@article { ISI:000273709600061, title = {Gas sensing properties of magnesium ferrite prepared by co-precipitation method}, journal = {Journal of Alloys and Compounds}, volume = {488}, number = {1}, year = {2009}, month = {NOV}, pages = {270-272}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Polycrystalline magnesium ferrite (MgFe(2)O(4)) was prepared by the co-precipitation method. The synthesized compound was characterized for their phase and morphology by X-ray diffraction and scanning electron microscopy, respectively. Conductance responses of the (MgFe(2)O(4)) were measured towards gases like hydrogen sulfide (H(2)S), liquefied petroleum gas (LPG), ethanol vapors (C(2)H(5)OH), SO(x), H(2), NO(x), NH(3), methanol, acetone and petrol. The gas sensing characterstics were obtained by measuring the sensitivity as a function of various controlling factors like operating temperatures and concentrations of gases. It was found that the sensor exhibited various responses towards these gases at different operating temperatures. Furthermore; the MgFe(2)O(4) based sensor exhibited a fast response and a good recovery towards petrol at temperature 250 degrees C. The results of the response towards petrol reveal that (MgFe(2)O(4)) synthesized by a simple co-precipitation method, would be a suitable material for the fabrication of the petrol sensor. (C) 2009 Published by Elsevier B.V.

}, keywords = {Ferrites, Gas sensor, X-ray diffraction and scanning electron microscopy}, issn = {0925-8388}, doi = {10.1016/j.jallcom.2009.08.103}, author = {Hankare, P. P. and Jadhav, S. D. and Sankpal, U. B. and Patil, R. P. and Sasikala, R. and Mulla, Imtiaz S.} } @article { ISI:000318577600145, title = {Liquefied petroleum gas sensing performance of cerium doped copper ferrite}, journal = {Ceramics International}, volume = {39}, number = {5}, year = {2013}, month = {JUL}, pages = {5901-5907}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

Undoped and cerium (Ce) doped nanocrystalline copper ferrite (CuFe2O4) materials were synthesized via the molten-salt (M-S) method. Effects of Ce doping on the structural, morphological and gas sensing properties of the CuFe2O4 ferrite have been investigated. X-ray diffraction (XRD) analysis revealed the formation of spinel CuFe2O4. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) investigations showed that the synthesized ferrite is made up of very fine spherical nanoparticles. Moreover, the gas sensing properties of sintered samples were studied towards different reducing gases such as liquefied petroleum gas (LPG), acetone, ethanol and ammonia. The sample with 4\% cerium doped CuFe2O4 (Ce4) showed the maximum gas sensitivity (86\%) towards LPG with fast response time of 5 s and good recovery time of 68 s. (C) 2013 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

}, keywords = {Ferrite, Gas sensor, Molten-salt method, TEM}, issn = {0272-8842}, doi = {10.1016/j.ceramint.2013.01.010}, author = {Khandekar, M. S. and Tarwal, N. L. and Patil, J. Y. and Shaikh, F. I. and Mulla, Imtiaz S. and Suryavanshi, S. S.} } @article { ISI:000330820500057, title = {Nanocrystalline Ce doped CoFe2O4 as an acetone gas sensor}, journal = {Ceramics International}, volume = {40}, number = {1, A}, year = {2014}, month = {JAN}, pages = {447-452}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

Nanocrystalline CoFe2-xCexO4 ferrites (x=0, 0.04, 0.08) were synthesized by using the inexpensive, simple and eco-friendly molten-salt (M-S) method. Effects of Ce doping on the structural, morphological and gas sensing properties of the CoFe2O4 ferrite were investigated. X-ray diffraction (XRD) analysis revealed the formation of spinel CoFe2O4. Transmission electron microscopy (TEM) investigations showed that the synthesized ferrite is made up of very fine spherical nanoparticles. Furthermore, the gas response of nanocrystalline ferrite materials was investigated in the temperature range of 200-450 degrees C toward the reducing gases like liquefied petroleum gas (LPG), acetone, ethanol and ammonia. The sensor response was found to be sensitive and selective toward acetone as compared to other reducing gases. It is observed that the addition of Ce (4 wt\%) strongly influenced the response and the operating temperature of the sensor material and thus can serve as acetone-sensing sensors. (C) 2013 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

}, keywords = {CoFe2O4, Ferrite, Gas sensor, Molten-salt method, TEM}, issn = {0272-8842}, doi = {10.1016/j.ceramint.2013.06.021}, author = {Khandekar, M. S. and Tarwal, N. L. and Mulla, Imtiaz S. and Suryavanshi, S. S.} } @article { ISI:000345895200048, title = {Effect of Pd and Ce on the enhancement of ethanol vapor response of SnO2 thick films}, journal = {Sensors and Actuators B-Chemical}, volume = {207}, number = {A}, year = {2015}, month = {FEB}, pages = {383-390}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

The undoped SnO2 and 4 wt\% Ce-doped SnO2 were successfully synthesized by a facile co-precipitation route. The ternary systems were prepared by Pd-loading (0.5, 1.5 and 3.0 wt\%) on the 4 wt\% Ce-doped SnO2 nanoparticles. The structure and morphology of the nanocrystalline powders were investigated by X-ray diffraction, scanning electron microscopy and transmission electron microscopy techniques. The nanocrystalline powders were screen printed on the alumina substrates to form thick films to investigate their gas response properties. The gas response studies reveal that 4 wt\% Ce-doped SnO2 with the loading of 3.0 wt\% Pd exhibits high response (88\%) towards ethanol (100 ppm) at an operating temperature of 250 degrees C with quick response (6 s) and rapid recovery (20 s). The high ethanol vapor response at lower operating temperature of this sensor is attributed to the spill-over mechanism of Pd particles present on the SnO2 surface and enhancement in alkalescence of SnO2 due to Ce-doping. (C) 2014 Elsevier B.V. All rights reserved.

}, keywords = {Ce-doped tin oxide, Gas sensor, Semiconductor, Thick film}, issn = {0925-4005}, doi = {10.1016/j.snb.2014.10.021}, author = {Bagal, L. K. and Patil, J. Y. and Vaishampayan, M. V. and Mulla, Imtiaz S. and Suryavanshi, S. S.} }