@article { ISI:000357808500016,
	title = {Single-layer graphene-assembled 3D porous carbon composites with PVA and Fe3O4 nano-fillers: an interface-mediated superior dielectric and EMI shielding performance},
	journal = {Physical Chemistry Chemical Physics},
	volume = {17},
	number = {28},
	year = {2015},
	month = {JUN},
	pages = {18353-18363},
	publisher = {ROYAL SOC CHEMISTRY},
	address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND},
	abstract = {<p>In this study, a novel composite of Fe3O4 nanofiller-decorated single-layer graphene-assembled porous carbon (SLGAPC) with polyvinyl alcohol (PVA) having flexibility and a density of 0.75 g cm(-3) is explored for its dielectric and electromagnetic interference (EMI) response properties. The composite is prepared by the solution casting method and its constituents are optimized as 15 wt\% SLGAPC and 20 wt\% Fe3O4 through a novel solvent relaxation nuclear magnetic resonance experiment. The PVA-SLGAPC-Fe3O4 composite shows high dielectric permittivity in the range of 1 Hz-10 MHz, enhanced by a factor of 4 as compared to that of the PVA-SLGAPC composite, with a reduced loss by a factor of 2. The temperature dependent dielectric properties reveal the activation energy behaviour with reference to the glass transition temperature (80 degrees C) of PVA. The dielectric hysteresis with the temperature cycle reveals a remnant polarization. The enhanced dielectric properties are suggested to be the result of improvement in the localized polarization of the integrated interface system (Maxwell-Wagner-Sillars (MWS) polarization) formed by the uniform adsorption of Fe3O4 on the surface of SLGAPC conjugated with PVA. The EMI shielding property of the composite with a low thickness of 0.3 mm in the X-band (8.2-12.4 GHz) shows a very impressive shielding efficiency of similar to 15 dB and a specific shielding effectiveness of 20 dB (g cm(-3))(-1), indicating the promising character of this material for flexible EMI shielding applications.</p>},
	issn = {1463-9076},
	doi = {10.1039/c5cp02476e},
	author = {Rao, B. V. Bhaskara and Yadav, Prasad and Aepuru, Radhamanohar and Panda, H. S. and Ogale, Satishchandra and Kale, S. N.}
}
@article {48988,
	title = {Evaluation of Fe3O4 incorporated functionalized carbon nanotube self-standing buckypaper as electrodes for solid-state symmetric supercapacitor},
	journal = {Journal of Energy Storage },
	volume = {73},
	year = {2023},
	month = {DEC },
	pages = {109-101},
	type = {Article},
	abstract = {<p>
	Iron (II, III) oxide and carbonaceous materials drawn considerable attention in energy storage owing to their special features. In this study, simple reverse co-precipitation, acid functionalization and vacuum filtration methods adopted to synthesis Fe3O4 nanoparticles of size 11 nm and -COOH acid functionalized multi-wall carbon nanotubes (FMWCNT). And further used them to prepare and optimize Fe3O4 in FMWCNT as 15 wt\% and 25 wt\% self-standing buckypapers of around 30-mu m thickness as electrodes for solid-state symmetric capacitor in the form of coin cell. The results show that 15 wt\% and 25 wt\% of Fe3O4-FMWCNT buckypapers hybrid nanostructures have Fe3O4 nanoparticles successfully incorporated in FMWCNT. The 25 wt\% Fe3O4-FMWCNT electrodes with charge transfer resistance of 140 Ohm showed high areal specific capacitance (Cs) 78.5 mF/cm2 and retained 80 \% of its Cs until 800 cycles even at high current density of 1 mA/cm2, scan rate of 100 mV/s whereas 15 wt\% Fe3O4-FMWCNT showed low Cs of 47 mF/cm2 and retained 80 \% of its Cs over 5000 cycles whereas only FMWCNT show Cs is 36 mF/cm2 with 54 Ohm. Finally, a solid-state symmetric supercapacitor coin cell with self-standing 25 wt\% Fe3O4-FMWCNT buckypaper showed an excellent power density of 129.5 mW cm-3 and energy density of 3.6 mWh cm-3 is the innovation of the current work. This is mainly attributed to the combined effect of pseudocapacitive behavior from Fe3O4 by faradaic reaction with additional charge transfer resistance and electric double layer (EDLC) behavior from FMWCNTs by non-faradaic of electronic, ionic transport during charging-discharging. As-made solid-state symmetric supercapacitor appears as a high-performance storage device without extra support of current collectors for practical applications and for fabri-cation of planar capacitors.</p>
},
	keywords = {Buckypaper, Power density, specific capacitance, Symmetric supercapacitor},
	issn = {2352-152X},
	doi = {10.1016/j.est.2023.109101},
	author = {Bhaviripudi, Vijayabhaskara Rao and Dwivedi, Pravin K. and Pabba, Durga Prasad and Aepuru, Radhamanohar and Nakate, Umesh T. and Espinoza-Gonzalez, Rodrigo and Shelke, V, Manjusha}
}
