@article {49110,
	title = {Concentration-dependent SILAR synthesized Di-bismuth copper oxide nano-materials electrode in asymmetric supercapacitor},
	journal = {Journal of Materials Science-Materials in Electronics},
	volume = {35},
	year = {2024},
	month = {JAN},
	pages = {129},
	type = {Article},
	abstract = {<p>
	In this study, we present a novel approach to prepare bismuth oxide deposited on copper substrate (Bi2CuO4) electrodes using a binder-free successive ionic layer adsorption and reaction (SILAR) technique, demonstrating their potential for energy storage applications. The resulting Bi2CuO4 electrode exhibits a tetragonal crystal structure with a polycrystalline nature, as confirmed by X-ray diffraction (XRD). Field emission scanning electron microscopy (FE-SEM) reveals a distinctive sphere-like structure with hydrophilic characteristics, as determined from contact angle measurements. X-ray photoelectron spectroscopy (XPS) further validates the composition of the sample. The electrochemical performance of Bi2CuO4 is remarkable, with a specific capacitance (SC) of 1795.9 F/g at 16 mA/cm(2). When used as an anode in an asymmetric solid-state device (ASSD) alongside activated carbon (AC) as the cathode, the Bi2CuO4 electrode attains a maximum energy density (SE) of 169.5 Wh/kg at 16 mA/cm(2) and a peak power density (SP) of 15.9 kW/kg at 24 mA/cm(2). In a 1 M KOH-polyvinyl alcohol (PVA) polymer solution, the Bi2CuO4//AC pencil-type cell achieves a superior SC of 94.5 F/g at 5 mV/s, retaining approximately 92\% of its initial performance even after 5000 charge-discharge cycles. The resulting SE and SP are 43.1 Wh/kg and 5.2 kW/kg at 10 mA/cm(2), respectively. This research presents an efficient and straightforward synthesis method for producing high-performance pencil-type supercapacitors at a laboratory scale. Furthermore, we demonstrate the potential of a homemade pencil-type supercapacitor device (Bi2CuO4//AC) to power a light-emitting diode (LED), highlighting its practical utility in various energy storage applications.</p>
},
	issn = {0957-4522},
	doi = {10.1007/s10854-023-11818-4},
	author = {Bobade, R. G. and Dabke, N. B. and Shaikh, Shoyebmohamad F. and Al-Enizi, Abdullah M. and Pandit, Bidhan and Lokhande, B. J. and Ambare, R. C.}
}
@article {49115,
	title = {Facile chemical synthesis of BaO:MgO nanorods for designing distinctive solid-state asymmetric supercapacitor device with activated carbon},
	journal = {Journal of Energy Storage},
	volume = {84},
	year = {2024},
	month = {APR},
	pages = {110776},
	type = {Article},
	abstract = {<p>
	The successive ionic layer adsorption and reaction (SILAR) technique was adapted to produce the interconnected complex network of BaO:MgO nanorods on a flexible stainless-steel (SS) substrate surface. The phase and surface morphology of the BaO:MgO electrode were examined from the X-ray diffraction and scanning electron microscopy measurements, respectively, which endowed electrochemical specific capacitance (SC) of 528.77 F/g at a 2 mV/s scan rate with great rate capability and cycling performance of 94.33 \% over 5000 cyclic voltammetry cycles. Fabricated BaO:MgO//AC asymmetric solid-state supercapacitor device, using polyvinyl alcohol and potassium hydroxide gel as an electrolyte, demonstrated distinctive energy storage performance, i.e., a specific capacitance (SC) of 259.07 F/g with an energy density of 57.27 Wh/kg and a power density of 2.34 kW/kg at a current density of 4 mA/cm(2). The results demonstrated the facile method for synthesizing a spherical nanorod network of BaO:MgO and made them promising electrode materials for energy storage applications. The use of a solid-state supercapacitor device to illuminate an LED demonstrated the commercial feasibility of both the materials utilized and the design type.</p>
},
	keywords = {activated carbon, ASSD device, BaO:MgO, SILAR, supercapacitor},
	issn = {2352-152X},
	doi = {10.1016/j.est.2024.110776},
	author = {Bobade, Rushikesh G. and Dabke, Niteen B. and Shaikh, Shoyebmohamad F. and Lokhande, Balkrushna J. and Mane, Rajaram S. and Ambare, Revanappa C.}
}
@article {49264,
	title = {Influence of deposition potential on electrodeposited bismuth-copper oxide electrodes for asymmetric supercapacitor},
	journal = {BATTERIES \& SUPERCAPS},
	volume = {7},
	year = {2024},
	month = {JUN},
	type = {Journal Article},
	keywords = {Bi2CuO4, Deposition Potential, Electrodeposition, supercapacitor, thin film},
	doi = {10.1002/batt.202400163},
	author = {Bobade, Rushikesh G. and Dabke, Niteen B. and Shaikh, Shoyebmohamad F. and Al-Enizi, Abdullah M. and Pandit, Bidhan and Lokhande, Balkrishna J. and Ambare, Revanappa C.}
}
