@article {46044,
	title = {Superior humidity sensor and photodetector of mesoporous ZnO nanosheets at room temperature},
	journal = {Sensors and Actuators B-Chemical},
	volume = {293},
	year = {2019},
	month = {AUG},
	pages = {83-92},
	type = {Article},
	abstract = {<p>Miniaturized sensor technology is vastly demanding multifunctional materials to fulfill many requirements simultaneously; instead of integrating various sensors into a single device. Efficient operation of these miniaturized sensors at room temperature is highly feasible and cost-effective. The humidity sensing and photodetection is precise merit of sensing in special usage like artificial skin. Sensitivity enhancement in both humidity and photodetection required the high surface area for adsorption as well as a high charge transfer mechanism. The two dimensional (2D) zinc oxide nanosheets (ZnO NS) is the ultimate structure for dimensionally confined transport properties owing to the specific surface atomic configuration that results in high sensitivity, low operating temperature, fast response and recovery, and improved selectivity. Furthermore, introducing porosity into 2D nanostructures has opened new opportunities to enhance the efficiency of sensors and detectors via increasing large surface area and tunable physical and chemical properties. Here we report preparation of mesoporous and highly crystalline 2D ZnO NS by a single step, template free, cost-effective chemical method. The structural and morphological characterizations of ZnO NS are carried out using XRD, FESEM, XPS, TEM respectively. The high-resolution TEM images emphasize sheet-like morphology with a thickness of around 18-22 nm. Further the mesoporous ZnO NS (MZNS) with the pore size between 5-10 nm are achieved by simple heat-treatment. XPS and PL study is confirming the oxygen deficiency in MZNS. The MZNS exhibits an excellent responsivity than PZNS with a fast response and rapid recovery time of 25 s and 5 s respectively along with good cyclic stability which is highly crucial for smart humidity sensor. Furthermore, it considerably enhances photo-sensor performance than pristine ZnO NS (PZNS) with (similar to)1 s response time as well as (similar to)1 s recovery time along with better stability. These promising results illustrate the great potential of MZNS for next-generation humidity sensors and photodetectors.</p>
},
	keywords = {humidity sensor, Mesoporous, nanosheets, Photo-detector},
	issn = {0925-4005},
	doi = {10.1016/j.snb.2019.04.086},
	author = {Gupta, Shobhnath P. and Pawbake, Amit S. and Sathe, Bhaskar R. and Late, Dattatray J. and Walke, Pravin S.}
}
@article {48342,
	title = {Titanium trisulfide nanosheets and nanoribbons for field emission- based nanodevices},
	journal = {ACS Applied Nano Materials},
	volume = {6},
	year = {2023},
	month = {JAN},
	pages = {44-49},
	type = {Article},
	abstract = {<p>
	The field emission (FE) properties of TiS3 nanosheets and nanoribbons, synthesized by direct sulfuration of bulk titanium, are investigated. The nanosheets show an enhanced FE behavior with a low turn-on field of similar to 0.3 V/ mu m, required for drawing an emission current density of similar to 10 mu A/cm2. Interestingly, the TiS3 nanosheet emitter delivered a large emission current density of similar to 0.9 mA/ cm2 at a relatively low applied electric field of similar to 0.4 V/mu m. We have estimated the values of the field enhancement factor (beta), which are found to be similar to 5 x 104 for the TiS3 nanosheet emitter and similar to 4 x 103 for the nanoribbon emitter. We attribute the superior FE performance to the presence of atomically sharp edges and the reduced thickness of TiS3, as reflected in the high value of beta. In fact, the nanosheet sample presents a higher density of ultrathin layers (similar to 12 nm-thick), and thus, they have a larger edge to volume ratio than the nanoribbon samples (which are similar to 19 nm-thick). The superior FE behavior of TiS3 nanosheets over nanoribbons makes them a propitious field emitter and can be utilized for various FE-based applications, demanding large emission currents and lower operational voltages. Moreover, the FE current stability recorded on these samples confirms their promising performance. Thus, the present investigation brings out a great promise of TiS3 nanosheets and nanoribbons as field emitters for vacuum nanoelectronics devices.</p>
},
	keywords = {Current stability, field emission, nanoribbon, nanosheets, TiS3},
	doi = {10.1021/acsanm.2c03460},
	author = {Pawbake, Amit S. and Khare, Ruchita T. and Island, Joshua O. and Flores, Eduardo and Ares, Jose R. and Sanchez, Carlos and Ferrer, Isabel J. and Pawar, Mahendra and Frank, Otakar and More, Mahendra A. and van der Zant, Herre S. J. and Castellanos-Gomez, Andres and Late, Dattatray J.}
}
