@article {44616, title = {Flexible composite mechanical energy harvester from a ferroelectric organoamino phosphonium salt}, journal = {Angewandte Chemie-International Edition}, volume = {57}, year = {2018}, month = {JUL}, pages = {9054-9058}, abstract = {

A new binary organic salt diphenyl diisopropylamino phosphonium hexaflurophosphate (DPDPPF6) was shown to exhibit a good ferroelectric response and employed for mechanical energy harvesting application. The phosphonium salt crystallizes in the monoclinic noncentrosymmetric space group Cc and exhibits an H-bonded 1D chain structure due to N-HF interactions. Ferroelectric measurements on the single crystals of DPDPPF6 gave a well-saturated rectangular hysteresis loop with a remnant (P-r) polarization value of 6Ccm(-2). Further, composite devices based on polydimethylsiloxane (PDMS) films for various weight percentages (3, 5, 7, 10 and 20wt\%) of DPDPPF6 were prepared and examined for power generation by using an impact test setup. A maximum output peak-to-peak voltage (V-PP) of 8.5V and an output peak-to-peak current (I-PP) of 0.5A was obtained for the non-poled composite film with 10wt\% of DPDPPF6. These results show the efficacy of organic ferroelectric substances as potential micropower generators.

}, keywords = {binary phosphonium salts, energy conversion, ferroelectricity, hydrogen bonding, polymer composites}, issn = {1433-7851}, doi = {10.1002/anie.201805479}, author = {Vijayakanth, Thangavel and Srivastava, Anant Kumar and Ram, Farsa and Kulkarni, Priyangi and Shanmuganathan, Kadhiravan and Praveenkumar, Balu and Boomishankar, Ramamoorthy} } @article {46893, title = {Piezoelectric energy harvesting from a ferroelectric hybrid salt [Ph3MeP](4)[Ni(NCS)(6)] embedded in a polymer matrix}, journal = {Angewandte Chemie-International Edition}, volume = {59}, year = {2020}, month = {JUN }, pages = {10368-10373}, type = {Article}, abstract = {

Organic-inorganic hybrid ferroelectrics are an exciting class of molecular materials with promising applications in the area of energy and electronics. The synthesis, ferroelectric and piezoelectric energy harvesting behavior of a 3d metal ion-containing A(4)BX(6) type organic-inorganic hybrid salt [Ph3MeP](4)[Ni(NCS)(6)] (1) is now presented. P-E hysteresis loop studies on 1 show a remnant ferroelectric polarization value of 18.71 mu C cm(-2), at room temperature. Composite thermoplastic polyurethane (TPU) devices with 5, 10, 15 and 20 wt \% compositions of 1 were prepared and employed for piezoelectric energy harvesting studies. A maximum output voltage of 19.29 V and a calculated power density value of 2.51 mW cm(-3) were observed for the 15 wt \% 1-TPU device. The capacitor charging experiments on the 15 wt \% 1-TPU composite device shows an excellent energy storage performance with the highest stored energies and measured charges of 198.8 mu J and 600 mu C, respectively.

}, keywords = {energy conversion, mechanical properties, non-covalent interactions, organic-inorganic hybrid composites, Phosphorus}, issn = {1433-7851}, doi = {10.1002/anie.202001250, Early Access Date = APR 2020}, author = {Vijayakanth, Thangavel and Ram, Farsa and Praveenkumar, Balu and Shanmuganathan, Kadhiravan and Boomishankar, Ramamoorthy} } @article {49140, title = { Ferroelectric aminophosphonium cyanoferrate with a large electrostrictive coefficient as a piezoelectric nanogenerator}, journal = {Angewandte Chemie-International Edition}, volume = {62}, year = {2023}, month = {JAN }, type = {Article}, abstract = {

Hybrid materials possessing piezo- and ferroelectric properties emerge as excellent alternatives to conventional piezoceramics due to their merits of facile synthesis, lightweight nature, ease of fabrication and mechanical flexibility. Inspired by the structural stability of aminophosphonium compounds, here we report the first A(3)BX(6) type cyanometallate [Ph-2((PrNH)-Pr-i)(2)P](3)[Fe(CN)(6)] (1), which shows a ferroelectric saturation polarization (P-s) of 3.71 mu C cm(-2). Compound 1 exhibits a high electrostrictive coefficient (Q(33)) of 0.73 m(4) C-2, far exceeding those of piezoceramics (0.034-0.096 m(4) C-2). Piezoresponse force microscopy (PFM) analysis demonstrates the polarization switching and domain structure of 1 further confirming its ferroelectric nature. Furthermore, thermoplastic polyurethane (TPU) polymer composite films of 1 were prepared and employed as piezoelectric nanogenerators. Notably, the 15 wt \% 1-TPU device gave a maximum output voltage of 13.57 V and a power density of 6.03 mu W cm(-2).

}, keywords = {Cyanometallates, energy conversion, H-bonding, hybrid composites, Phosphorus}, issn = {1433-7851}, doi = {10.1002/anie.202214984}, author = {Vijayakanth, Thangavel and Sahoo, Supriya and Kothavade, Premkumar and Sharma, Vijay Bhan and Kabra, Dinesh and Zareba, Jan K. K. and Shanmuganathan, Kadhiravan and Boomishankar, Ramamoorthy} }