@article {49079,
	title = {Electrocatalytic glycerol conversion: a low-voltage pathway to efficient carbon-negative green hydrogen and value-added chemical production},
	journal = {ACS Applied Materials and Interfaces },
	volume = {16},
	year = {2024},
	month = {MAY },
	pages = {26130-26141},
	type = {Article},
	abstract = {<p>
	Electrochemical glycerol oxidation reaction (GLYOR) could be a promising way to use the abundantly available glycerol for production of value-added chemicals and fuels. Completely avoiding the oxygen evolution reaction (OER) with GLYOR is an evolving strategy to reduce the overall cell potential and generate value-added chemicals and fuels on both the anode and cathode. We demonstrate the morphology-controlled palladium nanocrystals, afforded by colloidal chemistry, and their established morphology-dependent GLYOR performance. Although it is known that controlling the morphology of an electrocatalyst can modulate the activity and selectivity of the products, still it is a relatively underexplored area for many reactions, including GLYOR. Among nanocube (Pd-NC), truncated octahedron (Pd-TO), spherical and polycrystalline (Pd-PC) morphologies, the Pd-NC electrocatalyst deposited on a Ni foam exhibits the highest glycerol conversion (85\%) along with 42\% glyceric acid selectivity at a low applied potential of 0.6 V (vs reversible hydrogen electrode (RHE)) in 0.1 M glycerol and 1 M KOH at ambient temperature. Owing to the much favorable thermodynamics of GLYOR on the Pd-NC surface, the assembled electrolyzer requires an electricity input of only similar to 3.7 kWh/m(3) of H-2 at a current density of 100 mA/cm(2), in contrast to the requirement of \&gt;= 5 kWh/m(3) of H-2 with an alkaline/PEM electrolyzer. Sustainability has been successfully demonstrated at 10 and 50 mA/cm(2) and up to 120 h with GLYOR in water and simulated seawater.</p>
},
	keywords = {electrocatalysis, Glycerol, green hydrogen, nanocube, Palladium, SDG},
	issn = {1944-8244},
	doi = {10.1021/acsami.4c02392},
	author = {Chauhan, Inderjeet and Bajpai, Himanshu and Ray, Bishakha and Kolekar, Sadhu K. and Datar, Suwarna and Patra, Kshirodra Kumar and Gopinath, Chinnakonda S.}
}
@article {49801,
	title = {Potential tuneable glucose oxidation to selective C6 molecules and CC cleavage, and parallel green H2 production: sustainable high current density electrolysis},
	journal = {Chemical Engineering Journal},
	volume = {529},
	year = {2026},
	month = {FEB},
	pages = {172633},
	type = {Article},
	abstract = {<p>
	Current study elucidates the electrocatalytic efficacy of palladium-nanocubes (Pd-NCs) for the selective oxidation of glucose to value-added chemicals with concomitant hydrogen evolution. The Pd-NC catalyst demonstrated exceptional activity and product selectivity, achieving nearly quantitative glucose conversion (\&gt;99 \%) with high gluconic and glucaric acid yield at low anodic overpotential (0.6 V vs. RHE) in alkaline electrolyte. At not-so-high elevated potentials (1.2 V vs. RHE), oxidative CC scission prevails, yielding shorter-chain carboxylates along with C6-acids. Reaction products are thoroughly characterized and quantitatively estimated by NMR spectral methods; NMR methods also provide CC cleavage and mechanistic pathways of glucose to various products. Complementary DFT calculations delineate the thermodynamic favorability of glucose adsorption on Pd-NC surfaces (-1.83 eV) and the exergonic oxidation pathway under applied bias, corroborating experimental product distributions. In a two-electrode electrolyzer, Pd-NC anode paired with Pt/C and Ni2P cathode demonstrates 100 mA/cm(2) at 0.99 V and 1.37 V, respectively, with 48 \% reduction in energy input (26.6 kWh/kg H-2) compared to conventional alkaline electrolysis; critically, H-2 production energy is lower than the usable energy (33.3 kWh/kg H-2). Sustainable chronopotentiometric assays confirm sustainability (similar to 140 h) in alkaline as well as saline electrolytes, underscoring the system{\textquoteright}s resilience against chloride-mediated corrosion. Present work establishes a proof of concept for integrated biomass-component valorization and carbon-negative green hydrogen production, merging atomic-level mechanistic insights with scalable reactor design. Optimization of reaction parameters, including potential tuning, reaction temperature and electrolyte engineering, offers a compelling strategy to further enhance C6 and fragmented product selectivity and overall system efficiency.</p>
},
	keywords = {biomass valorization, electrocatalysis, energy conversion, Sustainability},
	issn = {1385-8947},
	doi = {10.1016/j.cej.2026.172633},
	author = {Chauhan, Inderjeet and Patra, Kshirodra Kumar and Vijay, Pothoppurathu M. and Nalajala, Naresh and Mehta, Shweta and Joshi, Kavita and Ravindranathan, Sapna and Gopinath, Chinnakonda S.}
}
