@article { ISI:000255001300003, title = {Physicomechanical and magnetic properties of neoprene based rubber ferrite composites}, journal = {Polymer-Plastics Technology and Engineering}, volume = {47}, number = {2}, year = {2008}, month = {JAN}, pages = {137-146}, publisher = {TAYLOR \& FRANCIS INC}, address = {325 CHESTNUT ST, SUITE 800, PHILADELPHIA, PA 19106 USA}, abstract = {

Fine (approximately 18nm) particles of nickel ferrite were synthesized by the sol-gel technique, and their structural properties were evaluated by X-ray diffraction. Neoprene-based rubber ferrite composites were prepared by incorporating these nickel ferrite powders in the rubber matrix according to a specific recipe. The cure characteristics were analyzed, and the samples were molded into particular shapes whose properties were determined according to ASTM standards. Magnetization studies were carried out using a Vibrating Sample Magnetometer. This study indicates that neoprene rubber-based flexible magnets with desired magnetic properties and appropriate mechanical properties can be prepared by incorporating an adequate amount of nanoscale nickel ferrite particles within the rubber matrix.

}, keywords = {Ferrite, ferrite composites, flexible magnets, neoprene rubber, rubber, Sol-gel method}, issn = {0360-2559}, doi = {10.1080/03602550701815946}, author = {Prema, K. H. and Kurian, Philip and Joy, Pattayil Alias and Anantharaman, Maliemadom R.} } @article { ISI:000324098200003, title = {Porous Co3O4 nanorods as superior electrode material for supercapacitors and rechargeable Li-ion batteries}, journal = {Journal of Applied Electrochemistry}, volume = {43}, number = {10}, year = {2013}, month = {OCT}, pages = {995-1003}, publisher = {SPRINGER}, address = {VAN GODEWIJCKSTRAAT 30, 3311 GZ DORDRECHT, NETHERLANDS}, abstract = {

Porous aggregated nanorods of Co3O4 with a surface area of similar to 100 m(2) g(-1) synthesized without using any templates or surfactants give very high specific capacitance of similar to 780 F g(-1) when used as electrode in a faradaic supercapacitor, with a cycle life of more than 1,000 cycles. Further, in Li-ion batteries when used as an anode, the Co3O4 nanorods achieved a capacity of 1155 mA h g(-1) in the first cycle and upon further cycling it is stabilized at 820 mA h g(-1) for more than 25 cycles. Detailed characterization indicated the stability of the material and the improved performance is attributed to the shorter Li-insertion/desertion pathways offered by the highly porous nanostructures. The environmentally benign and easily scalable method of synthesis of the porous Co3O4 nanorods coupled with the superior electrode characteristics in supercapacitors and Li-ion batteries provide efficient energy storage capabilities with promising applications.

}, keywords = {Cobalt oxide, Electrode materials, Li-ion battery, Porous nanostructures, supercapacitor}, issn = {0021-891X}, doi = {10.1007/s10800-013-0593-7}, author = {Vijayanand, S. and Kannan, Ramaiyan and Potdar, H. S. and Pillai, V. K. and Joy, Pattayil Alias} } @article { ISI:000361402600005, title = {Preparation and characterization of flexible ferromagnetic nanocomposites for microwave applications}, journal = {Materials Science and Engineering B-Advanced Functional Solid-State Materials}, volume = {200}, year = {2015}, month = {OCT}, pages = {40-49}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Magnetic Fe3O4 nanoparticles (similar to 20 nm) were synthesized using the chemical co-precipitation method with a view of developing flexible and easily processable ferromagnetic materials with high mouldability to be used as microwave absorbers. The nanoparticles prepared were incorporated into natural rubber through latex stage processing. This novel processing method gives better dispersion of particles in the rubber matrix. The composites were characterized using XRD, SEM, vibrating sample magnetometer, dynamic mechanical analyzer, cavity perturbation, thermogravimetry (TGA), and Fourier transform infrared photoacoustic spectroscopy (FTIR-PAS). A notable improvement in the mechanical properties of composites was observed upon adding Fe3O4 particles. Magnetic and microwave characteristics of the composites indicate the formation of a flexible ferromagnetic material with good microwave absorption characteristics. (C) 2015 Published by Elsevier B.V.

}, keywords = {Fe3O4, Ferromagnetic, FTIR-PAS, Microwave absorption, Natural rubber, SEM, XRD}, issn = {0921-5107}, doi = {10.1016/j.mseb.2015.04.014}, author = {Thomas, Teena and Kanoth, Bipinbal P. and Nijas, C. M. and Joy, Pattayil Alias and Joseph, Joseph M. and Kuthirummal, Narayanan and Thachil, Eby T.} }