@article { ISI:000344791100009, title = {Metallic few-layer flowerlike VS2 nanosheets as field emitters}, journal = {European Journal of Inorganic Chemistry}, number = {31}, year = {2014}, month = {NOV}, pages = {5331-5336}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

We report first-principles DFT calculations of the single-layer VS2 work function, the experimental synthesis of flower-like few-layer-thick VS2 nanosheets by a simple one-step hydrothermal method, and the investigation of their field emission properties. The turn-on field required to draw emission current densities of 1 and 10 mu A/cm(2) were 4 and 5.01 V/mu m, respectively. The observed turn-on field values are attributed to the high field enhancement factor (ca. 2500), which is due to presence of sharp protrusions in the VS2 nanosheets. Furthermore, the field-emission current stability of the VS2 emitter shows stable behavior over a period of 12 h. Further, DFT calculations show that the work function (f) of the single-layer VS2 emitter is 6.01 eV.

}, keywords = {Density functional calculations, field emission, Layered compounds, Nanostructures, Sulfur, Vanadium}, issn = {1434-1948}, doi = {10.1002/ejic.201402448}, author = {Rout, Chandra Sekhar and Khare, Ruchita T. and Kashid, Ranjit V. and Joag, Dilip S. and More, Mahendra A. and Lanzillo, Nicholas A. and Washington, Morris and Nayak, Saroj K. and Late, Dattatray J.} } @article { ISI:000357868100006, title = {Electrochemically exfoliated black phosphorus nanosheets - prospective field emitters}, journal = {European Journal of Inorganic Chemistry}, number = {19}, year = {2015}, month = {JUL}, pages = {3102-3107}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

Herein we report field emission (FE) investigations on an electrochemically exfoliated few-layered black phosphorus nanosheet emitter at a base pressure of approximately 1x10(-8) mbar. The turn-on electric field required to draw an emission current density of approximately 10 A/cm(2) is found to be about 4.2 V/m. Furthermore, few-layered black phosphorus nanosheet emitters deliver an emission current density of about 170 A/cm(2) at an applied field of about 7.5 V/m. The emission current vs. time plot measured at preset current values of about 5 A shows emission current fluctuations within +/- 10\% of the average value, indicating the highly stable nature of the black phosphorus field emitter. Thus, the 2D black phosphorus nanosheets synthesized using the simple electrochemical exfoliation method can be utilized for micro/nanoelectronics and flat panel FE display applications.

}, keywords = {field emission, Layered compounds, Nanostructures, Phosphorus}, issn = {1434-1948}, doi = {10.1002/ejic.201500145}, author = {Erande, Manisha B. and Suryawanshi, Sachin R. and More, Mahendra A. and Late, Dattatray J.} } @article { ISI:000352803900014, title = {Exfoliation of bulk inorganic layered materials into nanosheets by the rapid quenching method and their electrochemical performance}, journal = {European Journal of Inorganic Chemistry}, number = {11}, year = {2015}, month = {APR}, pages = {1973-1980}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

We report herein the results of our investigations on the synthesis of transition-metal dichalcogenide (TMDC) semiconductor layered materials of MoS2, WS2, MoSe2, and WSe2 by the rapid quenching method. The bulk powders were added to deionized water in a polypropylene tube and subsequently flushed with argon gas. Thirty rapid freezing (30 s in a liquid nitrogen bath) and heating (20 min in an oil bath at 60 degrees C) cycles were then carried out. The reaction product was obtained in a yield in excess of 60 wt.-\%, which indicates that the method can be utilized on an industrial scale for the production of 2D nanosheets. The as-synthesized products were then characterized by TEM, which revealed nanosheet-like morphologies. Raman spectroscopy confirmed the high quality of the nanosheet samples. The exfoliated samples also showed good electrochemical performance. Of the TMDC samples investigated, the WSe2 nanosheets were found to give the best performance due to their uniform morphology, large surface area, and fewest number of defects.

}, keywords = {chalcogenides, Electrochemistry, Layered compounds, Molybdenum, Nanostructures, Tungsten}, issn = {1434-1948}, doi = {10.1002/ejic.201500039}, author = {Chakravarty, Disha and Late, Dattatray J.} } @article { ISI:000351435100014, title = {Microwave-assisted synthesis of few-layered TaTe2 and its application as supercapacitor}, journal = {European Journal of Inorganic Chemistry}, number = {9}, year = {2015}, month = {MAR}, pages = {1598-1603}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

We report a simple and rapid microwave-assisted synthesis of tantalum telluride (TaTe2) nanosheets. The ratio of tantalum pentachloride (TaCl5) and elemental tellurium (Te) powder were adjusted in the presence of NaBH4 in such a way as to obtain the TaTe2 nanosheet. The samples were characterized by various techniques such as scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), UV/Vis spectroscopy, photoluminescence (PL) spectroscopy, and XRD. Our SEM, TEM, and AFM results show the formation of sheet-like morphology, while the XRD data confirms the high crystalline quality and stable phase of the TaTe2 formed. The supercapacitor cells were fabricated by using TaTe2 nanosheets as anode material, platinum metal wire as a counterelectrode, and Ag/AgCl as reference electrode. The calculated coulombic efficiency is more than 95\%, while the cycle-to-cycle decrease in capacity is less than 5\%. The maximum discharge or charging capacity is below 2.4 Wh/kg, which is an ideal characteristic for achieving supercapacitor behavior.

}, keywords = {Microwave chemistry, Nanostructures, Supercapacitors, Tantalum, Tellurium}, issn = {1434-1948}, doi = {10.1002/ejic.201403220}, author = {Chakravarty, Disha and Kumar, Praveen and Ugale, Vaishali S. and Late, Dattatray J.} } @article { ISI:000369679500020, title = {Synthesis and self-assembly of dumbbell shaped ZnO sub-micron structures using low temperature chemical bath deposition technique}, journal = {Materials Chemistry and Physics}, volume = {169}, year = {2016}, month = {FEB}, pages = {152-157}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

We report well dispersed horizontal growth of ZnO sub-micron structures using simplest technique ever known i.e. chemical bath deposition (CBD). A set of samples were prepared under two different cases A) dumbbell shaped ZnO grown in CBD bath and B) tubular ZnO structures evolved from dumbbell shaped structures by dissolution mechanism. Single phase wurtzite ZnO formation is confirmed using X-ray diffraction (XRD) technique in both cases. From the morphological investigations performed using scanning electron microscopy (SEM), sample prepared under case A indicate formation of hex bit tool (HBT) shaped ZnO crystals, which observed to self-organize to form dumbbell structures. Further these microstructures are then converted into tubular structures as a fragment of post CBD process. The possible mechanism responsible for the self-assembly of HBT units to form dumbbell structures is discussed. Observed free excitonic peak located at 370 nm in photoluminescence (PL) spectra recorded at 18 K indicate that the micro/nanostructures synthesized using CBD are of high optical quality. (C) 2015 Elsevier B.V. All rights reserved.

}, keywords = {Electron microscopy (STEM, Microstructure, Nanostructures, Optical properties, Photoluminescence spectroscopy, Raman spectroscopy and scattering, TEM and SEM)}, issn = {0254-0584}, doi = {10.1016/j.matchemphys.2015.11.042}, author = {Borade, P. and Joshi, K. U. and Gokarna, A. and Lerondel, G. and Walke, P. and Late, Dattatray J. and Jejurikar, S. M.} } @article {46672, title = {Inhibition of quorum sensing, motility and biofilm formation ofpseudomonas aeruginosaby copper oxide nanostructures}, journal = {Journal of Cluster Science}, volume = {32}, year = {2020}, month = {OCT}, pages = {1531 - 1541}, type = {Article; Early Access}, abstract = {

Quorum sensing (QS) is the communication between bacterial cells governed by their population density and regulated by the genes controlling virulence factors and biofilm formation. Multiple mechanisms of biofilms are resistive to antimicrobial chemotherapy; therefore novel strategies are required to overcome its limitations. Here, we report the effect of various copper oxide nanostructures (CuO-NSs) on quorum sensing inhibition. The two-dimensional CuO-NSs such as interlaced nanodiscs, nanodiscs and leaf-shaped nanosheets are prepared via a simple chemical method. The Quorum sensing inhibition (QSI) activity of all the CuO-NS are examined using reporter strainChromobacterium violaceumCV026 andEscherichia colipSB1142. We found that the CuO-interlaced nanodisc structures exhibit better QSI activity than nanodiscs and leaf-shaped sheets. The interlaced nanodisc structures are inhibited various long-chainN-acyl homoserine lactones (AHLs) mediated QS individually and confirmed by other QS-associated phenomena forPseudomonas aeruginosa, including biofilm inhibition, inhibition of virulence factors such as pyocyanin, protease production and swarming motility. Thus QSI activity of CuO-NSs is solely dependent on specific shape offering large surface area and more active sites. The CuO-NS is effective quorum sensing inhibitors, which has potential clinical applications in the management ofP. aeruginosaassociated infections.

}, keywords = {aeruginosa, Biofilm, Nanostructures, P, quorum sensing, Virulence factors}, isbn = {1572-8862}, issn = {1040-7278}, doi = {10.1007/s10876-020-01916-2}, author = {Desai, Dnyanada G. and Swarali, H. and Navale, Govinda R. and Prabhune, A. and Late, Dattatray J. and Dharne, Mahesh S. and Walke, Pravin S.} }