@article {47591,
	title = {Design and scale-up of continuous di-nitration reaction using pinched tube flow reactor},
	journal = {Journal of Flow Chemistry},
	volume = {11},
	year = {2021},
	month = {SEP},
	pages = {611-624},
	type = {Article},
	abstract = {Scale-up of the di-nitration reaction for synthesis of selective herbicide pendimethalin using only nitric acid in continuous flow is presented in this work. This work showcases an approach for smooth scale-up for an herbicide for a production capacity of 50 kg/day using a pinched tube reactor. The approach begins with the batch experiments followed by flow synthesis using a 1/8-inchSS316 helical coil tube where kinetics of the di-nitration was determined, and process optimization was done. Systematic approach was followed for quantification of heat transfer, mass transfer and residence time distribution and scale-up. Detailed scale-up methodology is presented with effect of relevant parameters for successful scale-up. Modular pilot plant with inline quenching, extraction and separation are some of the salient features presented in this work.},
	keywords = {continuous flow, nitration, Pinched tube, RTD, scale-up},
	issn = {2062-249X},
	doi = {10.1007/s41981-021-00182-1},
	author = {Hussain, Arshad and Sharma, Mrityunjay and Patil, Suneha and Acharya, Roopashree B. and Kute, Mahesh and Waghchaure, Aishwarya and Kulkarni, Amol A.}
}
@article {48069,
	title = {Direct (hetero)arylation (DHAP) polymerization of conjugated polymers - new A-B-A monomer design for P(NDI2OD-T2) \& the challenges of adopting DHAP for continuous flow processes},
	journal = {Journal of Materials Chemistry C},
	volume = {10},
	year = {2022},
	month = {SEP},
	pages = {13025-13039},
	type = {Article},
	abstract = {<p>
	P(NDI2OD-T2), also known as Polyera ActivInk N2200, was synthesized by the atom-economic direct hetero arylation polymerization (DHAP) route using a newly designed A-B-A monomer. The new monomer design involved flanking naphthalene diimide with bithiophene units in the bay position, which was further polymerized with bay substituted 1,4-dibromo naphthalene diimide, to afford the same polymer structure as P(NDI2OD-T2). The new monomer design resulted in a very high molecular weight (M-n: 99.5 kDa, D-M: 2.8) defect-free polymer in a quantitative yield by the DHAP batch process using 1,2,4-trichlorobenzene (TCB) as the solvent. DFT studies revealed that the abstraction of the alpha-proton from the naphthalene diimide substituted 2,2 {\textquoteleft}-bithiophene was favorable by 2.6 kcal mol(-1) (Delta Delta G) as compared to that from 2,2 {\textquoteleft}-bithiophene. The reason for this improved C-H activation at the alpha position can be attributed to the presence of C-HMIDLINE HORIZONTAL ELLIPSIS pi stabilizing interactions in naphthalene diimide substituted 2,2 {\textquoteleft}-bithiophene, which strengthens upon the extended charge delocalization throughout the ring, thus stabilizing the conjugate base generated after the proton abstraction. Continuous flow polymerization was carried out by pumping the DHAP reaction mixture including the monomers, catalyst, and additive (pivalic acid) solubilized in degassed TCB through a pre-heated glass condenser packed with K2CO3 and Celite under aerobic conditions. Reproducible molecular weights of M-n: 29.5 kDa, D-M: 1.7 were obtained at much lower concentrations of reactant mixture compared to that for batch polymerization. This is the first report of the synthesis of P(NDI2OD-T2) by a Continuous Flow Process adopting the DHAP route to obtain a defect-free polymer with reasonable molecular weights. P(NDI2OD-T2) was also synthesized by Stille polymerization as a reference control sample to compare the thermal and charge carrier transport properties of the DHAP polymers. Organic field-effect (OFET) mobility measurements indicated mobility values in the order of 10(-3) cm(2) V-1 s(-1) for the DHAP batch polymer (using the novel monomer design). The P(NDI2OD-T2) synthesized by DHAP batch using the commonly used starting materials - bisbromo naphthalene diimide and bithiophene, exhibited OFET mobilities which were one order less, similar to 10(-4) cm(2) V-1 s(-1). This observation highlights the importance of structural design in the monomer to enhance reactivity and thereby the bulk properties using the DHAP route.</p>
},
	issn = {2050-7526},
	doi = {10.1039/d2tc02514k},
	author = {Kakde, Navnath R. and Bharathkumar, H. J. and Wavhal, Bhaiyyasaheb A. and Nikam, Arun and Patil, Suneha and Dash, Soumya Ranjan and Vanka, Kumar and Krishnamoorthy, K. and Kulkarni, Amol and Asha, S. K.}
}
