@article {46789,
	title = {Nanocellulose reinforced flexible composite nanogenerators with enhanced vibrational energy harvesting and sensing properties},
	volume = {2},
	year = {2020},
	month = {JUL},
	pages = {2550-2562},
	type = {Article},
	abstract = {<p>We report here enhanced vibration and pressure sensing properties of nanocellulose reinforced flexible composite piezoelectric nanogenerators (PENGs). Surface fluorinated nanocellulose crystals (FNC) were incorporated into poly(vinylidene fluoride) (PVDF) and electrospun into composite nanofibers. Incorporation of only 2 wt \% FNC in PVDF resulted in a significant enhancement in pressure sensitivity with a very low detectable pressure limit of 10 Pa and a sensitivity of up to 18 mV/kPa. The composite PENGs also demonstrated very high sensitivity for forced continuous vibrations. 2FNC/PVDF composites resulted in an order of magnitude higher voltage response over neat PVDF for a given strain. When PENGs were mounted on a vacuum pump for transduction of mechanical vibrations into electrical energy, 2FNC/PVDF composite devices manifested similar to 3.8 times enhanced voltage output over neat PVDF and faster charging of a capacitor. The enhanced piezoelectric properties of PVDF/FNC nanocomposites could be attributed to the tailored interface between PVDF and nanocellulose and enhanced polarizability.</p>
},
	keywords = {Composite, Nanofiber, piezoelectric, pressure, Sensor, vibration},
	issn = {2637-6105},
	doi = {10.1021/acsapm.0c00158},
	author = {Ram, Farsa and Gudadhe, Aniket and Vijayakanth, Thangavel and Aherrao, Swapnil and Borkar, Vivek and Boomishankar, Ramamoorthy and Shanmuganathan, Kadhiravan}
}
@article {48790,
	title = {Luminescent 3D printed poly(lactic acid) nanocomposites with enhanced mechanical properties},
	journal = {Polymer Engineering and Science},
	volume = {63},
	year = {2023},
	month = {JUL},
	pages = {2059-2072},
	type = {Article},
	abstract = {<p>
	The three-dimensional (3D) printing of functional composite materials has gained tremendous interest in recent years. Nevertheless, research on 3D printing of luminescent composite materials is very limited, and the mechanical properties of such 3D-printed composites are poor. Herein, we report the preparation and characterization of a poly(lactic acid) (PLA) composite that, when 3D printed, exhibits enhanced toughness and high solid-state fluorescence quantum yield. Incorporation of only 1 wt\% pyrene butyric acid modified cellulose nanofibers (PBA-m-CNF) and l0 wt\% thermoplastic polyurethane (TPU) into PLA led to 223\% increase in toughness and 21\% increase in tensile modulus of PLA. Scanning electron microscopy (SEM) and X-ray microcomputed tomography (mu-CT) analysis of the fractured cross-sections of 3D printed composites revealed a ductile failure mode. The PLA/PBA-m-CNF1/TPU10 3D printed composite also exhibited a high solid-state fluorescence quantum yield of 38.35\%. To the best of our knowledge, this is the first report to show both enhanced mechanical properties and high solid-state fluorescence emission for 3D printable PLA. Such functional PLA composites could have potential applications in the fabrication of complex-shaped sensors, optical light pipes, etc.</p>
},
	keywords = {3D printing, Composite, fluorescence, Nanocellulose, poly(lactic acid), toughness},
	issn = {0032-3888},
	doi = {10.1002/pen.26345},
	author = {Kothavade, Premkumar Anil and Yadav, Prashant and Nidhankar, Aakash D. and Torris, Arun and Pol, Harshawardhan and Kafi, Abdullah and Bateman, Stuart and Sukumaran, Santosh Babu and Shanmuganathan, Kadhiravan}
}
