dots of 4-5 nm size were prepared from starch (Tapioca Sago) through a solution method under mild conditions. The as-prepared carbon dots were used as photoluminescence probes for highly anion selective fluoride ion detection in aqueous solutions. A ready-to-use device is also demonstrated.

}, issn = {0003-2654}, doi = {10.1039/c4an02340d}, author = {Basu, Aniruddha and Suryawanshi, Anil and Kumawat, Begraj and Dandia, Anshu and Guin, Debanjan and Ogale, Satishchandra B.} } @article {43429, title = {CH3NH3Pb(BF4)(3) and (C4H9NH3)2Pb(BF4)(4) family of 3D and 2D perovskites without and with iodide and bromide ions substitution}, journal = {Journal of Physical Chemistry Letters}, volume = {7}, year = {2016}, month = {NOV}, pages = {4757-4762}, abstract = {We report the synthesis of fully molecular ion (BF4 )-based organicinorganic hybrid perovskite CH3NH3Pb(BF4)(3), which is a wide band gap semiconductor, and the same can be easily tuned toward the visible by the incorporation of bromide or iodide ions in the crystal framework simply by changing lead precursors. We have also successfully transformed the distorted 3D molecular-ion-induced perovskite to 2D (C4H9NH3)(2)Pb(BF4)(4), (C4H9NH3)(2)PbBr(4x)(BF4)(x), and (C4H9NH3)(2)PbI(4x)(BF4)(x) perovskites that exhibit the optical absorption over the UV to visible region. The thin films of molecular-ion-containing 2D perovskites with Br and I anions show blue and green luminescence, respectively, under UV illumination.}, doi = {10.1021/acs.jpclett.6b02121}, author = {Nagane, Satyawan and Ogale, Satishchandra B.} } @article {43425, title = {CO2 Laser direct written MOF-based metal-decorated and heteroatom-doped porous graphene for flexible all-solid-state microsupercapacitor with extremely high cycling stability}, journal = {ACS Applied Materials \& Interfaces}, volume = {8}, year = {2016}, month = {NOV}, pages = {31841-31848}, abstract = {Over the past decade, flexible and wearable microelectronic devices and systems have gained significant importance. Because portable power source is an essential need of such wearable devices, currently there is considerable research emphasis on the development of planar interdigitated micro energy-torage devices by employing diverse precursor materials to obtain functional materials (functional carbon, oxides, etc.) with the desirable set of properties. Herein we report for the first time the use of metal organic framework (MOF) and zeolitic imidazolate framework (ZIF-67) for high-wavelength photothermal laser direct writing of metal-decorated, heteroatom-doped, porous few-layer graphene electrodes for microsupercapacitor application. We argue that the specific attributes of MOF as a precursor and the high-wavelength laser writing approach (which creates extremely high localized and transient temperature (>2500 degrees C) due to strong absorption by lattice vibrations) are together responsible for the peculiar interesting properties of the carbon material thus synthesized, thereby rendering extremely high cycling stability to the corresponding microsupercapacitor device. Our device exhibits near 100\% retention after 200 000 cycles as well as stability under 150 degrees bending.}, doi = {10.1021/acsami.6b10193}, author = {Basu, Aniruddha and Roy, Kingshuk and Sharma, Neha and Nandi, Shyamapada and Vaidhyanathan, Ramanathan and Rane, Sunit and Rode, Chandrashekhar V. and Ogale, Satishchandra B.} } @article {43615, title = {Graphene based nanocomposites for alloy (SnO2), and conversion (Fe3O4) type efficient anodes for Li-ion battery applications}, journal = {Composites Science and Technology}, volume = {130}, year = {2016}, month = {JUN}, pages = {88-95}, abstract = {Two types of trigol reduced one pot synthesized graphene (TRG) based nanocomposites (SnO2-TRG, and Fe3O4-TRG) are examined as potential anodes for Lithium ion battery (LIB) applications. The two specific systems represent different electrode reaction mechanisms, namely alloying, and conversion respectively. The high resolution transmission electron microscopy (HR-TEM) analysis confirms the uniform distribution of SnO2 (similar to 2 nm), and Fe3O4 (similar to 8 nm) particulates on ultrathin TRG nanosheets and highlights the importance of surfactant free synthesis. The SnO2-TRG, and Fe3O4-TRG exhibited the maximum reversible capacity of similar to 947, and similar to 1024 mA h g(-1), respectively. The results show that such graphene based composite materials can be effectively used as prospective anodes for LIB applications. (C) 2016 Elsevier Ltd. All rights reserved.}, doi = {10.1016/j.compscitech.2016.05.008}, author = {Mhamane, Dattakumar and Aravindan, Vanchiappan and Taneja, Divya and Suryawanshi, Anil and Game, Onkar and Srinivasan, Madhavi and Ogale, Satishchandra B.} } @article { ISI:000368563000067, title = {Pt- and TCO-free flexible cathode for DSSC from highly conducting and flexible PEDOT paper prepared via in situ interfacial polymerization}, journal = {ACS Applied Materials \& Interfaces}, volume = {8}, number = {1}, year = {2016}, month = {JAN}, pages = {553-562}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Here, we report the preparation of a flexible, free-standing, Pt- and TCO-free counter electrode in dye-sensitized solar cell (DSSC)-derived from polyethylenedioxythiophene (PEDOT)-impregnated cellulose paper. The synthetic strategy of making the thin flexible PEDOT paper is simple and scalable, which can be achieved via in situ polymerization all through a roll coating technique. The very low sheet resistance (4 Omega/square) obtained from a film of 40 mu m thick PEDOT paper (PEDOT-p-5) is found to be superior to the conventional fluorine-doped tin oxide (FTO) substrate. The high conductivity (357 S/cm) displayed by PEDOT-p-5 is observed to be stable under ambient conditions as well as flexible and bending conditions. With all of these features in place, we could develop an efficient Pt- and TCO-free flexible counter electrode from PEDOT-p-5 for DSSC applications. The catalytic activity toward the tri-iodide reduction of the flexible electrode is analyzed by adopting various electrochemical methodologies. PEDOT-p-5 is found to display higher exchange current density (7.12 mA/cm(2)) and low charge transfer resistance (4.6 Omega) compared to the benchmark Pt-coated FTO glass (2.40 mA/cm(2) and 9.4 Omega, respectively). Further, a DSSC fabricated using PEDOT-p-5 as the counter electrode displays a comparable efficiency of 6.1\% relative to 6.9\% delivered by a system based on Pt/FTO as the counter electrode.

}, keywords = {counter electrode, dye-sensitized solar cell, flexible and thin devices, impedance analysis, interfacial polymerization, polyethylenedioxythiophene}, issn = {1944-8244}, doi = {10.1021/acsami.5b09579}, author = {Anothumakkool, Bihag and Agrawal, Ishita and Bhange, Siddheshwar N. and Soni, Roby and Game, Onkar S. and Ogale, Satishchandra B. and Kurungot, Sreekumar} } @article {43602, title = {Red mud and li-ion batteries: a magnetic connection}, journal = {Chemsuschem}, volume = {9}, year = {2016}, month = {AUG}, pages = {2193-2200}, abstract = {Exceptional Li-ion battery performance is presented with the oxide component of the anode was extracted from red mud by simple magnetic separation and applied directly without any further processing. The extracted material has -Fe2O3 as the major phase with inter-dispersed phases of Ti, Al, and Si oxides. In a half-cell assembly, the phase displayed a reversible capacity (approximate to 697mAhg(-1)) with excellent stability upon cycling. Interestingly, the stability is rendered by the multiphase constitution of the material with the presence of other electrochemically inactive metal oxides, such as Al2O3, SiO2, and Fe2TiO4, which could accommodate the strain and facilitate release during the charge-discharge processes in the electrochemically active maghemite component. We fabricated the full-cell assembly with eco-friendly cathode LiMn2O4 by adjusting the mass loading. Prior to full-cell assembly, an electrochemical pre-lithiation was enforced to overcome the irreversible capacity loss obtained from the anode. The full-cell delivered a capacity of approximate to 100mAhg(-1) (based on cathode loading) with capacity retention of approximate to 61\% after 2000cycles under ambient conditions.}, doi = {10.1002/cssc.201600561}, author = {Suryawanshi, Anil and Aravindan, Vanchiappan and Madhavi, Srinivasan and Ogale, Satishchandra B.} } @article {43579, title = { Robust highly flexible all-solid-state micro pseudocapacitor based on ternary oxide CuCo2O4 having ultrathin porous nanowall type morphology blended with CNT}, journal = {Chemistryselect}, volume = {1}, year = {2016}, month = {OCT}, pages = {5159-5164}, abstract = {In this work we demonstrate a facile approach to the fabrication of all solid state flexible interdigitated micro pseudocapacitor device using pre-synthesized CuCo2O4 (CCO) ternary metal oxide as the electrode material. The hydrothermally synthesized CCO exhibits a peculiar 3D interconnected aligned porous nanowall type morphology which is highly desirable for storage as well as charge transfer. The device is fabricated using CO2 laser scribing technique and the PVA-H3PO4 gel electrolyte is used as the electrolyte. The as-synthesized CCO as well as its blend with 10 wt.\% CNT are examined for the electrochemical performance. CNT blending is shown to reduce the charge transfer resistance dramatically, thereby enhancing the pseudo capacitance. The areal capacitance of 2.29 mF cm(-2) is obtained from the solid state device. Moreover, the CCO-CNT electrode also shows a high stability upto 9000 cycles without a sign of further decay. Importantly, the devices also retain over 65\% of their initial capacitance after 1000 large angle (608) bending cycles and 93\% of the initial capacitance under 1208 bending condition, thanks to the mechanical flexibility afforded by CNTs without disrupting conducting paths.}, doi = {10.1002/slct.201601348}, author = {Basu, Aniruddha and Bhardwaj, Monika and Gawli, Yogesh and Rode, Chandrasekhar V. and Ogale, Satishchandra B.} } @article { ISI:000373619000021, title = {Synthesis, microstructure, optical and field emission studies of iron vanadium oxide nanosheets}, journal = {Journal of Physics D-Applied Physics}, volume = {49}, number = {14}, year = {2016}, month = {APR}, pages = {145301}, publisher = {IOP PUBLISHING LTD}, address = {TEMPLE CIRCUS, TEMPLE WAY, BRISTOL BS1 6BE, ENGLAND}, abstract = {

We report a single step growth of thin graphene-like, densely packed FeV3O8 (FVO) nanosheets on silicon substrates via facile hydrothermal synthesis. These nanosheets have dimensions of a few microns with thin edges, offering very high aspect ratio. These FVO nanosheets exhibit excellent field emission behaviour with low turn on and threshold voltages of 1.3 V mu m(-1) and 1.7 V mu m(-1), respectively. The corresponding emitter delivers high emission current density of (similar to 1.650 mA cm(-2)) at fairly low applied field (similar to 4.00 V mu m(-1)).

}, keywords = {FeV3O8, field emission, nanosheets}, issn = {0022-3727}, doi = {10.1088/0022-3727/49/14/145301}, author = {Badadhe, Satish S. and Suryawanshi, Sachin R. and Naphade, Rounak A. and Chaudhary, Minakshi V. and More, Mahendra A. and Shelke, Manjusha V. and Ogale, Satishchandra B.} } @article {43850, title = {Hexaphosphate-derived phosphorus-functionalized carbon for lithium-ion battery anode}, journal = {Chemistryselect}, volume = {2}, year = {2017}, month = {JUL}, pages = {5600-5607}, type = {Article}, abstract = {

We show that high-temperature annealing of a dried hexaphosphate, namely phytic acid, renders activated (micro-porous) and phosphorus-functionalized graphene like carbon in a one-step process. At high enough temperature few volatile phosphates serve as porogen-forming entities while other groups reactively functionalize the carbon surface. The optimized material has high effective surface area due to the presence of defect states. As an anode material for Li-ion battery, it exhibits a reversible capacity that is double that of the graphite and is stable for 1000 cycles even at a high current of 5 A g(-1). This result is attributed to the concurrent presence of micropores and phosphorus containing groups in the carbon matrix.

}, doi = {10.1002/slct.201700909}, author = {Gawli, Yogesh and Wahid, Malik and Fernandez, Rohan and Kothari, Dushyant and Shelke, Manjusha and Ogale, Satishchandra B.} } @article {43988, title = {High quality hybrid perovskite semiconductor thin films with remarkably enhanced luminescence and defect suppression via quaternary alkyl ammonium salt based treatment}, journal = {Advanced Materials Interfaces}, year = {2017}, month = {JUL}, type = {Article}, abstract = {Significant enhancement in the luminescence and superior photophysical properties of CH3NH3PbBr3 thin films prepared via simple single step spin coating process involving a novel additive mediated solvent extraction step is reported. This process results in significantly lower disorder in CH3NH3PbBr3 perovskites with Urbach energies reducing from ≈35 to ≈17 meV, which is the lowest reported value to date. The additive mediated process also results in a remarkable improvement in the photoluminescence quantum yields (PLQYs) from 1\% to 30\%. Coupled with the overall increase in surface roughness, a significant increase in the internal PLQY from 7\% to 77\% is estimated, indicating the superior quality of the treated thin films. The resultant high quality CH3NH3PbBr3 perovskites with remarkable photophysical properties can be used in realizing highly efficient optoelectronic devices. Highly efficient light emitting diodes using these perovskites are demonstrated here.}, doi = {10.1002/admi.201700562}, author = {Naphade, Rounak A. and Zhao, Baodan and Richter, Johannes M. and Booker, Edward and Krishnamurthy, Shrreya and Friend, Richard H. and Sadhanala, Aditya and Ogale, Satishchandra B.} } @article {43522, title = {On-axis pulsed laser deposition of hybrid perovskite films for solar cell and broadband photo-sensor applications}, journal = {Journal of Applied Physics}, volume = {121}, year = {2017}, month = {APR}, pages = {Article Number: 133107}, abstract = {High quality hybrid perovskite films are grown by the pulsed laser deposition (PLD) process through target stoichiometry and gas ambient control in the commonly used on-axis geometry which is compatible with PLD of other materials such as metal oxides. The use of an off-stoichiometric target and a momentum softening gas mixture of argon and hydrogen (90\%:10\%) is shown to yield dense films in the on-axis geometry with excellent stoichiometry and optical quality. The band gap can be easily tuned from 1.6 to 2.3 eV with either mixed halide composite target or successive depositions of inter-diffusing MAPbBr(3) and MAPbI(3) layers. A photosensor based on PLD grown MAPbI(3) is shown to render impressive performance over the broad range of wavelengths from 375 to 800 nm at a voltage of 5V bias. A planar heterojunction solar cell based on the dry-processed on-axis PLD grown film exhibits a champion conversion efficiency of 10.9\%. A heterostructure comprising in situ pulsed laser deposited Cu2O (p-type) followed by the hybrid perovskite film shows a rectifying characteristic and photoresponse.}, doi = {10.1063/1.4979865}, author = {Bansode, Umesh and Ogale, Satishchandra B.} }