@article { ISI:000236423600081, title = {Synthesis and characterization of aromatic copolyesters containing siloxane linkages in the polymer backbone}, journal = {Journal of Applied Polymer Science}, volume = {100}, number = {4}, year = {2006}, month = {MAY}, pages = {3222-3228}, publisher = {JOHN WILEY \& SONS INC}, type = {Article}, address = {111 RIVER ST, HOBOKEN, NJ 07030 USA}, abstract = {

A new series of aromatic copolyesters containing siloxane linkages were prepared by the melt polymerization of bisphenol A (BPA) with eugenol end-capped siloxane (EuSi), diphenyl terephthalate (DPT), and diphenyl isoplithalate (DPI) in varying ratio in the temperature range 220-290 degrees C under reduced pressure in the presence of dibutyl tin dilaurate (DBTL) catalyst. The siloxane copolyesters prepared were characterized by FTIR, H-1-NMR spectroscopy, solution viscosity, thermogravimetric analysis, differential scanning calorimetry, and X-ray diffraction. The effect of incorporation of eugenol end-capped siloxane was studied on the properties of BPA/DPI/DPT copolyesters. The glass-transition temperature of copolyester was decreased from 184 to 70 degrees C by incorporation of 20\% of eugenol endcapped siloxane. All copolyesters were found to be soluble in commonly used aprotic polar solvents and had film-forming properties. (c) 2006 Wiley Periodicals, Inc.

}, keywords = {aromatic copolyesters, Bisphenol A, diphenyl isophthalate, diphenyl terephthalate, eugenol end-capped siloxane, melt polymerization}, issn = {0021-8995}, doi = {10.1002/app.22266}, author = {Waghmare, P. B. and Idage, Susheela B. and Menon, Shamal K. and Idage, Bhaskar B.} } @article { ISI:000237680000010, title = {Synthesis and characterization of copolyarylates using tin octoate as a catalyst}, journal = {Journal of Applied Polymer Science}, volume = {101}, number = {1}, year = {2006}, month = {JUL}, pages = {70-77}, publisher = {JOHN WILEY \& SONS INC}, type = {Article}, address = {111 RIVER ST, HOBOKEN, NJ 07030 USA}, abstract = {

A series of copolyarylates of bisphenol A (BPA) with varying ratios of diphenyl terephthalate (DPT) and diphenyl isophthalate (DPI) were prepared by melt polymerization at a temperature ranging from 200 to 290 degrees C under reduced pressure in the presence of tin octoate catalyst. Tin octoate catalyst has been extensively used for the preparation of biodegradable polymers namely, poly(lactic acid), poly(glycolic acid), and poly(lactide-glycolide) copolyesters. However, there are no reports on the preparation of copolyesters by melt polymerization using tin octoate catalyst. The effect of tin octoate catalyst was studied on the preparation of BPA/DPT/DPI copolyarylates. The copolyarylates were characterized by infrared and H-1 NMR spectroscopy, solution viscosity, thermogravimetric analysis, differential scanning calorimetry, and X-ray diffraction. The solution viscosities of copolyarylates were varied from 0.43 to 0.56 dL/g and the glass transition temperature (T-g) of copolyarylates was varied from 155 to 222 degrees C by varying the ratio of DPT and DPI. Most of the copolyarylates were found to be soluble in commonly used organic solvents and had film-forming properties. (c) 2006 Wiley Periodicals, Inc.

}, keywords = {copolyarylates, diphenyl isophthalate, diphenyl terephthalate, melt polymerization, tin octoate}, issn = {0021-8995}, doi = {10.1002/app.22953}, author = {Waghmare, P. B. and Pathak, P. and Deshmukh, S. A. and Idage, Susheela B. and Idage, Bhaskar B.} } @article { ISI:000238709700070, title = {Synthesis and characterization of siloxane copolyesters containing phenylindane linkages}, journal = {Journal of Applied Polymer Science}, volume = {101}, number = {4}, year = {2006}, month = {AUG}, pages = {2668-2674}, publisher = {JOHN WILEY \& SONS INC}, type = {Article}, address = {111 RIVER ST, HOBOKEN, NJ 07030 USA}, abstract = {

A novel series of siloxane copolyesters containing 1,1,3-trimethyl-3-(p-hydroxyphenyl)-5-indanol (phenylindane bisphenol), diphenyl terephthalate (DPT), diphenyl isophthalate (DPI), and eugenol end-capped siloxanes in varying ratios were prepared at a temperature range of 200-290 degrees C under reduced pressure using dibutyl tin dilaurate catalyst by melt polycondensation. The siloxane-containing copolyesters were characterized by infrared and H-1 NMR spectroscopy, elemental analysis, solution viscosity, thermogravimetric analysis, differential scanning calorimetry, and X-ray diffraction. The effect of incorporation of siloxane moiety was studied on the properties of phenyl indane/DPT/DPI coplyester. The glass transition temperatures of copolyesters were decreased from 235 to 124 degrees C by incorporation of 10\% eugenol end-capped siloxane without affecting the thermal properties. All copolyesters were found to be soluble in commonly used organic solvents and had film forming properties. (c) 2006 Wiley Periodicals, Inc.

}, keywords = {eugenol end capped siloxane, melt polymerization, phenylindane bisphenol, siloxane copolyesters}, issn = {0021-8995}, doi = {10.1002/app.23910}, author = {Waghmare, P. B. and Deshmukh, S. A. and Idage, Susheela B. and Idage, Bhaskar B.} } @article { ISI:000367915800019, title = {Synthesis and characterization of well-defined random and block copolymers of epsilon-caprolactone with l-lactide as an additive for toughening polylactide: Influence of the molecular architecture}, journal = {Journal of Applied Polymer Science}, volume = {133}, number = {14}, year = {2016}, month = {APR}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

Well-defined multiarmed star random and block copolymers of epsilon-caprolactone with l-lactide with controlled molecular weights, low polydispersities, and precise numbers of arms were synthesized by the ring-opening polymerization of respective cyclic ester monomers. The polymers were characterized by H-1-NMR and C-13-NMR to determine their chemical composition, molecular structure, degree of randomness, and proof of block copolymer formation. Gel permeation chromatography was used to establish the degree of branching. Star-branched random copolymers exhibited lower glass-transition temperatures (T-g{\textquoteright}s) compared to a linear random copolymer. When the star random copolymers were melt-blended with poly(l-lactic acid) (PLA), we observed that the elongation of the blend increased with the number of arms of the copolymer. Six-armed block copolymers, which exhibited higher T-g{\textquoteright}s, caused the maximum improvement in elongation. In all cases, improvements in the elongation were achieved with no loss of stiffness in the PLA blends. (c) 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016, 133, 43267.

}, keywords = {biodegradable, copolymers, differential scanning calorimetry, mechanical properties, ring-opening polymerization}, issn = {0021-8995}, doi = {10.1002/app.43267}, author = {Deokar, Megha D. and Idage, Susheela B. and Idage, Bhaskar B. and Sivaram, Swaminathan} }