@article { ISI:000291525400022, title = {Fabrication, thermal and electrical properties of polyphenylene sulphide/copper composites}, journal = {Materials Chemistry and Physics}, volume = {128}, number = {1-2}, year = {2011}, month = {JUL}, pages = {114-120}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

The thermal and electrical properties of high performance poly(phenylene sulphide) (PPS) composites reinforced up to 31 vol\% Cu particles were investigated to be used as materials for electronic applications. The thermal stability and char yield of the composites increased significantly. Both pre- and post- glass transition coefficient of thermal expansion (CTE) of composites decreased significantly. The microhardness was increased by more than 50\% compared to pure PPS matrix. Microhardness and CTE of composites correlated well with the rule of mixtures. A percolation threshold about 6 vol\% Cu was obtained. The electrical conductivity was increased by about eight orders of magnitude for 18 vol\% composite. Dielectric constant and dissipation factor of composites at 1 MHz was increased by about 6-fold and 70-fold compared to matrix, respectively. They decreased gradually with increasing frequency up to 1 MHz and thereafter, there was insignificant change. The scanning electron microscope showed almost uniform distribution of Cu particles in the matrix. Owing to better dimensional stability and good electrical properties, these composites are very promising for electronic applications. (C) 2011 Elsevier B.V. All rights reserved.

}, keywords = {Dielectric property, Electrical conductivity, hardness, Thermal expansion}, issn = {0254-0584}, doi = {10.1016/j.matchemphys.2011.02.065}, author = {Goyal, R. K. and Kambale, K. R. and Nene, S. S. and Selukar, B. S. and Arbuj, Sudhir S. and Mulik, Uttam P.} } @article { ISI:000321434500006, title = {Palladium chloride catalyzed photochemical heck reaction}, journal = {Canadian Journal of Chemistry-Revue Canadienne De Chimie}, volume = {91}, number = {5}, year = {2013}, month = {MAY}, pages = {348-351}, publisher = {CANADIAN SCIENCE PUBLISHING, NRC RESEARCH PRESS}, address = {65 AURIGA DR, SUITE 203, OTTAWA, ON K2E 7W6, CANADA}, abstract = {

PdCl2 catalyzed carbon-carbon bond formation (Heck reaction) between substituted aryl halides and olefins was carried out without a ligand, under irradiation with UV-visible light. The results demonstrated that UV-visible light accelerated the rate of the reaction, leading to an excellent yield of corresponding products. The recovered palladium nanoparticles could be thermally recycled several times. PdCl2 gave excellent conversion up to the fifth addition of substrate.

}, keywords = {C-C coupling, Heck reaction, iodobenzene, photochemical reaction}, issn = {0008-4042}, doi = {10.1139/cjc-2012-0377}, author = {Waghmode, Suresh B. and Arbuj, Sudhir S. and Wani, Bina N. and Gopinath, Chinnakonda S.} } @article { ISI:000349434300057, title = {Hierarchical CdS nanostructure by Lawesson{\textquoteright}s reagent and its enhanced photocatalytic hydrogen production}, journal = {RSC Advances}, volume = {5}, number = {18}, year = {2015}, month = {JAN}, pages = {13715-13721}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Lawesson{\textquoteright}s reagent (LR) has been effectively exploited for the synthesis of hierarchical architectures of cadmium sulphide (CdS) nanostructures for the first time. The X-ray diffractograms of the as synthesised CdS nanostructures confirm the formation of hexagonal CdS. The broadness of the XRD peaks clearly indicates the nanocrystalline nature of CdS with average crystallite size of 4 nm. A FESEM study revealed the formation of hierarchical nanostructures, whereas a TEM study showed that the hierarchical arrangement is composed of nanosized CdS particles. A band-gap i.e. 2.4 eV was derived from diffuse reflectance spectroscopy. The photoluminescence spectrum showed an emission peak at 535 and 568 nm which can be attributed to band-edge emission and surface emissions or possible metal vacancies, respectively. Considering the band-gap within the visible region, the photocatalytic hydrogen evolution performance of these CdS nanostructures was performed under visible light irradiation from hydrogen sulphide and water, respectively. Utmost hydrogen evolution i.e. 14 136 mu mol h(-1) g(-1) and 2065 mu mol h(-1) g(-1) was observed over a naked CdS nanostructure via H2S and water decomposition, respectively. The amount of hydrogen obtained by H2S splitting is much higher as compared to earlier reports.

}, issn = {2046-2069}, doi = {10.1039/c4ra15138k}, author = {Pandit, Vikram U. and Arbuj, Sudhir S. and Hawaldar, Ranjit R. and Kshirsagar, Pradnya V. and Deshmukh, Amarsinh J. and Ambekar, Jalindar D. and Mulik, Uttam P. and Gosavi, Suresh W. and Kale, Bharat B.} } @article { ISI:000355656000012, title = {Tuning magnetic behavior of nanoscale cobalt sulfide and its nanocomposite with an engineering thermoplastic}, journal = {Journal of Electronic Materials}, volume = {44}, number = {7}, year = {2015}, month = {JUL}, pages = {2308-2311}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

Nanocomposites containing magnetic nanoparticles embedded in a polymer matrix with good thermal stability (up to 200A degrees C) are technologically important. We report an environmentally benign solid-solid approach for synthesis of cobalt sulfide and its nanocomposite using a thermally stable matrix of polyphenylene sulfide. Physicochemical characterizations reveal the formation of nanoclusters of the hexagonal phase CoS. Even though bulk CoS is nonmagnetic, magnetization studies exhibit anomalous magnetic behavior for phase-pure nanoscale CoS and its nanocomposites.

}, keywords = {Nanocomposite, polyphenylene sulfide, Solid-solid reaction, superparamagnetic}, issn = {0361-5235}, doi = {10.1007/s11664-015-3753-1}, author = {Rumale, Narendra and Arbuj, Sudhir S. and Umarji, Govind and Shinde, Manish and Mulik, Uttam P. and Joy, Pattayil Alias and Amalnerkar, Dinesh P.} }