@article { ISI:000228797100055, title = {Deposition and characterization of silver nano-films by a novel solid liquid interface reaction technique (SLIRT)}, journal = {Materials Letters}, volume = {59}, number = {14-15}, year = {2005}, month = {JUN}, pages = {1958-1961}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Solid-liquid interface reaction technique (SLIRT) is used to deposit silver film on glass substrate. The solid film of silver nitrate is formed by modified spin coating method. This film is subsequently processed by dipping it in a reducing solution so as to initiate a reaction at the interface and ultimately transform it to totally silver film. In situ transformation of silver nitrate to silver is studied with respect to time spectrophotometrically. The characterization of silver film is done by various physicochemical techniques namely XRD, XPS, ED, TEM and UV visible spectroscopy. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {Electron microscopy, Nano-Particles, solid-liquid interface reaction, thin film}, issn = {0167-577X}, doi = {10.1016/j.matlet.2005.02.035}, author = {Godbole, P. D. and Mitra, A. and Pasricha, R. and Mandale, A. B. and Patil, K. R.} } @article { ISI:000233067000013, title = {Preparation and characterization of a copper based Indian traditional drug: tamra bhasma}, journal = {Journal of Pharmaceutical and Biomedical Analysis}, volume = {39}, number = {5}, year = {2005}, month = {OCT}, pages = {951-955}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

The copper based Indian traditional drug {\textquoteleft}tamra bhasma{\textquoteright} is administered for various ailments since long. Its synthesis involves treating metallic copper with plant juices and then repeated calcination in presence of air so that the metallic state is transformed into the corresponding oxide form traditionally known as {\textquoteleft}bhasma{\textquoteright}. In this work, we present a systematic characterization of this traditional drug using various techniques like X-ray diffraction (XRD), scanning electron microscopy (SEM)-energy dispersive X-ray analysis (EDX), X-ray photoelectron spectroscopy (XPS), infrared spectroscopy (IR), thermogravimetry (TG) and surface area measurement. The results obtained were found to match very well with those of a standard copper oxide confirming the composition of the drug sample. In addition, some specific findings were also made which could help in interpreting the therapeutic properties of the traditional drug {\textquoteleft}tamra bhasma{\textquoteright}. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {copper oxide, crystallite size, tamra bhasma, traditional medicine, XPS of copper oxide, XRD}, issn = {0731-7085}, doi = {10.1016/j.jpba.2005.06.015}, author = {Wadekar, M. P. and Rode, C. V. and Bendale, Y. N. and Patil, K. R. and Prabhune, Asmita} } @article { ISI:000228436200035, title = {Self-assembly of nanostructured PbS for solar photovoltaic applications}, journal = {Materials Chemistry and Physics}, volume = {91}, number = {2-3}, year = {2005}, month = {JUN}, pages = {447-453}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

In the present communication, the self-assembly of nanocrystalline PbS at the liquid-liquid interface is reported. The PbS nanocrystals were, subsequently, transformed in the form of thin films by dip coating. The resultant Q-PbS films were characterized by SEM-EDAX, TEM-SAED, XRD, XPS and UV-vis Spectroscopy. Pyramidal features at the nanometer scale, preferred orientation along (2 2 0) and (4 0 0) planes of cubic structure and a sharp excitonic peak at 656 run are the salient aspects of this work. The band-gap of the order of 1.8 eV (associated with the excitonic feature) is ideally suited for solar photovoltaic applications. (c) 2004 Elsevier B.V. All rights reserved.

}, keywords = {Liquid-liquid interface, nanopyramid, Nanostructures, PbS}, issn = {0254-0584}, doi = {10.1016/j.matchemphys.2004.12.007}, author = {Hawaldar, Ranjit R. and Kanade, K. G. and Patil, K. R. and Sathaye, S. D. and Mulik, Uttam P. and Amalnerkar, Dinesh P.} } @article { ISI:000230375200016, title = {Synthesis of fine PbE (E = S, Se) powder from direct in situ reduction of sulphur or selenium}, journal = {Materials Chemistry and Physics}, volume = {93}, number = {1}, year = {2005}, month = {SEP}, pages = {91-94}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Lead sulphide and lead selenide have been prepared for the first time, by in situ reduction of elemental S or Se by using aqueous DMF or aqueous SFS as reducing agents and their reaction with lead acetate. The grayish-black powder has been characterized by powder XRD measurement, XPS and SEM/EDAX analysis. Powder X-ray diffraction pattern revealed that cubic PbE (E = S, Se) is formed with a little impurities of lead in case of PbSe. Slightly broader peaks in XRD measurement suggest small particles diameter in the powder. The particle size by using Scheffer{\textquoteright}s formula is found to be about 100 nm. Peaks due to free lead particles are observed in XPS and EDS (in case of PbSe) analysis and SEM analysis indicates agglomerated particles. (c) 2005 Elsevier B.V All rights reserved.

}, keywords = {Chemical synthesis, electronic materials, reduction, Semiconductor}, issn = {0254-0584}, doi = {10.1016/j.matchemphys.2005.02.025}, author = {Khanna, P. K. and Subbarao, VVVS and Wagh, M. and Jadhav, P. and Patil, K. R.} } @article { ISI:000228510500016, title = {X-ray photoelectron spectroscopic investigations of Cu2O nanoparticles}, journal = {Materials Research Bulletin }, volume = {40}, number = {4}, year = {2005}, month = {APR}, pages = {694-700}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Cuprous oxide nanoparticles of five different sizes were obtained by electrochemical as well as chemical routes. Various capping agents were used to passivate the nanoparticles. X-ray diffraction studies show formation of single phased, cubic Cu2O nanoparticles. X-ray photoelectron spectroscopic studies indicate formation of CuO phase on the surface of Cu2O nanoparticles for uncapped as well as for those, capped by tetraoctylammonium bromide. On the other hand polyacrylamide and polyvinyl pyrrolidone capped samples did not show presence of CuO. X-ray photoelectron spectroscopy also indicates formation of a Cu2+ complex with the capping material on the surface of Cu2O nanoparticles. The results were discussed in terms of capability of passivation of various additives. (c) 2005 Elsevier Ltd. All rights reserved.

}, keywords = {Nanostructures, Oxides, photoelectron spectroscopy, Surfaces}, issn = {0025-5408}, doi = {10.1016/j.materresbull.2004.12.008}, author = {Nikesh, V. V. and Mandale, A. B. and Patil, K. R. and Mahamuni, Shailaja} } @article { ISI:000240521800008, title = {Adsorption of methanol on Si(100)/SiO(2)and mesoporous SBA-15}, journal = {Colloids and Surfaces A-Physicochemical and Engineering Aspects}, volume = {287}, number = {1-3}, year = {2006}, month = {SEP}, pages = {51-58}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Adsorption of methanol on SiO(100)/SiO2 substrate and mesoporous SBA-15 has been studied by using Fourier transform infrared (FTIR) and X-ray photoelectron spectroscopy (XPS). Contact angle technique is employed to study the adsorption kinetics of methanol on SiO(100)/SiO2 and thermal stability of adlayer. Thermogravimetric (TGA) technique is used to understand the thermal behavior of methanol layer on SBA-15. Adsorption kinetics fit fairly well with Langmuir isotherms giving adsorption rate constant, k(a) = 0.0021 W s(-1). FTIR results show formation of methoxy silicon (SiOCHA silicon polyhydride (SiH2), carboxylate, molecular water and hydroxyl groups on Si(100)/SiO2 surface and only methoxy silicon on SBA-15. XPS results confirm methanol adsorption and support FTIR results. The methanol adlayers are found to be thermally stable up to a temperature of similar to 262 degrees C on both Si(100)/SiO2 and SBA-15 and decompose between 262 and 450 degrees C. (c) 2006 Elsevier B.V. All rights reserved.

}, keywords = {Adsorption, desorption, kinetics, Methanol, SBA-15, Si(100)/SiO2, thermal stability}, issn = {0927-7757}, doi = {10.1016/j.colsurfa.2006.03.021}, author = {Mirji, S. A. and Halligudi, Shivaraj B. and Mathew, Nevin T. and Ravi, V. and Jacob, Nalini E. and Patil, K. R.} } @article { ISI:000237835100010, title = {Adsorption of octadecyltrichlorosilane on mesoporous SBA-15}, journal = {Applied Surface Science}, volume = {252}, number = {12}, year = {2006}, month = {APR}, pages = {4097-4103}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Adsorption of octadecyltrichlorosilane (OTS) on mesoporous SBA-15 has been studied by using Brunauer-Emmett-Teller (BET) surface area analysis, scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDAX), Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS) and thermo-gravimetric analysis (TGA) techniques. BET surface area analysis shows decrease of surface area from 930 to 416 m(2)/g after OTS adsorption. SEM pictures show close attachment of SBA-15 particles. EDAX measurements show increase of carbon weight percentage and decrease of oxygen and silicon weight percentage. XPS results closely support EDAX analysis. FTIR spectra shows presence of methyl (-CH3) and methylene (-CH2) bands and oriented OTS monolayer on SBA-15. Thermo-gravimetric analysis shows that the OTS adsorbed on SBA-15 are stable up to a temperature of 230 degrees C and that the OTS monolayers decompose between 230 and 400 degrees C. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {Adsorption, OTS, SBA-15, Self-assembly, thermal stability}, issn = {0169-4332}, doi = {10.1016/j.apsusc.2005.06.009}, author = {Mirji, S. A. and Halligudi, Shivaraj B. and Sawant, Dhanashri P. and Jacob, Nalini E. and Patil, K. R. and Gaikwad, A. B. and Pradhan, S. D.} } @article { ISI:000237525300035, title = {Densities and heat capacities of the ammonia plus water plus NaOH and ammonia plus water plus KOH solutions}, journal = {Journal of Chemical and Engineering Data}, volume = {51}, number = {3}, year = {2006}, month = {MAY}, pages = {1020-1025}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Ammonia + water + sodium hydroxide and ammonia + water + potassium hydroxide mixtures were chosen as potential candidates for absorption chillers driven by low-temperature heat sources. Heat capacity and density were studied between (293.15 and 353.15) K at a constant pressure of 1.8 MPa for these solutions using a heat flux Calvet-type calorimeter and a vibrating-tube densimeter, respectively. Measured data were well-correlated with temperature and composition using simple polynomial equations. The relative deviations between the experimental and calculated values in the density and heat capacity measurements were 0.20 \% and 0.49 \% for NH3 + H2O + NaOH solutions and 0.10 \% and 0.36 \% for NH3 + H2O + KOH solutions, respectively. Also, two density prediction methods were checked using the experimental data. Previously, it was necessary to measure the density of ammonia and hydroxide aqueous solutions in similar conditions. The results showed that both methods are suitable for predicting the density of these solutions.

}, issn = {0021-9568}, doi = {10.1021/je050512z}, author = {Salavera, D. and Libotean, S. and Patil, K. R. and Esteve, X. and Coronas, Alberto} } @article { ISI:000239542900032, title = {Direct synthesis of nanocrystalline silver from the reaction between silver carboxylates and n-trioctylphosphine}, journal = {Journal of Nanoscience and Nanotechnology}, volume = {6}, number = {7}, year = {2006}, month = {JUL}, pages = {2095-2102}, publisher = {AMER SCIENTIFIC PUBLISHERS}, type = {Article}, address = {26650 THE OLD RD, STE 208, VALENCIA, CA 91381-0751 USA}, abstract = {

Neat n-Trioctylphosphine (TOP) has been used for the first ever time for reduction of silver nitrate and silver carboxylates (citrate, oleate, and myristate) under mild thermal reaction conditions. UV-visible absorption measurements of re-dispersible silver particles that were obtained by reduction of silver myristrate (product-IV) and silver nitrate (product-I) showed surface plasmon resonance absorption peak at 400 nm. The powder XRD pattern of fcc zero-valent silver resulted in diameters in the range of about 25-30 nm. TEM analysis showed particle diameter similar to that was observed by the XRD. FTIR spectroscopy revealed that the organics from the carboxylate group are retained by the nano-particles in case of product-IV however, presence of TOP is observed in product-I. It is found that when silver nitrate is reduced by TOP, spherical silver nano-particles with poor redispersity are formed but extended heating results in formation of long silver rods of micrometer size however, the re-dispersible nano-particles are easily formed when silver carboxylates are reduced by TOP.

}, keywords = {Chemical synthesis, Nanocrystalline, noble metal, XRD}, issn = {1533-4880}, doi = {10.1166/jnn.2006.339}, author = {Charan, Shobhit and Singh, Narendra and Khanna, P. K. and Patil, K. R.} } @article { ISI:000238491100062, title = {Effect of calcination cycles on the preparation of tin oxide based traditional drug: studies on its formation and characterization}, journal = {Journal of Pharmaceutical and Biomedical Analysis}, volume = {41}, number = {4}, year = {2006}, month = {JUN}, pages = {1473-1478}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

The preparation method of metal based Indian traditional drugs involves conversion of a pure metal into its oxide by repeated high temperature calcination cycles. In this work, the effect of number of calcination cycles followed in the preparation of tin oxide based Ayurvedic drug, {\textquoteleft}vanga bhasma{\textquoteright} was studied by a systematic characterization of the drug samples after various calcination stages. It was found that tin was in the form of Sn4+ state and that the formation of SnO2 proceeded step-wise through Sn(OH)(4). (c) 2006 Elsevier B.V. All rights reserved.

}, keywords = {calcination cycles, Oxidation, oxidation state of tin, Particle size, tin oxide, vanga bhasma}, issn = {0731-7085}, doi = {10.1016/j.jpba.2006.03.032}, author = {Wadekar, M. P. and Rode, C. V. and Bendale, Y. N. and Patil, K. R. and Gaikwad, A. B. and Prabhune, Asmita} } @article { ISI:000236648800046, title = {Formation of poly(o-anisidine) coatings on copper from aqueous salicylate solution}, journal = {Surface \& Coatings Technology}, volume = {200}, number = {18-19}, year = {2006}, month = {MAY}, pages = {5557-5565}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Poly(o-anisidine) coatings have been electrosynthesized by using cyclic voltammetry on copper from an aqueous salicylate medium. Cyclic voltammetry, UV-visible absorption spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscopy and X-ray photoelectron spectroscopy were used to characterize these coatings, which indicates that the aqueous salicylate solution is a suitable medium for the electrochemical polymerization of o-anisidine on copper substrate. Cyclic voltammetry accompanied by the X-ray photoelectron spectroscopy was used to characterize the surface modifications induced by polarizing the copper substrate in the aqueous salicylate solution (without monomer). It was shown that the polarization of the copper in the aqueous salicylate medium results into the passivation of its surface via the formation of Cu(2)O and/or copper salicylate complex. It was found that the electrochemical polymerization of o-anisidine takes place after the passivation of the copper substrate via fort-nation of Cu(2)O and/or copper salicylate complex and results into the formation of shiny, uniform and strongly adherent poly(o-anisidine). The optical absorption spectroscopy reveals the formation of emraldine salt form of poly(o-anisidine). This study offers an electrochemical polymerization recipe to synthesize strongly adherent poly(o-anisidine) coating on copper from aqueous media for possible use in corrosion protection application. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {conducting polymers, Copper, corrosion protective coatings, cyclic voltammetry, poly(o-anisidine) coatings}, issn = {0257-8972}, doi = {10.1016/j.surfcoat.2005.07.071}, author = {Chaudhari, Sudeshna and Mandale, A. B. and Patil, K. R. and Sainkar, S. R. and Patil, P. P.} } @article { ISI:000236590300058, title = {Poly(o-toluidine) coatings on copper: electrochemical synthesis from aqueous media}, journal = {Surface \& Coating Technology}, volume = {200}, number = {16-17}, year = {2006}, month = {APR}, pages = {5094-5101}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Poly(o-toluidine) (POT) coatings were synthesized on copper (Cu) by electrochemical polymerization of o-toluidine using aqueous sodium oxalate solution as supporting electrolyte. The resulting coatings were uniform, compact and strongly adherent to the Cu substrate. These coatings were characterized by using cyclic voltammetry, UV-visible absorption spectroscopy, Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD) measurements and X-ray photoelectron spectroscopy (XPS). The results of these studies reveal that the sodium oxalate is suitable supporting electrolyte for the electrochemical polymerization of o-toluidine on Cu substrate. It is found that the electrochemical polymerization of o-toluidine takes place after the passivation of the Cu substrate via formation of copper oxalate (CuC2O4, H2O) layer, which is confirmed by XRD and XPS. The optical absorption spectroscopy study reveals the exclusive formation of the pernigraniline base (PB) form of POT. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {Conducting polymer coatings, Copper, Corrosion resistant coatings, cyclic voltammetry, poly(o-toluidine) coatings}, issn = {0257-8972}, doi = {10.1016/j.surfcoat.2005.05.026}, author = {Shinde, V. and Mandale, A. B. and Patil, K. R. and Gaikwad, A. B. and Patil, P. P.} } @article { ISI:000235256200004, title = {Preparation of gamma-Fe2O3 nanoparticles using DC thermal arc-plasma route, their characterization and magnetic properties}, journal = {Scripta Materialia}, volume = {54}, number = {7}, year = {2006}, month = {APR}, pages = {1235-1240}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

gamma-Fe2O3 particles were prepared, for the first time, using a direct current thermal arc-plasma route. The powder was characterized using X-ray diffraction, Mossbauer spectroscopy, X-ray photoelectron spectroscopy, chemical analysis, vibrating sample magnetometry C and transmission electron microscopy. The high purity, stoichiometry and spherical morphology of the gamma-Fe2O3 particles (saturation magnetization = 79 emu g(-1) and coercivity = 348 Oe) were confirmed. (c) 2006 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

}, keywords = {chemical analysis, DC thermal arc-plasma route, maghemite, Mossbauer spectroscopy, XPS}, issn = {1359-6462}, doi = {10.1016/j.scriptamat.2005.12.029}, author = {Banerjee, Indrani and Khollam, Y. B. and Balasubramanian, C. and Pasricha, R. and Bakare, P. P. and Patil, K. R. and Das, A. K. and Bhoraskar, S. V.} } @article { ISI:000236922600002, title = {Room temperature synthesis of mesoporous aggregates of anatase TiO2 nanoparticles}, journal = {Materials Chemistry and Physics}, volume = {97}, number = {2-3}, year = {2006}, month = {JUN}, pages = {207-212}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

The controlled hydrolysis reaction of titanium tetrabutoxide in presence of acetic acid in isopropanol, i.e. in non-aqueous media was adopted in the present work for the synthesis of nanocrystalline titania followed by aging at ambient conditions for longer duration. The powder XRD shows that the as-dried precursor (without any aging) is non-crystalline in nature. However, room temperature aging for longer duration \> 120 days not only helped to develop crystallinity in TiO2 nanoparticles but also led to the formation of their self-assembly towards mesoporous aggregates creating sponge like TiO2 nano-structure having high surface area similar to 250m (2) g(-1)and narrow pore size distribution of 4-5 nm. TEM observations revealed the generation of spherical TiO2 nanoparticles (4-5 nm) assembled to form stable spongy scaffold having porous network structure with pore size 5-6 nm. Also, presence of a pronounced hysteresis loop in BET isotherm is indicative of a 3D-intersection network of the pores of size 4-5 nm. Further heat-treatment to the aged precursor at 400 degrees C/2 h in air modify pore network structure due to sintering of TiO2 particles as is observed in TEM studies and lowering thereby the surface area to 125 m(2) g(-1) (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {Microstructure, porous materials, sol-gel processing, titania}, issn = {0254-0584}, doi = {10.1016/j.matchemphys.2005.02.014}, author = {Deshpande, S. B. and Potdar, H. S. and Khollam, Y. B. and Patil, K. R. and Pasricha, R. and Jacob, Nalini E.} } @article { ISI:000238050700006, title = {Synthesis of beta-Ag2Se from organo-selenium precursor and silver nitrate in DMF via simultaneous reduction of selenium and silver salt}, journal = {Materials Letters}, volume = {60}, number = {17-18}, year = {2006}, month = {AUG}, pages = {2080-2085}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Reaction of selenium powder and silver nitrate in aqueous N,N{\textquoteright}-dimethylformamide (aq. DMF) leads to formation of silver selenide. Similar reaction with cycloalkeno-1,2,3-selenadiazole an organic compound of selenium upon thermolysis, also produces silver selenide. It is believed that DMF activates selenium and reduces silver salt via in-situ generated hydrogen ion simultaneously. Slightly broadened X-ray diffraction pattern for pure beta silver selenide (beta-Ag2Se) was observed. Scanning electron microscopy (SEM) indicated that the agglomerated particles could be in the range of about 100 to 200 nm in dimension. EDAX analysis showed non-stoichiometric elemental ratio between silver and selenium. It is found that the weight percent of Ag is slightly higher than Se. However, free amorphous selenium is also detected by XPS analysis when the product is made by use of elemental selenium. Thermal analysis (TGA) revealed a small (4\%) weight loss due to the presence of organics or the solvent from the reaction medium. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {Chemical synthesis, nano powder, noble metal chalcogenides, Semiconductor}, issn = {0167-577X}, doi = {10.1016/j.matlet.2005.12.079}, author = {Khanna, P. K. and Singh, N. and Charan, Shobhit and Patil, K. R.} } @article { ISI:000242469000012, title = {Unusual formation of nano-particles of CdO and Cd(OH)(2) from the reaction of dimethyl cadmium with DMF}, journal = {Materials Letters}, volume = {60}, number = {29-30}, year = {2006}, month = {DEC}, pages = {3492-3498}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

This paper presents generation of CdO and Cd(OH)(2) nano-particles from Dimethyl Cadmium in DMF. The CdO nano-particles were obtained instead of CdSe, even when the reaction was done in presence of 1,2,3-selenadiazole (the source of selenium) with Me2Cd in DMF (product-I). The direct reaction of Me2Cd in DMF also leads to formation of CdO (product-II). However, Cd(OH)(2) nano-particles were obtained when Me2Cd was refluxed in DMF for a few hours followed by reaction of H2S gas (product-III). The formation of Cd(OH)(2) was also established via decomposition Of Me2Cd:Et2O adduct (product-IV). Nano-particles of CdO and Cd(OH)(2) (product-I to product-IV) were characterized by X-ray powder diffraction (XRD), TEM and SEM/EDS measurements, FTIR, thermal analysis (TGA) and XPS analysis. The particle size of all the products as calculated by XRD patterns were in the range of about 20 nm. TEM images showed that the products are agglomerated clusters with the particles in the nano-meter regime. The synthesis however, is understood to be unusual as the reactions with selenium source and sulfur source should have generated the CdSe and CdS however, the end products were always found to be the product-I to product-IV (c) 2006 Elsevier B.V. All rights reserved.

}, keywords = {Chemical synthesis, Nanoparticles, Semiconductor, XRD}, issn = {0167-577X}, doi = {10.1016/j.matlet.2006.03.054}, author = {Singh, Narendra and Charan, Shobhit and Patil, K. R. and Viswanath, A. K. and Khanna, P. K.} } @article { ISI:000242511300022, title = {Adsorption of methanol on mesoporous SBA-15}, journal = {Materials Letter}, volume = {61}, number = {1}, year = {2007}, month = {JAN}, pages = {88-92}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The adsorption of methanol onmesoporous SBA-15 has been studiedbyrising Brunauer-Emmett-Teller (BET) surface area analysis, scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, X-ray photoclectrom spectroscopy (XPS) and tbennogravimettic analysis (TGA). The BET surface area analysis shows decreases of the surface area from 387 to 383 m(2)/g, pore volume from 0.88 to 0.81 cm(3)/g and pore diameter from 9.07 to 8.4 mm after methanol adsorption. The appearance of strong IR bands at 2862 and 2964cm(-1) due to methyl (-CH3) symmetric and asymmetric stretching demonstrate the presence of methanol and evidence of successful methanol adsorption. XPS results show increase of carbon and oxygen content on the surface of SBA-15. Thermogravirriettic analysis shows that the methanol adsorbed on SBA-15 is stable up to a temperature of 265 degrees C and that the methanol adlayers decompose between 265 and 588 degrees C. (c) 2006 Elsevier B.V. All rights reserved.

}, keywords = {Adsorption, Electron microscopy, Methanol, SBA-15, Surfaces, thermal stability}, issn = {0167-577X}, doi = {10.1016/j.matlet.2006.04.012}, author = {Mirji, S. A. and Halligudi, Shivaraj B. and Mathew, Nevin T. and Jacob, Nalini E. and Patil, K. R. and Gaikwad, A. B.} } @article { ISI:000250064100040, title = {Copper phthalocyanine films deposited by liquid-liquid interface recrystallization technique (LLIRCT)}, journal = {Journal of Colloid and Interface Science}, volume = {315}, number = {2}, year = {2007}, month = {NOV}, pages = {747-752}, publisher = {ACADEMIC PRESS INC ELSEVIER SCIENCE}, type = {Article}, address = {525 B ST, STE 1900, SAN DIEGO, CA 92101-4495 USA}, abstract = {

The simple recrystallization process is innovatively used to obtain the nanoparticles of copper phthalocyanine by a simple method. Liquid-liquid interface recrystallization technique (LLIRCT) has been employed successfully to produce small sized copper phthalocyanine nanoparticles with diameter between 3-5 nm. The TEM-SAED studies revealed the formation of 3-5 nm sized with beta-phase dominated mixture of alpha and beta copper phthalocyanine nanoparticles. The XRD, SEM, and the UV-vis studies were further carried out to confirm the formation of copper phthalocyanine thin films. The cyclic voltametry (CV) studies conclude that redox reaction is totally reversible one electron transfer process. The process is attributed to Cu(II)/Cu(I) redox reaction. (C) 2007 Elsevier Inc. All rights reserved.

}, keywords = {Copper phthalocyanine, cyclic voltametry, nanoparticulate films}, issn = {0021-9797}, doi = {10.1016/j.jcis.2007.07.031}, author = {Patil, K. R. and Sathaye, S. D. and Hawaldar, Ranjit R. and Sathe, B. R. and Mandale, A. B. and Mitra, A.} } @article { ISI:000250085300004, title = {One-step preparation of nanosized Ag-PdCo-powder and its alloy formation at low temperature}, journal = {Synthesis and Reactivity in Inorganic Metal-Organic and Nano-Metal Chemistry}, volume = {37}, number = {7}, year = {2007}, month = {SEP}, pages = {531-539}, publisher = {TAYLOR \& FRANCIS INC}, type = {Article}, address = {325 CHESTNUT ST, SUITE 800, PHILADELPHIA, PA 19106 USA}, abstract = {

Nano-sized silver-palladium co-powder has been synthesized from silver nitrate-palladium chloride by wet chemical method. The present experimental conditions are applied for the first time for Ag-Pd co-powders wherein sodium formaldehyde sulfoxylate (SFS) has been used as an external reducing agent to simultaneously reduce respective metal salts. SFS reduces the metal salts at room temperature thus prevents formation of bigger particles of the respective metals in co-powder. Powder X-ray diffraction measurements ( XRD) and Transmission electron microscopy ( TEM) suggest the formation of nano-sized Ag-Pd co-powder with particle diameter in the range of about 25 nm. SEM shows that the powder morphology changes with temperature. Heat treatment of 90: 10 (Ag:Pd) composition showed shift in XRD peaks indicating alloy formation of Ag/Pd at lower temperature. Thick-films generated by use of the co-powder resulted in Ag/Pd alloy at about 500 degrees C as confirmed by the XRD. Thermal analysis showed that Ag/Pd co-powders initially gain the weight due to oxidation followed by the weight loss.

}, keywords = {alloy, Chemical synthesis, nano-powder, noble metal, Transition Metal}, issn = {1553-3174}, doi = {10.1080/15533170701563707}, author = {Khanna, P. K. and Singh, N. and Kulkarni, D. and Marimuthu, R. and Charan, Shobhit and Patil, K. R. and Jain, G. H.} } @article { ISI:000244765100003, title = {Studies on gas sensing performance of pure and modified barium strontium titanate thick film resistors}, journal = {Bulletin of Materials Science}, volume = {30}, number = {1}, year = {2007}, month = {FEB}, pages = {9-17}, publisher = {INDIAN ACADEMY SCIENCES}, type = {Article}, address = {C V RAMAN AVENUE, SADASHIVANAGAR, P B \#8005, BANGALORE 560 080, INDIA}, abstract = {

Barium strontium titanate ((Ba0.87Sr0.13)TiO3-BST) ceramic powder was prepared by mechanochemical process. The thick films of different thicknesses of BST were prepared by screen-printing technique and gas-sensing performance of these films was tested for various gases. The films showed highest response and selectivity to ammonia gas. The effect of film thickness on gas response was also studied. As prepared BST thick films were surface modified by dipping them into an aqueous solution of titanium chloride (TiCl3) for different intervals of time. Surface modification shifted response to H2S gas suppressing the responses to ammonia and other gases. The surface modification, using dipping process, altered the adsorbate-adsorbent interactions, which gave the unusual sensitivity and selectivity effect. Sensitivity, selectivity, thermal stability, response and recovery time of the sensor were measured and presented.

}, keywords = {(Ba0.87Sr0.13)TiO3 thick films, ammonia gas sensor, II2S gas sensor, selectivity, sensitivity}, issn = {0250-4707}, doi = {10.1007/s12034-007-0003-z}, author = {Jain, G. H. and Patil, L. A. and Patil, P. P. and Mulik, Uttam P. and Patil, K. R.} } @article { ISI:000243695000025, title = {Synthesis and characterization of mesoporous carbon through inexpensive mesoporous silica as template}, journal = {Microporous and Mesoporous Materials}, volume = {98}, number = {1-3}, year = {2007}, month = {JAN}, pages = {189-199}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Mesoporous silica materials have been synthesized through sol-gel reaction using inexpensive sodium silicate as source of silica and low cost hydroxy carboxylic acid compounds as templates/pore forming agents. The material measured surface area of 1014 m(2)/g, pore diameter of 65 angstrom and pore volume of 1.4 cc/g when parameters like time and temperature of synthesis along with mole ratio of TA/SiO(2) were optimized. Here TA stands for tartaric acid. Carbonization of sucrose inside the pores of above silica material at 900 degrees C followed by removal of silica framework using aqueous ethanoic solution of NaOH gave rise to mesoporous carbon material. The resulting materials were characterized by N(2)-sorption, FTIR spectroscopy, X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, thermal analysis and cyclic voltammetry. Three dimensional interconnecting wormhole channel arrangement of mesoporous silica template leads to mesoporous carbon replica with surface area of 1200 m(2)/g. X-ray photoelectron spectroscopic study (XPS) of the mesoporous carbon material shows the concentration of carbon atom in the range of 97-98\% with 1-2\% oxygen and negligible amount of silica. The electrochemical double layer capacitance behavior of carbon material with the specific capacitance value of 88.0 F/g at the scan rate of 1 mV/s appears to be promising. (C) 2006 Elsevier Inc. All rights reserved.

}, keywords = {Electrochemical properties, hydroxy carboxylic acid, mesoporous carbon, Mesoporous silica, sodium silicate}, issn = {1387-1811}, doi = {10.1016/j.micromeso.2006.09.003}, author = {Karandikar, Prashant R. and Patil, K. R. and Mitra, A. and Kakade, Bhalchandra A. and Chandwadkar, Asha J.} } @article { ISI:000248609900029, title = {Use of poly(o-toluidine)/ZrO2 nanocomposite coatings for the corrosion protection of mild steel}, journal = {Journal of Applied Polymer Science}, volume = {106}, number = {1}, year = {2007}, month = {OCT}, pages = {220-229}, publisher = {JOHN WILEY \& SONS INC}, type = {Article}, address = {111 RIVER ST, HOBOKEN, NJ 07030 USA}, abstract = {

This study explored the possibility of using poly(o-toluidine) (POT)/ZrO2 nanocomposite coatings for the corrosion protection of mild steel in a chloride environment. POT/ZrO2 nanocomposite coatings were synthesized on steel substrates through an electrochemical route. These coatings were characterized with cyclic voltammetry, ultraviolet-visible absorption spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscopy, and X-ray photoelectron spectroscopy. The performance of POT/ZrO2 nanocomposites as protective coatings against the corrosion of mild steel in aqueous 3 wt \% NaCl was evaluated with the potentiodynamic polarization technique and electrochemical impedance spectroscopy. The results of this study demonstrate that POT/ZrO2 nanocomposite coatings provide better protection for mild steel against corrosion than pure POT coatings. The corrosion potential was about 0.312 V versus a saturated calomel electrode, more positive in aqueous 3 wt \% NaCl for the nanocomposite-coated steel than the uncoated steel, and the corrosion rate of steel was reduced by a factor of almost 51. (c) 2007 Wiley Periodicals, Inc.

}, keywords = {Coatings, conjugated polymers, FTIR, Nanocomposites, synthesis}, issn = {0021-8995}, doi = {10.1002/app.26469}, author = {Chaudhari, Sudeshna and Patil, P. P. and Mandale, A. B. and Patil, K. R. and Sainkar, S. R.} } @article { ISI:000255292000009, title = {Photocatalytic activity and characterization of sol-gel-derived Cr(III)-doped TiO(2)-coated active carbon composites}, journal = {Philosophical Magazine}, volume = {88}, number = {5}, year = {2008}, month = {APR}, pages = {767-779}, publisher = {TAYLOR \& FRANCIS LTD}, address = {4 PARK SQUARE, MILTON PARK, ABINGDON OX14 4RN, OXON, ENGLAND}, abstract = {

Cr(III)-doped, TiO(2)-coated active carbon (Cr-TiO(2)/AC) were prepared by a sol-gel method. The effect of supports, including TiO(2) and active carbon (AC), on the molecular structure and photocatalytic activity of chromium oxide for complete decomposition of EDTA has been examined with respect to the content of Cr on the catalyst surface. The photocatalytic activity of the Cr-TiO(2)/AC composites was evaluated in the decomposition of EDTA solution under UV irradiation. The results indicate that Cr-TiO(2)/AC has a higher efficiency in decomposition of EDTA than TiO(2), TiO(2)/AC or active carbon. This was attributed to the different functions of active carbon and chromate species. (1) Nanosize TiO(2) particles on composites were not reunited, possible because active carbon retards transformation of anatase into rutile and decreases the crystallite size. (2) Production of high concentrations of organic compound near Cr-TiO(2). (3) Carbon in active carbon causes some of the TiO(2) to reduce to Ti(3+) ions, which prevents electron-hole pair recombination. (4) Formation of polychromate species, with a stronger redox capability, on the surface of TiO(2)/AC. It was found that the addition of Cr to TiO(2) sol could suppress the grain growth of TiO(2) crystals and increase the hydroxyl content on the surface of TiO(2)/AC. The photocatalytic efficiency and activity of the composites remained good, even after three cycles.

}, keywords = {EDTA, photoactive, sol-gel, Titanium dioxide, XPS}, issn = {1478-6435}, doi = {10.1080/14786430801955261}, author = {Gambhire, A. B. and Lande, Machhindra K. and Mandale, A. B. and Patil, K. R. and Arbad, B. R.} } @article { ISI:000262183900001, title = {Synthesis and characterization of high surface area CeO2-doped SnO2 nanomaterial}, journal = {Materials Chemistry and Physics}, volume = {112}, number = {3}, year = {2008}, month = {DEC}, pages = {719-722}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

In the present investigation the synthesis and characterization of high surface area CeO2-doped SnO2 nanomaterial has been reported. The material was synthesized by coprecipitation process combined with surfactant incorporating method. The concentration level of Ce (III) additive was varied systematically from 1 to 11 wt.\%. After calcinations at500 degrees C,a high BET surface area of 40 m(2)/g was obtained for 7 wt.\% CeO2. The effect of variation of sintering temperature (600-800 degrees C/2h) on the particle size and surface area of a CeO2/SnO2 system was investigated. The material obtained was nanocrystalline, having particle size in the range of 10-16 nm. (C) 2008 Elsevier B.V. All rights reserved.

}, keywords = {CeO2:SnO2, Nanomaterials, sensors}, issn = {0254-0584}, doi = {10.1016/j.matchemphys.2008.06.022}, author = {Gambhire, A. B. and Lande, Machhindra K. and Kalokhe, S. B. and Shirsat, M. D. and Patil, K. R. and Gholap, Ramkrishna S. and Arbad, B. R.} } @article { ISI:000258026000010, title = {Synthesis and characterizations of NiTiO(3) nanoparticles prepared by the sol-gel process}, journal = {Philosophical Magazine Letters}, volume = {88}, number = {6}, year = {2008}, month = {MAR}, pages = {467-472}, publisher = {TAYLOR \& FRANCIS LTD}, type = {Article}, address = {4 PARK SQUARE, MILTON PARK, ABINGDON OX14 4RN, OXON, ENGLAND}, abstract = {

Nanocrystalline nickel titanate (NiTiO(3)) composite powders were prepared by the sol-gel process combined with a surfactant-assisted template method. The resulting powders were calcined at different temperatures ranging from 150 degrees C to 750 degrees C for 2 h in air. The results revealed that a pure hexagonal phase of NiTiO(3) could be obtained at the low temperature of 750 degrees C. The phase evolution of NiTiO(3) was investigated by X-ray diffraction patterns, Fourier-transform infrared spectroscopy, and X-ray photoelectron spectroscopy. Particle size and morphology were studied by transmission electron microscopy.

}, keywords = {Nanoparticles, nickel titanate, sol-gel process}, issn = {0950-0839}, doi = {10.1080/09500830802199709}, author = {Gambhire, A. B. and Lande, Machhindra K. and Kalokhe, S. B. and Mandale, A. B. and Patil, K. R. and Gholap, Ramkrishna S. and Arbad, B. R.} } @article { ISI:000271982400003, title = {Characterization of clay intercalated cobalt-salen catalysts for the oxidation of p-cresol}, journal = {Applied Catalysis A-General}, volume = {370}, number = {1-2}, year = {2009}, month = {NOV}, pages = {16-23}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The intercalation of cobalt-salen complexes into the interlamelar spaces of montmorillonite clay was investigated by various characterization studies. The {\textquoteleft}{\textquoteleft}neat{\textquoteright}{\textquoteright} cobalt-salen complex showed a weight loss at 368 degrees C while the weight loss for the corresponding intercalated complex was observed at much higher temperature of 492 degrees C due to decomposition of the complex. The thermal stabilization observed was due to the host-guest interaction of clay and metal complex and thus confirmed the intercalation. The XANES spectrum of Co(salen)-mont sample revealed the change of symmetry from the tetrahedral in plane to the octahedral structure having an axial bonding of oxygen to the cobalt, indicating that cobalt atoms in Co(salen)-mont were coordinated axially with the lattice oxygen of montmorillonite. Both XANES and EXAFS results indicated that cobalt atoms in Co(salen)-mont form two additional Co-O bonds with a bond length of 0.199 nm by the intercalation while retaining the Co-salen structure. Co-salen intercalated into the montmorillonite clay showed the highest activity for the air oxidation of p-cresol, giving 88\% selectivity to the oxidation products. Effects of NaOH concentration and various solvents on the conversion and selectivity patterns also have been studied. (C) 2009 Elsevier B.V. All rights reserved.

}, keywords = {Cobalt-oxygen bond, Cobalt-salen, Extended X-ray absorption fine structure, Intercalation, Lattice oxygen, Montmorillonite, X-ray absorption near edge structure}, issn = {0926-860X}, doi = {10.1016/j.apcata.2009.09.003}, author = {Kshirsagar, V. S. and Garade, Ajit C. and Mane, R. B. and Patil, K. R. and Yamaguchi, A. and Shirai, M. and Rode, C. V.} } @article { ISI:000263070700020, title = {Enhanced solar-radiation induced photocatalytic activity of surface-modified nanocrystalline anatase-titania}, journal = {Catalysis Letters}, volume = {128}, number = {1-2}, year = {2009}, month = {MAR}, pages = {137-143}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

Sol-gel derived pure nanocrystalline (similar to 20-30 nm) anatase-titania has been surface-modified by depositing silver(I) oxide and silver (predominantly the former) via UV-reduction process. The pure and surface-modified nanocrystalline anatase-titania have been characterized using different analytical techniques for determining the average nanocrystallite size, phase-contents, surface-chemistry, as well as the absorption and photoluminescence characteristics. It is demonstrated that, the latter exhibits an enhanced solar-radiation induced photocatalytic activity as compared to that of the former as a result of the absorption in the visible-region and enhanced photo-induced e(-)/h(+) life-time, both caused by the surface-deposition of silver(I) oxide and silver.

}, keywords = {Nanocrystalline, Photocatalysis, Silver, sol-gel, titania, UV-reduction}, issn = {1011-372X}, doi = {10.1007/s10562-008-9704-1}, author = {Priya, R. and Baiju, K. V. and Shukla, S. and Biju, S. and Reddy, M. L. P. and Patil, K. R. and Warrier, K. G. K.} } @article { ISI:000263932600008, title = {Synthesis and characterization of high-surface-area Ag2O-doped SnO2 nanomaterial}, journal = {Philosophical Magazine Letters}, volume = {89}, number = {3}, year = {2009}, month = {MAR}, pages = {PII 909257359}, publisher = {TAYLOR \& FRANCIS LTD}, address = {4 PARK SQUARE, MILTON PARK, ABINGDON OX14 4RN, OXON, ENGLAND}, abstract = {

Nanosized tin dioxide-based powders containing silver and palladium oxides have been prepared by coprecipitation reaction. XRD, TEM, and XPS analysis were carried out for investigation of crystalline structure and surface morphology. The best reactive conditions were determined, such as the concentration of the reactants, pH value, surfactants, reaction temperature, and time. The material obtained is nanocrystalline, having a particle size in the range of 5.21-7.42 nm. Effect of doped-Ag2O on the crystal size of the nanoparticles and the influence of the presence of a second dopant (Pd) on the Ag2O/SnO2 matrix was discussed.

}, keywords = {Ag2O:SnO2, Nanomaterials, XPS}, issn = {0950-0839}, doi = {10.1080/09500830902758651}, author = {Gambhire, A. B. and Lande, Machhindra K. and Kalokhe, S. B. and Shirsat, M. D. and Patil, K. R. and Gholap, Ramkrishna S. and Arbad, B. R.} } @article { ISI:000286305100010, title = {Effect of leakage current and dielectric constant on single and double layer oxides in MOS structure}, journal = {Thin Solid Films}, volume = {519}, number = {5, SI}, year = {2010}, note = {37th International Conference on Metallurgical Coatings and Thin Films, San Diego, CA, APR 26-30, 2010}, month = {DEC}, pages = {1530-1535}, publisher = {Amer Vacuum Soc, Adv Surface Engn Div}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

MOS structure of Al/Al2O3/n-Si, Al/TiO2/n-Si and Al/Al2O3/TiO2/n-Si was obtained by deposition of Al2O3 and TiO2 on silicon substrate by RF Magnetron Sputtering system. The total thickness of the oxide layer similar to 40 +/- 5 nm in the MOS structure was kept constant. Samples were characterized by X-Ray diffraction (XRD). X-Ray photoelectron spectroscopy (XPS), Impedance analyzer and Current-voltage (J-V) characteristics. The variations in the dielectric constant and tan 8 of the MOS capacitor in the frequency range of 1000Hz-1MHz were measured by impedance analyzer. The variation in dielectric constant of the Al/Al2O3/TiO2/n-Si multilayer compared to single layer of Al/Al2O3/n-Si and Al/TiO2/n-Si is due to high probability of defects, lattice mismatch and interface interactions. The steep rise of Tan 6 values in the Al/Al2O3/TiO2/n-Si structure is due to the resonance effect of both Al2O3 and TiO2 layers. The leakage current mechanisms of MOS structures were extracted from Schottky coefficient and Poole-Frenkel coefficient. Theoretical values of Schottky coefficients (beta(SC)) and Poole-Frenkel coefficients (beta(PF)) for each sample were estimated using the real part of the dielectric constant. The experimental values were calculated from J-V characteristics and compared with theoretical values. The appropriate model has been proposed. It was found that Schottky and Poole-Frenkel mechanisms are applicable at low and high field respectively for all MOS structures. The combination of Al/Al2O3/TiO2/n-Si is found to be a promising structure with high dielectric constant and low leakage current suitable for MOS devices. (C) 2010 Elsevier B.V. All rights reserved.

}, keywords = {Al2O3, dielectric constant, Leakage current, MOS device, Poole-Frenkel emission, Schottky emission, TiO2}, issn = {0040-6090}, doi = {10.1016/j.tsf.2010.08.089}, author = {Laha, Pinaki and Panda, A. B. and Dahiwale, S. and Date, Kalyani S. and Patil, K. R. and Barhai, P. K. and Das, A. K. and Banerjee, Indrani and Mahapatra, S. K.} } @article { ISI:000283349200004, title = {Investigations of CdS and Ag-CdS nanoparticles by X-ray photoelectron spectroscopy}, journal = {Applied Surface Science}, volume = {257}, number = {5}, year = {2010}, month = {DEC}, pages = {1390-1394}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

In the present report, CdS and Ag-CdS nanoparticles were synthesized using cysteine as a capping agent. Surface properties CdS and Ag-CdS nanoparticles were studied by X-ray photoelectron spectroscopy (XPS). XPS study of CdS nanoparticles was carried out as a function of pH and for a refluxed sample at pH 11.2. Effect of dopant concentration on surface properties of Ag-CdS nanoparticles was also studied for as prepared samples as well as for annealed sample at 2\% doping. Effect of pH, dopant concentration, and effect of particle size on different sulfur species present in the system was studied. Features of Cd 3d, S 2p and Ag 3d core level have been discussed in detail. (C) 2010 Elsevier B.V. All rights reserved.

}, keywords = {Ag-CdS, CdS, Cysteine, XPS}, issn = {0169-4332}, doi = {10.1016/j.apsusc.2010.08.035}, author = {Thakur, Priya and Joshi, Satyawati S. and Patil, K. R.} } @article { ISI:000275045600020, title = {Observation of photoconductivity in Sn-doped ZnO nanowires and their photoenhanced field emission behavior}, journal = {Journal of Physical Chemistry C}, volume = {114}, number = {9}, year = {2010}, month = {MAR}, pages = {3843-3849}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Sn-doped ZnO nanowire films have been Successfully synthesized by electrodeposition oil zinc foil followed by annealing in air at 400 degrees C for 4 h. The XRD patterns of the annealed specimens exhibit I set of well-defined diffraction peaks indexed to the wurtzite phase of ZnO. The Surface morphology of the as-synthesized films showed a network of densely packed flakes/sheets oil the Substrate. However, upon annealing, the formation of ZnO nanowires, processing length in the range of several micrometers and diameter less than 150 nm, oil the entire substrate is observed. The relative atomic percentage of Sri, estimated from the energy dispersive spectra, was found to be 0.5 and 2.0 in the ZnO films deposited for 10 and 40 min durations, respectively. Front the field emission studies, the Values of the turn-on field and threshold field, required to draw emission Current density of 10 and 100 mu A/cm(2), are observed to be 0.68 and 1.1 V/mu m for 0.5\% Sn-doped ZnO and 1.72 and 2.25 V/mu m for 2.0\% Sn-doped ZnO, respectively. The field emission Current stability investigated for a duration Of h at the preset value of 100 mu A is found to be excellent. A prominent photoenhancement in the field emission Current upon visible light illumination of the Sn-doped ZnO nanowires films has been observed. This enhancement has been attributed to the photoconductivity of the Sn-doped ZnO.

}, issn = {1932-7447}, doi = {10.1021/jp911080f}, author = {Sheini, Farid Jamali and More, Mahendra A. and Jadkar, Sandesh R. and Patil, K. R. and Pillai, Vijaymohanan K. and Joag, Dilip S.} } @article { ISI:000275170800011, title = {One-pot synthesis of oleic acid-capped cadmium chalcogenides (CdE: E = Se, Te) nano-crystals}, journal = {Journal of Nanoparticle Research}, volume = {12}, number = {1, SI}, year = {2010}, month = {JAN}, pages = {101-109}, publisher = {SPRINGER}, address = {VAN GODEWIJCKSTRAAT 30, 3311 GZ DORDRECHT, NETHERLANDS}, abstract = {

Surface-capped CdSe and CdTe nano-crystals (NCs) have been synthesized using cadmium acetate, oleic acid and respective tri-octylphosphine chalcogenide (TOPE; E = Se/Te) in diphenyl ether (DPE). Well-dispersed CdSe particles showed two absorption bands at the region of 431-34 and 458-60 nm in optical absorption study. A band-edge emission resulted at 515 nm with an excitation energy of 400 nm, in its photoluminescence (PL) spectrum. Similarly, UV-visible absorption study of CdTe revealed an absorption band at \< 700 nm. The broadened X-ray diffraction (XRD) pattern showed that at higher reaction temperature cubic CdSe but hexagonal CdTe can be obtained with crystallite size of \< 10 nm. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) revealed that agglomerated particles are of spherical nature. The inter-planar spacing in CdTe was measured to be 0.406 nm, a characteristic of (100) lattice plane in hexagonal CdTe. X-ray photoelectron spectroscopy (XPS) showed that CdSe NCs have better air stability stable than CdTe. Presence of organic moiety around the semiconductor particles was confirmed by infrared (IR) spectroscopy.

}, keywords = {Chemical synthesis, photoluminescence, Semiconductors, Surface capping}, issn = {1388-0764}, doi = {10.1007/s11051-008-9581-y}, author = {Khanna, P. K. and Rao, K. Srinivasa and Patil, K. R. and Singh, V. N. and Mehta, B. R.} } @article { ISI:000274292700015, title = {Polymer-supported palladium-imidazole complex catalyst for hydrogenation of substituted benzylideneanilines}, journal = {Journal of Molecular Catalysis A-Chemical}, volume = {317}, number = {1-2}, year = {2010}, month = {FEB}, pages = {111-117}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The polymer-supported palladium-imidazole complex catalyst was synthesized and characterized by various techniques Such as elemental analysis, IR spectroscopy and TG analysis. The physico-chemical properties such as bulk density, Surface studies by BET method and swelling studies of catalyst in different solvents were investigated. XPS Studies were carried out to identify the oxidation state of palladium in the catalyst. The morphology of the support and the catalyst was studied using scanning electron microscope. Using the synthesized catalyst, hydrogenation of benzylideneaniline and a few of its para Substituted derivatives was carried out at ambient conditions. The influence of variation in temperature, concentration of the catalyst as well as the substrate on the rate of reaction Was Studied. The catalyst showed an excellent recycling efficiency over six cycles without leaching of metal from the polymer support. (C) 2009 Elsevier B.V. All rights reserved.

}, keywords = {Benzylideneaniline, Hydrogenation, kinetics, Polymer-supported palladium-imidazole complex catalyst}, issn = {1381-1169}, doi = {10.1016/j.molcata.2009.10.030}, author = {Udayakumar, V. and Alexander, S. and Gayathri, V. and Shivakumaraiah and Patil, K. R. and Viswanathan, B.} } @article { ISI:000281175500059, title = {Simple chemical co-precipitation/calcination route for the synthesis of simulated synroc-B and synroc-C powders}, journal = {Materials Chemistry and Physics}, volume = {123}, number = {2-3}, year = {2010}, month = {OCT}, pages = {695-699}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

A simple chemical co-precipitation/calcination route was developed for the synthesis of simulated synroc-B and synroc-C powders using mostly nitrate salts as starting chemicals and 20\% ammonia solution as precipitant. In this route, a mixed solution containing Al-nitrate, Ca-nitrate, Ba-nitrate, zirconyl nitrate and titanyl nitrate in the molar proportion required for synroc-B is added to dilute ammonia solution to precipitate these cations in the form of their hydroxides at room temperature by maintaining pH approximate to 10.5 during precipitation. Formation of a major fluorite phase with minor amounts of anatase, rutile and hollandite phases is observed in the powder obtained after calcination in air at 750 degrees C. Multiphase crystalline synroc-B matrix containing hollandite, perovskite, zirconolite, and rutile phases is obtained after sintering the heat treated powder in the form of pellets at 1230 degrees C for 4h in air. Similarly, pure synroc-C phases with 14 and 20\% simulated waste loadings were synthesized following the same synthesis protocol. These pre-treated powders with a high surface area of similar to 25 m(2) g(-1) gave sintered ceramics having density of similar to 90\% for 14 and 20\% waste loadings. (C) 2010 Elsevier B.V. All rights reserved.

}, keywords = {Ceramics, Chemical synthesis, Oxides, Sintering}, issn = {0254-0584}, doi = {10.1016/j.matchemphys.2010.05.039}, author = {Potdar, H. S. and Vijayanand, S. and Mohaideen, Kamal Khaja and Patil, K. R. and Joy, Pattayil Alias and Madhavan, R. Raja and Kutty, K. V. G. and Ambashta, Ritu D. and Wattal, P. K.} } @article { ISI:000288483400033, title = {Characterization of surface acid sites in tin-silicalite-1 (Sn-MFI) molecular sieve by X-ray photoelectron spectroscopy}, journal = {Microporous and Mesoporous Materials}, volume = {141}, number = {1-3}, year = {2011}, month = {MAY}, pages = {236-240}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The nature, strength and density of surface acid sites in Sn-MFI molecular sieves with different Sn-content were characterized by N 1s high resolution photoelectron peak of chemisorbed pyridine in combination with pyridine-IR and TPAD. Two peaks emerged at 399.5 +/- 0.2 and 401.5 +/- 0.2 eV by deconvoluting composite N is peak were assigned to chemisorbed pyridine on weak and relatively strong Lewis acid sites, respectively. The relative percentage of strong Lewis acid sites was found to increase with the decrease of framework Sn content. A close agreement was observed between the ratios of weak Lewis acid sites to strong Lewis acid sites obtained from XPS and TPAD. (C) 2010 Elsevier Inc. All rights reserved.

}, keywords = {Lewis acidity, Pyridine chemisorption, SiO2/SnO2 molar ratio, Sn-MFI, XPS}, issn = {1387-1811}, doi = {10.1016/j.micromeso.2010.10.036}, author = {Niphadkar, P. S. and Patil, K. R. and Joshi, P. N.} } @article { ISI:000286904800076, title = {Degradation of methylene blue via photocatalysis of transition metal-loaded sulfated TiO2}, journal = {Materials Chemistry and Physics}, volume = {125}, number = {3}, year = {2011}, month = {FEB}, pages = {807-812}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Transition metal-loaded nanocrystalline SO42-/TiO2 powders were prepared by sol-gel method. Anatase is found as the active phase in all the samples. Sulfation process clearly stabilizes TiO2 catalyst phase against sintering, maintaining anatase phase and relatively high surface area values with respect to pure TiO2. Wide structural and surface characterization of samples was carried out in order to establish a correlation between the effect of sulfation and metal incorporation on the TiO2 photocatalytic properties. The maximum photocatalytic decomposition of methylene blue solution was achieved with sulfation of TiO2. In addition, incorporation of metal into the structure of SO42-/TiO2 seems to enhance the photocatalytic activity of the samples, which is ascribed to the enlargement of specific surface area, photogenerated carriers separation, light absorption, as well as the higher surface acidity. (C) 2010 Elsevier B.V. All rights reserved.

}, keywords = {nanomaterial, Photocatalytic activity, sol-gel process}, issn = {0254-0584}, doi = {10.1016/j.matchemphys.2010.09.053}, author = {Gambhire, A. B. and Lande, Machhindra K. and Arbad, B. R. and Rathod, S. B. and Gholap, Ramkrishna S. and Patil, K. R.} } @article { ISI:000288772300011, title = {Magnetic properties of thermal plasma synthesized nanocrystalline nickel ferrite (NiFe2O4)}, journal = {Journal of Alloys and Compounds}, volume = {509}, number = {12}, year = {2011}, month = {MAR}, pages = {4404-4413}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

A rapid synthesis method is reported for magnetic nanoparticles of nickel ferrite involving thermal plasma assisted vapor phase condensation process. The as-synthesized samples were characterized by X-ray Diffraction, Transmission Electron Microscopy, Vibrating Sample Magnetometer and X-ray Photoelectron Spectroscopy techniques. The average particle size was determined from the TEM micrographs and found to be around 30 nm. The effects of reactor parameters on the magnetic and structural properties have been evaluated, to find the optimized parameters so as to achieve the highest values of saturation magnetization and coercivity. Reasonably high saturation magnetization (48 emu/g) has been assigned to the high degree of crystallinity, achieved on account of high temperature during the growth, and the cation redistribution. The high value of coercivity (1150e) is explained on the basis of possible lattice defects arising from the cation redistribution. Detailed analysis of cation distribution using the XRD line intensity data leads to the conclusion that these samples are iron deficit and nickel rich. (C) 2011 Elsevier B.V. All rights reserved.

}, keywords = {crystal structure, Magnetic measurements, Magnetization, Nanostructured materials, TEM}, issn = {0925-8388}, doi = {10.1016/j.jallcom.2011.01.057}, author = {Nawale, Ashok B. and Kanhe, Nilesh S. and Patil, K. R. and Bhoraskar, S. V. and Mathe, Vikas L. and Das, A. K.} } @article { ISI:000289600300032, title = {One-step in situ synthesis of NHx-adsorbed rhodium nanocrystals at liquid-liquid interfaces for possible electrocatalytic applications}, journal = {Journal of Colloid and Interface Science}, volume = {358}, number = {1}, year = {2011}, month = {JUN}, pages = {238-244}, publisher = {ACADEMIC PRESS INC ELSEVIER SCIENCE}, address = {525 B ST, STE 1900, SAN DIEGO, CA 92101-4495 USA}, abstract = {

Nearly monodisperse rhodium nanoparticles with adsorbed NHx were synthesized at the CCl4-water interface. The presence of NHx-adsorbed species was confirmed by energy-dispersive X-ray analysis (EDX) and X-ray photoelectron spectroscopy (XPS) studies. The synthesis of controlled size 2-38 nm rhodium particles was studied as a function of reducing agent concentration by transmission electron microscopy (TEM). HRTEM confirmed the formation of rhodium nanoparticles having fringe spacing consistent with reported Rh (1 1 1) planes. The continuity of these films over an area of 1 x 1 pm was revealed by atomic force microscopy (AFM) studies. The electrocatalytic application of these nanostructure Rh-NHx), thin films for formaldehyde oxidation in 0.5 M NaOH was investigated by cyclic voltammetry. The Rh nanoparticles formed by the present strategy are expected to be useful for other catalytic applications also. (C) 2011 Elsevier Inc. All rights reserved.

}, keywords = {Hydrazine hydrate, Liquid-liquid interface, Nanoparticles, Rhodium, Thin films}, issn = {0021-9797}, doi = {10.1016/j.jcis.2011.02.065}, author = {Patil, V. S. and Krishna, S. R. and Hawaldar, Ranjit R. and Gaikwad, A. B. and Sathaye, S. D. and Patil, K. R.} } @article { ISI:000291725100012, title = {Synthesis of Cu-ZnO and C-ZnO nanoneedle arrays on zinc foil by low temperature oxidation route: effect of buffer layers on growth, optical and field emission properties}, journal = {Applied Surface Science}, volume = {257}, number = {20}, year = {2011}, month = {AUG}, pages = {8366-8372}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Different densities of ZnO nanoneedle films have been prepared by pre-coated zinc foils with thin layer of copper and carbon followed by thermal oxidation at 400 degrees C in air. The X-ray diffraction patterns show well defined peaks, which could be indexed to the wurtzite hexagonal phase of ZnO. The scanning electron microscope images clearly reveal formation of ZnO needles on the entire substrate surface. The X-ray photoelectron spectroscopy studies indicate that Cu and C ions are incorporated into the ZnO lattice. Photoluminescence studies evaluate different emission bands originated from different defect mechanism. From the field emission studies, the threshold field, required to draw emission current density of similar to 100 mu A/cm(2), is observed to be 2.25 V/mu m and 1.57 V/mu m for annealed zinc foil pre-coated with copper and carbon, respectively. The annealed film with copper layer exhibits good emission current stability at the pre-set value of similar to 100 mu A over a duration of 4 h. The results show that buffer layer is an important factor to control the growth rate, resulting in different density of ZnO needles, which leads to field emission properties. This method may have potential in fabrication of electron sources for high current density applications. (C) 2011 Elsevier B. V. All rights reserved.

}, keywords = {Buffer layer, Carbon, Copper, field emission, Nanoneedle, ZnO}, issn = {0169-4332}, doi = {10.1016/j.apsusc.2011.04.023}, author = {Jamali-Sheini, Farid and Patil, K. R. and Joag, Dilip S. and More, Mahendra A.} } @article { ISI:000311350000043, title = {Effect of preparation parameters of Cu catalysts on their physico-chemical properties and activities for glycerol hydrogenolysis}, journal = {Catalysis Today}, volume = {198}, number = {1, SI}, year = {2012}, month = {DEC}, pages = {321-329}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Cu based catalysts were prepared by co-precipitation, alkali fusion followed by precipitation and direct solid state fusion methods. The changes in the phase formation, morphology, crystallite size, extent of aggregation, strength and nature of acid sites were observed due to variations in precipitating agents and also their order of addition. The catalyst prepared by co-precipitation using Na2CO3 showed the predominant presence of metallic Cu phase with a crystallite size of 5 nm, well segregated spherical morphology and highest acidity in the activated sample. These intrinsic properties contributed to achieve the highest glycerol conversion of 62\% and 1,2-PDO selectivity of 88\% in glycerol hydrogenolysis. (C) 2012 Elsevier B.V. All rights reserved.

}, keywords = {Co-precipitation, Cu catalysts, Glycerol hydrogenolysis, Physico-chemical properties, Solid state fusion}, issn = {0920-5861}, doi = {10.1016/j.cattod.2012.05.051}, author = {Mane, R. B. and Kondawar, S. E. and Niphadkar, P. S. and Joshi, P. N. and Patil, K. R. and Rode, C. V.} } @article { ISI:000313404400021, title = {Magnetic properties of nanocrystalline CoFe2O4 synthesized by thermal plasma in large scale}, journal = {Materials Chemistry and Physics}, volume = {137}, number = {2}, year = {2012}, month = {DEC}, pages = {586-595}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

The paper reports the large scale synthesis of nanoparticles of CoFe2O4 using thermal plasma reactor by gas phase condensation method. The yield of formation was found to be around 15 g h(-1). The magnetic properties of CoFe2O4, synthesized at different reactor powers, were investigated in view of studying the effect of operating parameters of plasma reactor on the structural reorganization leading to the different cation distribution. The values of saturation magnetization, coercivity and remanent magnetization were found to be influenced by input power in thermal plasma. Although the increase in saturation magnetization was marginal (61 emu g(-1) to 70 emu g(-1)) with increasing plasma power; a significant increase in the coercivity (552 Oe to 849 Oe) and remanent magnetization (16 emu g(-1) to 26 emu g(-1)) were also noticed. The Mossbauer spectra showed mixed spinel structure and canted spin order for the as synthesized nanoparticles. The detailed analysis of cation distribution using the Mossbauer spectroscopy and X-ray photoelectron spectroscopy leads to the conclusion that the sample synthesized at an optimized power shows the different site selective states. (C) 2012 Elsevier B.V. All rights reserved.

}, keywords = {Magnetic materials, magnetic properties, Mossbauer spectroscopy, Nanostructures}, issn = {0254-0584}, doi = {10.1016/j.matchemphys.2012.10.007}, author = {Nawale, A. B. and Kanhe, Nilesh S. and Patil, K. R. and Reddy, V. R. and Gupta, A. and Kale, B. B. and Bhoraskar, S. V. and Mathe, Vikas L. and Das, A. K.} } @article { ISI:000305112000030, title = {Novel microwave assisted sol-gel synthesis (MW-SGS) and electrochromic performance of petal like h-WO3 thin films}, journal = {Materials Research Bulletin}, volume = {47}, number = {7}, year = {2012}, month = {JUL}, pages = {1787-1793}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Use of domestic microwave oven is first time employed for chemical deposition of nanocrystalline hexagonal WO3 (h-WO3) thin films. Low cost precursors like sodium tungstate, hydrochloric acid, oxalic acid and potassium sulfate signifies cost effectiveness of this thin film fabrication route. Scanning electron microscopy images reveal formation of petal like nanodisks. A number of analytical techniques were used to characterize the WO3 petal like nanodisks, including X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDX). X-ray photoelectron spectroscopy, FT-IR spectroscopy, Raman scattering spectroscopy, UV-visible spectrophotometry and cyclic voltammetry (CV). The X-ray photoelectron spectroscopic studies revealed 2.89 O/W atomic ratio. The electrical transport studies on WO3 thin films show semiconducting behavior with n-type semiconductivity. The value of determined coloration efficiency is 57.90 cm(2)/C. The mechanism of Li+ intercalation and deinercalation in h-WO3 matrix is proposed for enhanced electrochromism. (C) 2012 Elsevier Ltd. All rights reserved.

}, keywords = {Chemical synthesis, Electrochemical properties, Oxides, photoelectron spectroscopy}, issn = {0025-5408}, doi = {10.1016/j.materresbull.2012.03.025}, author = {Kharade, Rohini R. and Patil, K. R. and Patil, P. S. and Bhosale, Popatrao N.} } @article { ISI:000309645000077, title = {Surface characterization of Au-ZnO nanowire films}, journal = {Ceramics International}, volume = {38}, number = {8}, year = {2012}, month = {DEC}, pages = {6665-6670}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

Au-ZnO nanowire films have been synthesized by annealing Zn foils coated with a thin layer of gold. An X-ray diffraction study found that the synthesized ZnO consists mainly of a hexagonal wurtzite structure along with a small amount of AuZn3 phase. Scanning electron images showed that the ZnO wires extend to several microns in length. X-ray photoelectron spectroscopy studies confirmed the oxidation states of Au and Zn. An asymmetric O ls peak indicates the presence of oxygen in an oxide layer and O H groups on the films surfaces. Photoluminescence (PL) spectra showed different visible peaks for pre-annealed films, while for annealed films an UV peak appeared. In addition, the PL analysis showed that the overall intensity of photoluminescence decreased significantly after the films were annealed. Raman spectroscopy results also indicated that the crystalline quality of the films improved with annealing. This could be attributed to a decrease in oxygen vacancies and/or absorption of O-H groups on the surface of ZnO film. The highly hydrophilic surface with a water contact angle of similar to 155 degrees was obtained after annealing in air. (c) 2012 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

}, keywords = {Au-ZnO, Highly hydrophilic, Nanowires, XPS}, issn = {0272-8842}, doi = {10.1016/j.ceramint.2012.05.054}, author = {Jamali-Sheini, Farid and Yousefi, Ramin and Patil, K. R.} } @article { ISI:000312004800088, title = {Bulk and surface structure characterization of nanoscopic silver doped lanthanum chromites}, journal = {Applied Surface Science}, volume = {264}, year = {2013}, month = {JAN}, pages = {574-580}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Crystalline state of lanthanum chromites with silver as a dopant has been studied by X-ray diffraction and transmission electron microscopy reveals microscopic properties of grain boundaries. X-ray photoelectron spectroscopy has been used to analyze surface states with atomic ratio of La, Cr, O and Ag as a dopant. LaCrO3 shows mixed valence states of chromium while the silver doped samples exhibit differences in chromium concentration with the oxidation of Cr3+ to Cr6+ in presence of chromium nitrate as a precursor salt. Trivalent stable state of chromium is observed for samples synthesized by chromic acetate as a precursor salt. (C) 2012 Elsevier B.V. All rights reserved.

}, keywords = {Energy dispersive analysis of X-rays, Microwave combustion synthesis, Perovskite nanostructures, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy}, issn = {0169-4332}, doi = {10.1016/j.apsusc.2012.10.067}, author = {Desai, P. A. and Joshi, P. N. and Patil, K. R. and Athawale, Anjali A.} } @article { ISI:000316238400025, title = {One pot synthesis, growth mechanism and optical properties of Zn1-xCdxSe graded core/shell and alloy nanocrystals}, journal = {Journal of Luminescence}, volume = {135}, year = {2013}, month = {MAR}, pages = {154-159}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Comparatively higher photoluminescence yield along with robustness of core/shell semiconductor nanocrystals make them attractive candidates for studying intricate quantum size effects. Here, we report, one pot synthesis of Zn1-xCdxSe graded core/shell structures by exploiting change in the reactivity of precursors. Optical and structural measurements indicate formation of graded structure. Growth mechanism probed by inductively coupled plasma atomic emission spectroscopy shows formation of graded core/shell structure, with CdSe rich core and ZnSe rich shell. Annealing these nanocrystals, in chemical bath, leads to diffusion of Cd from core to shell region. Formation of Zn1-xCdxSe alloy is also observed in X-ray photoelectron spectroscopic measurements, confirming the diffusion of Cd from core to shell region. Substantially high photoluminescence quantum efficiency of 60\% with narrow line width of about 27 nm, was observed and is attributable to the reduced strain due to graded core/shell structure. (C) 2012 Elsevier B.V. All rights reserved.

}, keywords = {Graded core/shell, II-VI Semiconductor, Luminescence, Optical properties, Semiconductor alloy}, issn = {0022-2313}, doi = {10.1016/j.jlumin.2012.10.042}, author = {Sonawane, Kiran G. and Patil, K. R. and Mahamuni, Shailaja} } @article { ISI:000345479000014, title = {Effect of preparation parameters on characterization and activity of Co3O4 catalyst in liquid phase oxidation of lignin model substrates}, journal = {Applied Catalysis A-General}, volume = {487}, year = {2014}, month = {OCT}, pages = {130-138}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The nano structured spinel cobalt oxide (Co3O4) was prepared via simple co-precipitation method and its catalytic activity was evaluated for the liquid phase aerobic oxidation of lignin sub structure compounds such as veratryl alcohol. Catalyst preparation parameters influenced its morphology eventually affecting its oxidation activity. Thus, nano rod shaped CO3O4 catalyst showed 75\% and 38\% conversion of veratryl alcohol with complete selectivity to veratryl aldehyde in toluene and water, respectively, under base free condition. The influence of reaction conditions, such as temperature, oxygen pressure and catalyst loading was studied to obtain the optimum product yield and selectivity to the desired product. Furthermore, oxidation of various sub-structures of lignin model compounds was also studied over the same catalyst which was found to be in the following order: secondary alcohol \>di-substituted \> tri-substituted \> monosubstituted \> non-substitution. The stability of the catalyst was confirmed by its successful recycle for three times. (c) 2014 Elsevier B.V. All rights reserved.

}, keywords = {Coniferyl alcohol, Nano Co3O4, Sinapyl alcohol, TPR, Veratryl alcohol}, issn = {0926-860X}, doi = {10.1016/j.apcata.2014.08.023}, author = {Mate, Vivek R. and Jha, Ajay and Joshi, U. D. and Patil, K. R. and Shirai, M. and Rode, C. V.} } @article { ISI:000341455400031, title = {Humidity-sensing studies of cerium oxide nanoparticles synthesizedby non-isothermal precipitation}, journal = {Sensors and Actuators B-Chemical}, volume = {203}, year = {2014}, month = {NOV}, pages = {229-238}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

We report the fabrication of a highly sensitive and fast humidity sensor based on cerium oxide (CeO2) nanoparticles, which were prepared at low cost via a simple non-isothermal precipitation method. The asprepared CeO2 nanoparticles were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy( TEM) and the results indicated the formation of face centered cubic phase of CeO2 with average crystallite size of approximately 10-12 nm. Humidity sensors based on CeO2 nanoparticles exhibit high and linear response within the whole relative humidity (RH) range of 11-97\% at an operating frequency of 60 Hz. The corresponding impedance changes by approximately three orders of magnitude within the entire humidity range from 11\% to 97\% RH. The response and recovery times are about 2-3 and 9-10 s, respectively, when RH was switched between 11\% and 97\%. Furthermore, the sensors also show relatively small hysteresis, excellent reproducibility, long term stability and broad range of operation (11-97\% RH). The complex impedance spectra of the sensor at different RHs and the equivalent circuit were analyzed to explore the humidity-sensing mechanism. This study demonstrates that the CeO2 nanoparticles prepared by non-precipitation method can be used as the humidity-sensing material for the fabrication of humidity sensors. (C) 2014 Elsevier B. V. All rights reserved.

}, keywords = {CeO2 nanoparticles, Complex impedance spectra, humidity sensor, Non-isothermal precipitation, TEM}, issn = {0925-4005}, doi = {10.1016/j.snb.2014.06.107}, author = {Khadse, V. R. and Thakur, Sharada and Patil, K. R. and Patil, Pradip} } @article { ISI:000336351800043, title = {Solar photocatalytic degradation of methylene blue using doped TiO2 nanoparticles}, journal = {Solar Energy}, volume = {103}, year = {2014}, month = {MAY}, pages = {473-479}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Doped-TiO2 nanoparticles (M:TiO2: Fe, Zn, Zr, Sb, Ce and nM:TiO2: B, C, N, P, S) with anatase structure were prepared by sol-gel method and characterized by X-ray diffraction (XRD), Transmission electron microscopy (TEM), X-ray photoelectron spectra (XPS), Brunauer-Teller method (BET), UV-Vis diffuses reflectance spectroscopy (DRS). Results revealed that the anatase structure is highly stable for all doped TiO2 prepared compounds with enhancement in the surface area. UV-Vis diffuse reflectance spectra showed that these dopants were responsible for narrowing the band gap of TiO2 and shifting its optical response from ultraviolet to visible-light region. The photocatalytic activities of these multi-doped TiO2 catalysts were investigated by degradation methylene blue in aqueous solution under solar-light illumination. The results showed an appreciable enhancement in the photoactivity of the C-doped TiO2 as compared to other multi-doped TiO2 because of the formation of Ti+3 species which prevent the recombination of electron-hole pairs in C-doped TiO2. (C) 2014 Elsevier Ltd. All rights reserved.

}, keywords = {Carbon, iron, Methylene blue, Solar photocatalysis}, issn = {0038-092X}, doi = {10.1016/j.solener.2014.02.043}, author = {Bhosale, R. R. and Pujari, S. R. and Muley, G. G. and Patil, S. H. and Patil, K. R. and Shaikh, M. F. and Gambhire, A. B.} } @article { ISI:000341464100041, title = {Surface studies on benzophenone doped PDMS microstructures fabricated using KrF excimer laser direct write lithography}, journal = {Applied Surface Science}, volume = {314}, year = {2014}, month = {SEP}, pages = {292-300}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

his paper discusses microfabrication process for benzophenone doped polydimethylsiloxane (PDMS) using laser lithography. KrF excimer laser of 248 nm with 20 ns pulse width at repetition rate of 1 Hz was used for microfabrication of undoped and benzophenone doped PDMS. The doped-PDMS shows sensitivity below 365 nm, permitting processing under ambient light. The analysis of etch depth revealed that doped PDMS shows self developable sensitivity at lower fluence of similar to 250 mJ/cm(2). The unexposed and exposed surface was studied using Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy and Scanning electron microscopy (SEM). Spectrocopic analysis indicated increase in C-O, C=O, Si-O-3 and Si-O-4 bonding at the expense of Si-C and Si-O-2 bonds of PDMS. In case of laser exposed doped-PDMS, removal of benzophenone from probe depth of spectroscopy was observed. Whereas the surface morphology of exposed and unexposed doped-PDMS was observed to be same, indicating clean development of PDMS micropattems. The present study indicates that addition of 3.0 wt.\% benzophenone in PDMS enhance self development sensitivity of PDMS. The self developable results on doped-PDMS are quite encouraging for its potential use in point of care Lab-On-Chip applications, for fabricating micropattems using direct write laser lithography technology.\ 

}, keywords = {Direct write laser lithography, Microfabrication, micropatterning, Poly(dimethylsiloxane) (PDMS)}, issn = {0169-4332}, doi = {10.1016/j.apsusc.2014.06.054}, author = {Kant, Madhushree Bute and Shinde, Shashikant D. and Bodas, Dhananjay S. and Patil, K. R. and Sathe, V. G. and Adhi, K. P. and Gosavi, S. W.} } @article { ISI:000338820600009, title = {Synthesis and luminescence of graphene-nano calcium sulphide composite}, journal = {Materials Chemistry and Physics}, volume = {147}, number = {1-2}, year = {2014}, month = {SEP}, pages = {57-64}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Graphene-nanocrystalline calcium sulphide has been synthesized using in-situ reduction of calcium salt and graphene oxide. Graphene oxide was prepared using Hummer{\textquoteright}s method. Surface morphology and crystal structure of samples were observed by transmission electron microscopy (TEM) and X-Ray diffraction (XRD). Ultra thin graphene and graphene oxide sheets with size ranging between tens to several hundreds of square nanometers are observed in TEM images. The TEM micrographs of G-CaS show that CaS particles are embedded in graphene sheets and the average particle size of CaS particles in the composite is less than 50 nm. The reduction in the intensity of various functional groups in FTIR spectrum also confirms the formation of graphene. The UV-Visible spectra of CaS shows absorption peak at 220 nm with a small shoulder at 250 nm whereas in G-CaS 220 nm absorption peak has reduced intensity and the shoulder at 250 nm has now shifted to 270 nm due to modification in the defect structure of CaS by graphene. CaS and G-CaS shows photoluminescence emission at 470 nm (lambda(exc.) = 375 nm) and 440 nm (lambda(exc.) = 350 nm) respectively, however emission intensity of G-CaS is relatively lower than CaS. Although the emission intensity is found to be lower than CaS, addition of CaS to graphene in G-CaS complex has made graphene luminescent. XPS spectra also indicate reduction of various oxygen containing functional groups in highly reduced graphene oxide and G-CaS. (C) 2014 Elsevier B.V. All rights reserved.

}, keywords = {Luminescence, Nanostructures, powder diffraction, Precipitation}, issn = {0254-0584}, doi = {10.1016/j.matchemphys.2014.04.006}, author = {Sharma, Geeta and Patil, K. R. and Gosavi, S. W.} } @article { ISI:000357961800065, title = {Hydrothermal synthesis and characterization of carbon nanospheres: a mechanistic insight}, journal = {RSC Advances}, volume = {5}, number = {73}, year = {2015}, month = {JUN}, pages = {59491-59494}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Hydrothermally synthesized carbon nanospheres (CNS) follow a process of early nucleation followed by growth during synthesis. Here we report that growth occurs precisely after 5 min and prior to it nucleation occurs. The nucleation is a brief step in nanoparticle formation followed by growth of the nanoparticle depending on the reaction parameters.

}, issn = {2046-2069}, doi = {10.1039/c5ra10194h}, author = {Bhagat, P. N. and Patil, K. R. and Bodas, Dhananjay S. and Paknikar, K. M.} } @article {44632, title = {Morphology and thermophysical properties of non-aqueous titania nanofluids}, journal = {Heat and Mass Transfer}, volume = {54}, year = {2018}, month = {SEP}, pages = {2645-2650}, abstract = {

This work deals with the experimental investigation on thermophysical properties of TiO2-nanofluids and characterization of morphology and structure of TiO2 nanoparticles. Non-aqueous liquids like silicone oil and ethylene glycol are used as base fluids to prepare the nanofluids. Thermophysical properties including viscosity and thermal conductivity of these nanofluids are measured at different concentrations and temperatures. Results showed that silicone oil-based TiO2 nanofluid is Newtonian and the viscosity of this nanofluid increases with the loading of nanoparticles but it decreases nonlinearly with increasing temperature. Existing viscosity models are found unable to predict the viscosity of nanofluids. Although the effective thermal conductivities of both the silicone oil and ethylene glycol-based nanofluids increased with the TiO2 concentration, their enhanced thermal conductivity was found to decrease with increasing temperature.

}, issn = {0947-7411}, doi = {10.1007/s00231-018-2308-4}, author = {Murshed, S. M. S. and Santos, F. J. V. and Nieto de Castro, C. A. and Patil, V. S. and Patil, K. R.} }