@article { ISI:000246158300001, title = {Coprecipitation technique to prepare CoTa2O6 and CoNb2O6}, journal = {Materials Letter}, volume = {61}, number = {11-12}, year = {2007}, month = {MAY}, pages = {2127-2129}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

An aqueous solution of sodium hydroxide was used to coprecipitate cobalt and tantalum (or niobium) ions from their precursors as hydroxides under basic conditions. This precipitate yielded CoTa2O6 (CT) or CoNb2O6 (CN) ceramics on calcining at 700 degrees C, i.e. at a temperature much lower than 900 degrees C, reported for the formation of these powders prepared by the traditional solid state method. The X-ray diffraction (XRD) studies were employed to investigate phase contents and lattice parameters. The morphology of the synthesized powders was investigated by transmission electron microscopy (TEM). (c) 2006 Elsevier B.V. All rights reserved.

}, keywords = {Chemical synthesis, electronic materials, Oxides, X-ray methods}, issn = {0167-577X}, doi = {10.1016/j.matlet.2006.08.024}, author = {Mulla, Imtiaz S. and Natarajan, N. and Gaikwad, A. B. and Samuel, V. and Guptha, U. N. and Ravi, V.} } @article { ISI:000259420300006, title = {Facile synthesis and gas sensing properties of nanotriangular tin oxide}, journal = {Materials Letters}, volume = {62}, number = {28}, year = {2008}, month = {NOV}, pages = {4328-4331}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

In the present study we report a simple and convenient chemical route using pentaerythritol as a structure-directing agent for the synthesis of crystalline nanotriangular SnO2. We propose the scheme for the formation of nanotriangular structures wherein the preliminary spherical nanocrystallites are formed due to the low surface energy associated with them. These spherical nanocrystallites grow into the various linear intermediate shapes like Y, bi and tripods, which finally lead to the triangles, pyramids and bipyramids. Such variation in the structure occurs due to the structure directing pentaerythritol. These polycrystalline SnO2 nanomaterials with structural peculiarities were tested for the gas sensing characteristics. Their response towards ethanol vapor, H-2 and LPG were investigated. It was found to exhibit high response towards ethanol vapors at the operating temperature of 250 degrees C. (C) 2008 Elsevier B.V. All rights reserved.

}, keywords = {Nanomaterials, Oxides, Semiconductors, sensors}, issn = {0167-577X}, doi = {10.1016/j.matlet.2008.07.021}, author = {Deshmukh, Rupali G. and Badadhe, Satish S. and Vaishampayan, Mukta V. and Mulla, Imtiaz S.} } @article { ISI:000255612400002, title = {Preparation of ferroelectric CaBi(4)Ti(4)O(15) powders from novel hydroxide precursors}, journal = {Materials Letters}, volume = {62}, number = {12-13}, year = {2008}, month = {APR}, pages = {1751-1753}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Ferroelectric CaBi(4)Ti(4)O(15) (CBT) powders were prepared for the first time from their respective hydroxides. Commercially purchased Ca(OH)(2) is mixed thoroughly with freshly prepared Bi(OH)(3) and Ti(OH)(4) in stoichiometrie ratio and heated at different temperatures ranging from 100 to 600 degrees C. The CBT phase found to be formed at 500 degrees C by the X-ray diffraction studies. This is the lowest temperature so far reported in the literature for the formation of CBT phase. The advantage of this method is that it also avoids the formation of calcium carbonate phase during synthesis. The phase contents and lattice parameters were studied by the powder X-ray diffraction (XRD) method. The average particle size and morphology were studied by scanning electron microscopy (SEM) technique. (c) 2007 Elsevier B.V All rights reserved.

}, keywords = {CaBi(4)Ti(4)O(15), Ceramics, Chemical synthesis, Electron microscopy, Oxides, X-ray methods}, issn = {0167-577X}, doi = {10.1016/j.matlet.2007.09.080}, author = {Deshmukh, Rupali G. and Vaishampayan, Mukta V. and Darshane, Sonali L. and Mulla, Imtiaz S. and Gaikwad, A. B. and Rao, N. Kotaserwara and Ravi, V.} } @article { ISI:000264969200041, title = {Microwave-assisted synthesis and humidity sensing of nanostructured alpha-Fe2O3}, journal = {Materials Research Bulletin}, volume = {44}, number = {5}, year = {2009}, month = {MAY}, pages = {1179-1182}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Nanocrystalline alpha-Fe2O3 has been prepared on a large-scale by a facile microwave-assisted hydrothermal route from a solution of Fe(NO3)(3)center dot 9H(2)O and pentaerythritol. A systematic study of the morphology, crystallinity and oxidation state of Fe using different characterization techniques. Such as transmission electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy was performed It reveals. that nanostructured alpha-Fe2O3 comprises bundles of nanorods with a rhombohedral crystalline Structure. The individual nanorod has 8-10 nm diameter and similar to 50 nm length. The as-prepared nanostructured alpha-Fe2O3 (sensor) gives selective response towards humidity. The sensor shows high sensitivity, fast linear response to change in the humidity with almost 100\% reproducibility. The sensor works at room temperature and rejuvenates without heat treatment. The as-prepared nanostructured alpha-Fe2O3 appears to be a promising humidity sensing material with the potential for commercialization. (C) 2008 Elsevier Ltd. All rights reserved.

}, keywords = {Chemical synthesis, Electrical properties, Nanostructures, Oxides, X-ray diffraction}, issn = {0025-5408}, doi = {10.1016/j.materresbull.2008.09.044}, author = {Deshmukh, Rupali G. and Badadhe, Satish S. and Mulla, Imtiaz S.} }