@article { ISI:000316064700007, title = {Structural and catalytic properties of a novel vanadium containing solid core mesoporous silica shell catalysts for gas phase oxidation reaction}, journal = {Journal of Chemical Sciences}, volume = {125}, number = {1}, year = {2013}, month = {JAN}, pages = {63-69}, publisher = {INDIAN ACAD SCIENCES}, address = {C V RAMAN AVENUE, SADASHIVANAGAR, P B \#8005, BANGALORE 560 080, INDIA}, abstract = {

A novel vanadium containing solid core mesoporous silica shell catalyst was synthesized with different Si/V ratios by sol-gel method under neutral conditions. The synthesized materials were characterized by various techniques and gas phase diphenyl methane oxidation reaction. The mesoporosity combined with microporosity are formed by incorporation of octadecyltrichloro silane and triethylamine in the catalyst and it was found out from E-DAX and BET-surface area analysis. The material was found to be nanocrystalline. Vanadium is present as V4 + species in as-synthesized samples and convert to V5 + on calcination. Most of the vanadium is present in tetrahedral or square pyramidal environment. Incorporation of vanadium in silica framework was confirmed by Si-29 MAS NMR analysis. Among the various vanadium containing solid core mesoporous silica shell catalysts, the Si/V = 100 ratio exhibited maximum efficiency towards diphenyl methane to benzophenone gas phase reaction. The optimum condition required for maximum conversion and selectivity was found out from the catalytic studies.

}, keywords = {diphenylmethane, Gas phase oxidation, vanadium containing solid core mesoporous silica shell}, issn = {0974-3626}, doi = {10.1007/s12039-013-0365-2}, author = {Venkatathri, N. and Pillai, Vijayamohanan K. and Rajini, A. and Raju, M. Nooka and Reddy, I. A. K.} } @article { ISI:000343715000091, title = {Influence of method of preparation on the activity of La-Ni-Ce mixed oxide catalysts for dry reforming of methane}, journal = {RSC Advances}, volume = {4}, number = {91}, year = {2014}, month = {OCT}, pages = {50226-50232}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

La-Ni-x-Ce1-x mixed oxide catalysts were prepared by a sol-gel method varying the Ni composition (0 \<= x \<= 1). The catalysts were characterized by X-ray diffraction (XRD), inductively coupled plasma optical emission spectroscopy (ICP-OES), BET surface area, X-ray photoelectron spectroscopy (XPS), temperature-programmed reduction (TPR), H-2 chemisorption and Fourier transform infrared spectroscopy (FT-IR) techniques. CO2 reforming of methane was carried out at atmospheric pressure and 800 degrees C, maintaining a reactant CO2/CH4/N-2 ratio of 80/80/80 (total flow rate = 240 ml min(-1), GHSV of 28 800 h(-1)). The catalysts offered higher activity even at lower Ni compositions. LaNi0.4Ce0.6O3. showed the highest conversion of CH4 and CO2. The H-2/CO ratio in the syngas was stable at 0.85 +/- 0.02. The performance of the sol-gel catalysts was compared with that of the hydrothermally prepared catalysts, reported earlier. High surface area and better Ni dispersion were found to be the reasons for superior activity of the sol-gel catalysts.

}, issn = {2046-2069}, doi = {10.1039/c4ra07098d}, author = {Sagar, T. V. and Sreelatha, N. and Hanmant, G. and Surendar, M. and Lingaiah, N. and Rao, K. S. Rama and Satyanarayana, C. V. V. and Reddy, I. A. K. and Prasad, P. S. Sai} } @article { ISI:000334984000005, title = {Methane reforming with carbon dioxide over La-Ni-x-Ce1-x mixed oxide catalysts}, journal = {Indian Journal of Chemistry Section A-Inorganic Bio-Inorganic Physical Theoretical \& Analytical Chemistry}, volume = {53}, number = {4-5, SI}, year = {2014}, month = {FEB}, pages = {478-483}, publisher = {NATL INST SCIENCE COMMUNICATION-NISCAIR}, address = {DR K S KRISHNAN MARG, PUSA CAMPUS, NEW DELHI 110 012, INDIA}, abstract = {

La-Ni-x-Ce1-x mixed oxide (0 \<= x \<= 1) catalysts have been hydrothermally prepared, characterized by physico-chemical techniques and evaluated for CO2 reforming of methane. High conversions are achieved for both methane and carbon dioxide over the LaNi0.6Ce0.4O3 catalyst tested under the conditions of CO2/CH4/N-2 ratio of 80/80/80. (total flow rate = 240 mL/min), space velocity of 28,800 h(-1) and at a temperature of 800 degrees C. The H-2/CO ratio in the syngas is stable at 0.93 +/- 0.02. Exchanging Ni with Ce, rather than with La as reported in the literature, appears to be a better option for the improved performance of the catalysts.

}, keywords = {Carbon dioxide reforming, Catalysts, Cerium, Dry reforming, Hydrothermal synthesis, Lanthanum, Methane reforming, Mixed oxides, Nickel}, issn = {0376-4710}, author = {Sagar, T. V. and Sreelatha, N. and Hanmant, G. and Upendar, K. and Lingaiah, N. and Rao, Kamaraju Seetha Rama and Satyanarayana, C. V. V. and Reddy, I. A. K. and Prasad, P. S. Sai} }